David L. Olson

John Henry Moore Distinguished Professor of Metallurgical Engineering

Education: BS Washington State University; Ph.D. Cornell University / PE State of Colorado, Professional Engineer

Research Interests: Welding and joining science; metallurgy of reactive metals; environmental degradation of materials; advanced NDE alloy microstructural stability assessment.

Phone: 303-273-3955

FAX: 303-384-2189

E-mail: dolson@mines.edu

 

 

 

 

 

 

 

 

 



I perform research in four areas: welding metallurgy, reactive metal metallurgy, corrosion, and advanced nondestructive evaluation. This research includes the pyrochemical behavior of welding consumables, influence of microcompositional gradients on weld properties, weld microstructure-property relationships, and the predictability of weld properties from knowledge of compositional and process parameters.

The processing and behavior of reactive metals and their containment are being studied; they are important in many technologies. Calcium, lithium, titanium, cerium, actinides and other reactive materials are among the subjects of investigation.

I also explore alloy phases and microstructural stability by the use of electromagnetics and other physical nondestructive techniques. Major improvements can be made in our ability to evaluate service life and the influence of materials processing using these nondestructive analytical techniques.

Aqueous microbiological influenced corrosion and high-temperature corrosion research are in process. Advanced corrosion sensors are of research interest. Pipeline steel and boiler steel metallurgy and corrosion are being investigated

Honors
AIME Student Chapter President (W.S.U.)
Alpha Sigma Mu (Metallurgical Honorary)
Tau Beta Pi (Engineering Honorary)
Sigma Xi (Research Honorary of North America)
Theta Tau (Engineering Honorary)
Blue Key (Engineering Honorary)
Ohio State University Post Doctoral Fellowship (1971 72)
Bradley Stoughton Award for Young Teachers of Metallurgy, ASM (1976)
Outstanding Young Member Award, Rocky Mountain Chapter, ASM (1977)
Comfort A. Adams Four Year Membership Award for Teaching, AWS (1978)
MSTD Literary Award, ANS (1978)
Faculty Intern Program, ASTM (1981)
Department of State Scholar Diplomat Program (May, 1981)
AMOCO Foundation Teaching Award, CSM (1982)
International Metallographic Society Award, Third Place Nonferrous Class (1982)
Listed in AAES Who's Who in Engineering
Listed in the American Men and Women of Science
ADAMS Lecture and Award, Dallas, TX, AWS, (April, 1984)
McKay Helm Award, Las Vegas, Nevada, AWS, (April, 1985)
ASM Fellow, Toronto, Ontario, ASM (October, 1985)
McKay Helm Award, Atlanta, Georgia, AWS (April 1986)
Warren F. Savage Award, Chicago, IL, AWS (March 1987)
McKay Helm Award, Washington, D.C., AWS (April 1989)
McKay Helm Award, Anaheim, CA, AWS (April 1990)
Burlington Northern Foundation Faculty Achievement Award, CSM (April 1990)
Charles H. Jennings Memorial Award, Detroit, MI, AWS (April 1991)
William Irrgang Award, Chicago, IL, AWS (March 1992)
Nils Christensen Award, Golden, CO, AWS-CSM Student Chapter, (March, 1992)
AWS Fellow, Houston, TX, AWS (April 1993)
R. D. Thomas Award, Philadelphia, PA, AWS (April 1994)
Honorary Membership Award, Cleveland, OH, AWS (April 1995)
William Spraragen Award, Chicago, IL, AWS (April 1996)
Dean's Excellence Award, Colorado School of Mines (April 1997)
1998 Light Metals Reactive Metal Award, TMS, San Diego (March 1999)
1999 TTCP Achievement Award, U.S. Department of Defense, Pentagon, Washington, DC (April 2000)
Foreign Member of National Academy of Sciences (Materials Science) of Ukraine, Kiev (April 2000)
Arata Medal and Prize, International Institute of Welding, Ljubljana, Slovenia (July 2001)
William Spraragen Award, Chicago, IL, AWS (March 2002)
William Spraragen Award , Detroit, MI, AWS (April 2003)
CSM 2003 Faculty Senate Distinguished Lecturer, CSM (February 2004)
2004 ASNT Fellowship Award (Advisor-Student Award), Las Vegas, NV, ASNT (November 2004).
McKay-Helm Award, Dallas, Texas, AWS (April 2005)
2005 ASNT Fellows hip Award (Advisor-Student Award), Columbus, OH, ASNT (October 2005).
ASM Life Membership Award, (March 2007)

Service
ASM, Rocky Mountain Chapter (Chairman, 1981 82)
ASM Handbook Committee (l980 1992, Chairman 1990-1992)
ASM Joining Division Council (Chairman, 1983 85)
ASM Publication Council (1990 1992)
ASM AIME TMS Joint Commission on Met. Trans. (1990 1993)
AWS Welding Research and Development (1987 present, Chairman 1991-1993)
AWS Fellow Selection Committee (1990 1996)
AWS Nominating Committee (1993-1994)
Kiwanis Club, Golden (President, 1978 79)
Relations with Industry Representative (ASEE) for Colorado School of Mines (1972 1983)
Welding Research Council (University and Weldability Committees) (1978 present)
Marine Board (National Academy of Science) Committees, Committee of Marine Structures and
Material Advisory Group (1985 1990)
International Institute of Welding (IIW), United States Delegate to Commission IV and Expert to
Commissions I, II, IX, XII, Study Group 212 (1982 present)
National Materials Advisory Board (National Academy of Science) Committee on Advanced
Joining Technology 1981 82
Member of Independent Review Association which performed a critical review for D.O.E. of the
proposed National Strategy Document for T.R.U. nuclear waste disposal (1979)
Member of U.S. Technical Delegation to establish United States Indian Welding Research Program
(PL480 Funds) (1986), (1993).
Member of U.S. Delegation to the U.S.-Argentinean (USNSF-Argentinean AEC) Welding Research
Workshop, Buenos Aries, Argentina (Dec. 1992).
Member of the Board for Manufacturing Sciences, Inc., Boulder, Colorado (1982 1984)
Member of the Board of Directors, Associated Western Universities, Inc. (1989 1990)
Member (Key Reader) of Board of Review of Metallurgical Transactions A (1987 present),
(Chairman 1990)
Member of the Interim Board, the American Welding Technological Application Center (Now
AWI), Knoxville, TN, (1983 1984).
Member of Board, American Welding Institute, Knoxville, TN (1987 June 1993)
Member of Board, Colorado Innovation Foundation, Golden, CO (1988 1990)
Member of Board, "Colorado GEM Networking", Golden, CO (1991-1992)
Member of Board, Earth Resources Consortium, Denver, CO (1992-1994)
Member of Technical Advisory Committee, DOE-BES Welding Process Control and Project at
MIT and INEL (1987-1996)
Site Visitor for National Research Council (NRC) Research Assistantship
Program, Visited USBM Albany Research Center, September (1993).
Interim Executive Director, Colorado GEM, a Mineral Industry, State of Colorado and Colorado
School of Mines promotional and networking Organization (January 1990-June 1991).
Member, International Committee for the First International Conference on Materials and
Manufacturing (MATEHN '94), Technical University of Cluj-Napoca, Cluj-Napoca,
Romania, May 18-20 (1994).
Participant in U.S.-Russia NATO Cooperative Research Project on Synthesis of Advanced
Materials Using th

e SHS Process, with J. Moore and D. Readey, June (1994)
Focus Officer, DOD-TTCP Project on "Hydrogen and Preheat Management in Welded High
Strength Steel, PTP-1-S11 (1994-Present).
Member, Visiting Team to Review the Materials Program at Ben Gurion University of the Negev,
Beer-Sheva, Israel, March (1999).
U.S. Delegate to International Ship and Offshore Structure Congress (2000-2003)
Member, CSM Academy (1998-present)
Member, CSM Faculty Senate (2001-2002)
Member of James Douglas Gold Medal Committee, AIME (2004-2007)
Member of the Education Committee, TMS (2006-2009)
Review papers and proposals

Professional Societies
American Ceramics Society (ACS)
American Institute for Metallurgical Engineering (AIME TMS)
American Physical Society (APS)
American Nuclear Society (ANS)
American Society for Materials (ASM)
American Society for Non Destructive Testing (ASNT)
American Welding Society (AWS)
Iron and Steel Society (ISS) (25 years)
Materials Research Society (MRS)
National Association of Corrosion Engineers (NACE)
National Institute of Ceramic Engineers (NICE)
New York Academy of Science (NYAS) (1975)

Research Experience
Welding and Joining Processes
Welding Pyrometallurgy and Consumables
Welding Physical Metallurgy
Non-destructive Evaluation
Aqueous Corrosion
High Temperature Corrosion
Liquid Metal Corrosion
Corrosion Protection and Coatings
Phase Stability and Transformation
Reactive Metals Metallurgy and Technology
Actinide Metallurgy
Microstructural Evaluation in Thin Films
Engineering Alloys and Ceramics

Thesis Advisory
Completed: 37 Ph.D. Degrees, 73 MS Degrees
In Progress: 4 Ph.D. Candidates, 8 MS Candidates

 

Patents

1. D. L. Olson and A. M. Davila, "Cast Iron Welding Materials and Method", U.S. Patent 4,534,793 (August 13, 1985).

2. D. L. Olson and A. M. Davila, "Cast Iron Welding Materials", European Patent EP0038820 and West Germany Patent P3071827.5, November 12 (1986).

3. D. L. Olson and A. Davila Marquez, "Cast Iron Welding Electrodes", U.S. Patent Number 4,726,854, February 23 (1988).

4. R. D. Smith, D. K. Benson, T. R. Wildeman, and D. L. Olson, "Sensor for Testing the Diffusible Hydrogen Content of Welded Steel", U.S. Provisional Patent Application, NREL File No. PROV/99-03, June 7, 1999.

5. D. K. Benson, T. R. Wildeman, R. Davis Smith, and D. L. Olson, "Method of Apparatus for Determining Diffusible Hydrogen Concentrations", International Patent Classification: G01N 21/17, 2/01, 33/20; International Application Number: PCT/US00/15752 (June 8, 2000), International Publication Number W0 00/75634 Al, Publication Date December 14, 2000.

6. David K. Benson, Thomas R. Wildeman, R. Davis Smith and David L. Olson, "Method an Apparatus for Determining Diffusible Hydrogen Concentration", Australian Patent No. 762019, Standard Patent, Application Number AU 200054732B2/00, 2 October 2003.

7. David K. Benson, Thomas R. Wildeman, R. Davis Smith and David L. Olson, "Method an Apparatus for Determining Diffusible Hydrogen Concentration", United States Patent Number 7,306,951, December 11, 2007.

 

Books: Authored and Edited

1. D.L. Olson, "Surface Self Diffusion of Gold", Ph.D. Thesis, Cornell University, Diss. Abstr. Int. B 31, 2015 (1970).

2. D. L. Olson, "An International Workshop on Quality in Underwater Welding of Marine Structures",
Proceedings, Colorado School of Mines Press, Golden, Colorado, November 4-6, 1985

3. L. J. Korb and D. L. Olson (Coordinating Editors), Corrosion Handbook, ASM Handbook, vol. 13, ISBN: 0-87170-007-7 (TA459.M43), 1415 pages, ASM, Materials Park, Ohio (1987).

4. J. L. McCall, D. L. Olson, and I. LeMay, (Editors), "Metallography and Interpretation of Weld Microstructures", Symposium Proceedings, ISBN: 0-87170-293-2, Lib. of Congress #87-071104, pp. 1 393, ASM International, Materials Park, Ohio (1987).

5. D. L. Olson and C. E. Cross, "Curso de Actualizacion de Nivel Superior en Metalurgia de La Soldadura", Collection of Papers, Buenos Aires, Argentina, July 27 30 (1987).

6. D.L. Olson, "Welding Metallurgy", Course Taught in China, papers (three volumes) were translated to Chinese, Northwestern Polytechnical University, Xian, China, May (1988).

7. D. L. Olson, R. Dixon and A. L. Liby (Editors), Welding Theory and Practice, Materials Processing Theory and Practices Series, 8, ISBN: 0-444-87427-5 (TS227.W4154), pp. 1 389, North Holland Physics, Elsevier Science, NY, NY (1989).

8. D. L. Olson and T. A. North (Editors), Ferrous Alloy Weldments, 13 Chapters, ISBN: 087849-544-4, pp. 1-415, Trans. Tech. Publications, Ltd., Zurich, Switzerland March (1992).

9. D. L. Olson, T. A. Siewert, S. Liu, and G. R. Edwards (Coordinating Editors), ASM Handbook: Welding and Joining, 10th edition, vol. 6, pp. 1-1299, ISBN: 077170-382-3, ASM, Materials Park, OH (1993).

10. S. Liu, D.L. Olson, J. S. Spenser, and C. Smith (Editors), Proc. of International Workshop on "Underwater Welding of Marine Structures", held December 7-9, 1994, New Orleans, LA, pp. 1-451, ISBN: ISBN 0-918062-77-2, American Bureau of Shipping, New York, NY (1995).

11. J. L. Davidson and D. L. Olson (Editors), "Hydrogen Management in Steel Weldments", Conf. Proceedings, pp. 1-181, Melbourne, October 23, 1996, ISBN 0-7311-0809-4, WTIA, Brighton, Vic., Australia (1997).

12. G. R. Edwards, W. Hanzalek, S. Liu, D. L. Olson, and C. Smith (Editors), Proc. of International Workshop on Advanced Materials for Marine Structures, February 4-7, 1997, New Orleans, LA, pp. 1-522, ISBN: 00-918062-72-1, American Bureau of Shipping, New York, NY (1997).

13. J. E. M. Braid, C.V. Hyatt, D. L. Olson, and G. N. Vigilante, Hydrogen Management for Welding Applications, pp. 1-282, Proc. Intern. Workshop, October 6-8, 1998, ISBN: 0-662-27989-1, CANMET, Ottawa, Canada (1999).

14. G. R. Edwards, W. Hanzalek, S. Liu, D.L. Olson, and C. E. Smith, Proceedings of International Workshop on "Corrosion of Marine Structures and Pipelines", February 9-11, 1999, Galveston, Texas, ISBN 0-918062-14-4, pp. 1-526, American Bureau of Shipping, Houston, TX (2001).

15. B. Dixon, C. Smallbone, R. Phillips, and D. L. Olson, Proceedings on the International Conference on "Technological and Research Developments in Welded Defense Equipment", pp 1-266, 18-19 March, 2002, The Welding Technology Institute of Australia, Silverwater, NSW, 1811 (2002).

16. D. L. Olson, G.R. Edwards, P. Bollinger, A. N. Lasseigne and G. Atkins, "Materials and Practices to Improve Resistance to Fuel Derived Environmental Damage In Land and Sea- Based Turbines", Workshop Proceedings, EPRI Technical Report #1009173, pp.1-128, EPRI, Palo Alto, California, October (2003).

17. Charles Smith, Tom Siewert, Brajendra Mishra, David Olson and Angelique Lasseigne, "Coatings for Corrosion protection: Offshore Oil and Gas Operation Facilities, Marine Pipeline and Ship Structure", NIST Special Publication 1035, Proceedings of Workshop, Biloxi, Mississippi, April 14-16, 2004, NIST, Boulder, Co , (2005).

 

Publications: Interfaces and Advanced Materials

l. J. M. Blakely and D. L. Olson, "Intensity Distribution From a Sinusoidal Grating and Application to Diffusion Measurements", J. Appl. Phys. 39, 3476 3478 (1968).

2. D. L. Olson and J. M. Blakely, "Some Aspects of the Thermal Wave Technique in Solidification Studies", Scripta Met. 2, 351 356, (1968).

3. C. Newton and D. L. Olson, "A Chemical Mechanical Polish for Tungsten", Metallography 1, 249 250 (1968).

4. J. L. Nilles and D. L. Olson, "The Energy of a BCC Iron Deformation Twin Boundary", J. Appl. Phys. 41, 531 532 (1970).

5. D. L. Olson, H. R. Patil, and J. M. Blakely, "Influence of Contaminants on the Surface Self-Diffusion Coefficients of Gold", Scripta Met. 6, 229-240 (1972).

6. W. G. Brown and D. L. Olson, "The Effect of Carbon in Reaction Bonded Silicon Carbide", American Ceramic Bulletin 55 (3), 311 312 (1976).

7. S. M. Wong and D. L. Olson, "Phototransport Damage of Optical Materials", National Bureau of Standards Report on the "Laser Damage Symposium", NBS Report No. 462, 365 (1976).

8. D. L. Olson and D. K. Matlock, "The Hypothetical Diamond Cubic Phase of Lead", J. Phys. Chem. Solids, 42 (9), 805 808 (1981).

9. G. R. Edwards, D. L. Olson, G. P. Martins, B. R. Lanning and P. B. Maxwell, "Infiltration Kinetics and Interfacial Bond Strength in Aluminum Matrix SiC Composite", Proc. Eight Annual Discontinuous Reinforced Aluminum Material Working Group Meeting, Park City, Utah, January 14 16, 1986, MMICAC No. 000684, pp. 219 242, Kaman Tempo, Santa Barbara, California (November 1986).

10. D. L. Olson, G. P. Martins, D. Meendering, and S. Rawal, "Ceramic Bonding: Oxide Adhesives for Metal Matrix Composites", Proc. Eight Annual Discontinuous Reinforced Aluminum Material Working Group Meeting, Park City, Utah, January 14 16, 1986, MMCIAC No. 000684, pp. 281 292, Kaman Tempo, Santa Barbara, California (November 1986).

11. G. P. Martins, D. L. Olson and G. R. Edwards, "Modeling of Infiltration Kinetics for Liquid Metal Processing of Composites", Met Trans. 18 B, 95 101 (1987).

12. C. D. LeBail, C.A. Natalie, G. P. Martins and D. L. Olson, "Sol Gel Synthesis of MgAl204 Spinel Powders for Optical Ceramics", Proceedings of "1st International Conference on Ceramic Powder Processing", A. Cer. Soc., Orlando, FL, November 1 4 (1987); Ceramic Trans. 1, 211 217 (1988).

13. P. B. Maxwell, G. P. Martins, D. L. Olson, and G. R. Edwards, "The Infiltration of Aluminum into Silicon Carbide Compacts", Met. Trans. 21B (6), 475 485 (1990).

14. D. N. Meendering, G. P. Martins, and D. L. Olson, "Cathodic Electrodeposition of Hydrated Alumina from Aqueous Electrolytes", Innovations in Materials Processing Using Aqueous Colloid and Surface Chemistry, pp. 91 106, TMS, Warrendale, PA (1988).

15. G. P. Martins, D. L. Olson, G. R. Edwards, and P. B. Maxwell, "A Flow in Process Media Model for Describing Infiltration Kinetics", Proceedings Ninth Annual Discontinuously Reinforced MMC Working Group Meeting, pp. 585 599, Park City, Utah, January 6 8, 1987, DOD Metal Matrix Composites Information Analysis Center, MMCIAC No. 000695, Kaman Tempo, Santa Barbara, California 93102 1479.

16. B. R. Lanning, G. R. Edwards, and D. L. Olson, "A Semi Empirical Model for Predicting Properties of the Al/SiC Interface", Proc. of the "Eleventh Annual Discontinuously Reinforced MMC Working Group" Meeting, Park City, Utah, February 14 16, 1989, Conf. Proc. Series MMCIAC No. 716, pp. 441 458, Santa Barbara, California, July (1989).

17. P. R. Chidambaram, G. R. Edwards, and D. L. Olson, "Fundamental Issues Concerning the Microdesigning of Metal-Ceramic Interfaces", Presented at Fourth International Conference on Composite Interfaces (ICCI-IV), Composite Interfaces 1, pp. 127-140 (1993).

18. B. Mishra, D. L. Olson, and C. E. Cross, "Selection of Resilient Constituent Parameters for Achieving Composite Properties", Proc. of International Conference on "Advanced Synthesis of Engineered Structures", August 30-September 2, 1992, pp. 125-131, San Francisco, CA (1992).

19. S. Govindarajan, J. J. Moore, B. Mishra, and D. L. Olson, "Physical Vapor Deposition of Molybdenum and Silicon Thin Films", Surface and Coating Technology 68/69, pp. 45-50 (1994).

20. W. Grant, C. Loomis, J. J. Moore, B. Mishra, A. J. Perry, and D. L. Olson, "The Application of Statistical Analysis of Experiments for the Arc Ion Plating (AIP) of TiN", Proc. of Intn. Conf. on Metallic Coatings and Thin Films, pp. , San Diego, CA (1994).

21. S. Govindarajan, J.J. Moore, B. Mishra, D. L. Olson, T. Ohno, and J. Disam, "On the Possibility of Tailoring a Compositional Gradient in Thin Films Sputtered from a MoSi2+XSiC Composite Target", Int. Conf. on Met. Coatings and Thin Films, ICM CTF 96, Paper A1.13, Surface and Coatings Technology 86-87, pp. 33-40 (1996).

22. S. Govindarajan, H. J. Feng, J. J. Moore, D. L. Olson, B. Mishra, and E. A. Levashov, "Reactive Synthesis of Composite Targets Used in Physical Vapor Deposition of Thin Films", Processing and Fabrucation of Advanced Materials IV, pp. 795-802, TMS, Warrendale, PA (1996).

23. S. Govindarajan, J. J. Moore, D. L. Olson, B. Mishra, T. Ohno, E. A. Levashov, and J. Disam, "Composite Thin Films Produced Using Physical Vapor Deposition of Composite Targets, Proceedings of Processing and Fabrication of Advanced Materials IV, pp. 275-286, TMS, Warrendale, PA (1996).

24. S. Thavornum, B. Mishra, J. J. Moore, and D. L. Olson, "Development of Stainless Steel Clad Alloy Steels Bars", Proceedings of Processing and Fabrication of Advanced Materials IV, pp. 79-96, TMS, Warrendale, PA (1996).

25. S. Charoenvilaisiri, B. Mishra, J. J. Moore, and D. L. Olson, "Glass-Fiber Reinforced Formable Steel Composite", Proceedings of Processing and Fabrication of Advanced Materials IV, pp. 471-490, TMS, Warrendale, PA (1996).

26. K. A. Lindahl, D.L. Olson, J. J. Moore, A. Swartzlander, and R. Noufi, "Quantitative Investigation of Reactions in Copper-Indium-Gallium Multilayer Thin Films", pp. 949-952, IEEE 25th PVSC Conference, Washington, DC (1996).

27. S. Govindarajan, B. Mishra, D. L. Olson, and J. Disam, "Synthesis of Molybdenum Disilicide on Molybdenum Substrate", Surface and Coatings Technology, 76-77, pp. 7-13 (1995).

28. K. A. Lindahl, J. J. Moore, D. L. Olson, R. Noufi, and B. Lanning, "Quantitative Investigation of Copper/Indium Multilayer Thin Film Reactions", Paper HH05, ICMCTF96, San Diego, CA, April (1996), Thin Solid Films 290-291, pp. 518-524 (1996).

29. W. K. Grant, C. Loomis, J. J. Moore, D. L. Olson, B. Mishra, and A. J. Perry, "Characterization of Hard Chromium Nitride Coatings Deposited by Cathodic Arc Vapor Deposition", Proc. ICMCTF96 Conference, pp. 1-18, San Diego, CA, April (1996), Surface and Coating Tech., 86-87, pp. 788-796 (1996).

30. E.A. Levashov, V. I. Kosayanin, L. M. Krukova, J. J. Moore, and D. L. Olson, "Structure and Properties of Ti-C-B Composite Thin Films Produced by Sputtering of Composite TiC-TiB2 Targets", Surface and Coating Technology, 92, pp. 34-41 (1997).

31. Y. Andreev, E. A. Levashov, A. Sheveiko, V. I. Kosianin, J. J. Moore, and D. L. Olson, "Electrochemical Corrosion Behavior of SHS-Synthesized D.C. Magnetron Composite TiC-Based Targets and Sputtered Thin Films", Surface and Coating Technology, 90, pp. 42-52 (1997).

32. H. J. Moore, D. L. Olson, and R. Noufi, "Use of Effective Heat of Formation to Determine Phase Formation Sequences of In-Se, Ga-Se, Cu-Se and Ga-In Thin Films", J. Elect. Mats., vol. 27 (12), pp. 1334-1340 (1998).

33. H J. Moore, D. L. Olson, and R. Noufi, "Determination of Phase Formation Sequences and Activation Energies of Copper Indium Gallium, and Selenium Thin Films", Paper H7-2-11, ICMCTF98, San Diego, CA, April (1998).

34. H. J. Moore, D. L. Olson, and R. Noufi, "Elucidation of the Reaction Sequences of Binary and Ternary Systems in CIGS", Proc. of Int. Conf. on Metallurgical Coatings and Thin Films", Paper H1-9, San Diego, CA, American Vacuum Society, April 12 (1999).

35. H. J. Moore, D. L. Olson, and R. Noufi, "Thermodynamic Consideration of CIGS Thin Film Formations", Proc. E-MRS, Spring Meeting, Strasbourg, France, June (1999).

36. D. Eliezer, N.Eliaz, D. Zander and D. L. Olson, "Hydrogen Assisted Material Processing" in Hydrogen Effects on Materials Behavior and Corrosion Deformation Interactions", pp.315-328, TMS, Warrendale, PA (2003).

37. D. Zander, B. Kofmann, D. Eliezer, E. Y. Gutmanas, E. Abramov and D. L. Olson, "Influence of Hydrogen on the Phase Stability and Microhardness in Ti-Nb", in Hydrogen Effects on Materials Behavior and Corrosion Deformation Interactions, pp.345-354,TMS, Warrendale, PA (2003).

38. S. Niyomsoan, W. Grant, D. L. Olson, and B. Mishra, "Variation of Color in Titanium and Zirconium Nitride Decorative Thin Films", Thin Solid Film, 415, pp. 187-194 (2002).

39. D. Zander, D.L. Olson and D. Eliezer, "Mutual Effects of Hydrogenation and Deformation inTi-Nb, Met. Mat. Trans. Vol. 34A (10) pp 2199-2206 (2003).

40. D. Zander, I. Maroef, D. Olson, and D. Eliezer, "Positive Effects of Hydrogen on the Plasticity of 2 ¼ Cr- 1 Mo Steel", J. of Alloys and Compounds, vol. 356-357 pp 809-812 (2003).

41. P. Termsuksawad, S. Niyomsoan, R. B. Goldfarb, V. I. Kaydanov, D. L. Olson, B. Mishra, Z. Gavra, "Measurement of Hydrogen in Alloys by Magnetic and Electric Techniques", Journal of Alloys and Compounds, Vol.373 (1-2), pp. 86-95 (2004).

42. Y. D. Park, D. L. Olson, B. Mishra and Z. Gavra, " Characterization and Prediction of Hydrogen Storage Alloys by Using Electronic Measurements" pp. 69-75, in Proc. 6tth Intl Conf. on New Energy Systems and Conversions, Nov. 9-13, 2003, Busan, Korea (2003).

43. B. Mishra, D. L. Olson, P. Termsuksawad, "Sensing of Hydrogen in Advanced Ni-MH Battery Materials", in Advanced Materials for Energy Conversion II, pp 111-120, TMS, Warrendale, PA, (2004).

44 Y. D. Park, D. L. Olson, A. Landau, and M. Pinkas, "Assessment of Hydrogen cracking in UNS No 05500 Using TEP and XRD Analysis", International Proceedings of NACE 2004, Paper No. 04265, NACE, Houston, TX (2004).

45. S. Niyomsoan, , R. B. Goldfarb, D. L. Olson, V. Kaydanov, Z. Gavra, B. Mishra, V. Kaydanov, Z. Gavra and P. Termsuksawad, 'Hydrogenation of the Zr0.9 Ti 0.1 Cr(x) Fe 2-x Intermetallic Compounds: "Free Electron Model for Magnetic Susceptibility and Thermoelectric Power", submitted to J. Alloys and Intermetallic Compounds (2006).

46 S. Niyomsoam, P. Termsuksawad, D. L. Olson, B. Mishra, V. I. Kaydanov, and Z. Gavra, " The Relationship between the Thermoelectric Power and Phase Transformation in AB2 Hydrogen Storage Materials", submitted to Mat. Sci. Eng. A vol. 391, (1-2) pp 264-271 January 25 (2005).

47. P. Termsuksawad, S. Niyomsoan, B. Mishra, D. L. Olson, Z. Gavra, and V. I. Kaydanov," Prediction of Hydrogen Absorption Behavior in AB5 Hydrogen Storage Alloys by Electronic Techniques", Materials Science and Engineering B, vol.117 (1) , pp 45-51, February 25 (2005).

48. Yeong-do Park, David L. Olson and Brajendra Mishra, Studies on Hydrogen Absorption Properties of LaNi5-xSnx and La0.95 Ni4.6 Sn0.3 alloys using Magnetic and Thermoelectric Power Measurements, J. Intn. Metals and Alloys, (2004).

49. D. Olson and B. Mishra, "Report of the Findings of MMS Offshore Coating Workshop: Reported earlier in NIST Publ. #1035, Coatings for Corrosion Protection: Offshore oil and Gas Operation Facilities, Marine Pipelines and Ship Structures" edited by C. Smith, T. A. Siewert, B. Mishra, D. L. Olson and A. Lasseigne, April 14-16, 2004, Biloxi, Miss., Proceedings of Advanced Coatings Rand D for Pipelines and Related Facilities, NIST Spec. Report # 1044, edited by R. E. Ricker, pp. 16-28, NIST, Gaithersburg, MD, Sept. 7,
2005.

50. A.N. Lasseigne, I. Ashraf, B. Mishra, and D.L. Olson Characterization of Hydrogen Storage Capabilities of the Two-Phase Region of LaNi5", paper and presentation accepted for TMS 2006: Linking Science and Technology for Global Solutions in San Antonio, Texas, (2006).

51. A.N. Lasseigne, I. Ashraf, B. Mishra, D.L. Olson, V. Kaydanov, and R. Goldfarb, "Characterization of Hydrogenation Behavior of NaAlH4 Utilizing Thermoelectric Power and Magnetic Analyses" paper and presentation accepted for TMS 2006: Linking Science and Technology for Global Solutions in San Antonio, Texas, (2006).

52. J.E. Jackson, Y.D. Park, A.N. Lasseigne, C. Sangphagdee, D.L. Olson, B. Mishra, and V. Kaydanov, "Characterization of Engineering Materials Utilizing Thermoelectric Power Measurements", Materials in Clean Power Systems: Applications, Corrosion, and Protection, Edited by Z.G. Yang, K.S. Weil, and M.P. Brady, TMS (The Minerals, Metals & Materials Society) Annual Meeting, pp. 1-10 (2006).

53. A.N. Lasseigne, B. Mishra, and D.L. Olson, "Characterization of Hydrogen Storage Capability in Advanced Battery Materials", Proc. ICAMMP 2006, III, PP 937-948, Khanaspur, India, February 3-5, 2006.

54. J.E. Jackson, D.L. Olson, B. Mishra, and A.N. Lasseigne, "Deposition of Al-Si Metallic Coating Precursor on Mo-Si-B Turbine Materials", paper and presentation accepted for TMS 2006: Linking Science and Technology for Global Solutions in San Antonio, Texas (2006).

55. P. Termsuksawad, S. Niyomsoan, B. Mishra, D. L. Olson, Z. Gavra, and V. I. Kaydanov, " Effect of Hydrogen Absorption on the Magnetic and Thermoelectric Power (TEP) Properties of AB5 Hydrogen Storage Alloys", to be reviewed 1st. by NIST before submission, (2005).

56. S. Niyomsoan, D. L. Olson, R. B. Goldfarb, V. I. Kaydanov, Z. Gavra, B. Mishra and P. Termsuksawad, "Free Electron Model Relation of Magnetic Susceptibility and Seebeck Coefficent as Applied to Hydrogenation of
the Zr0.9Ti0.1CrxTi1-x Intermetallics, to be reviewed 1st by NIST before submission, (2005).

57. Glen Bigelow, Ronald Noebe, Santo Padula II, , Anita Gary, and David Olson, "Development and Characterization of Improved High- Temperature Shape-memory Alloys by Solid Solution Strengthening and Thermomechanical Processing, Conference Proc. of SMST 2006 , (2006).

58. J.E. Jackson, D. L. Olson, B. Mishra and A. N. Lasseigne, "Deposition and Characterization of Al-Si Metallic TBC Precursor on Mo- Si-B Turbine Materials", J. of Hydrogen ----, pp. (2006).

59. B. Mishra, A. N. Lasseigne, and D. L. Olson,"Development of Sensors for Reversible Battery Hydrogen Storage Materials", Proc. of International Congress on Innovative Solutions for the Advancement of the Transport Industry", October 4-6, 2006, San Sebastian, Spain (2006).

60. B. Mishra , A. N. Lasseigne , and D. L. Olson, " Development of High Interstitial Stainless Steels with increased Mechanical Properties and Corrosion Resistance", October 4-6, 2006, San Sebastian, Spain (2006).

61. J.E. Jackson, Y.D. Park, A.N. Lasseigne, C. Sangphagdee, D.L. Olson, B. Mishra, and V. Kaydanov, "Characterization of Engineering Materials Utilizing Thermoelectric Power Measurements", Materials in Clean Power Systems: Applications, Corrosion, and Protection, Edited by Z.G. Yang, K.S. Weil, and M.P.
Brady/, TMS (The Minerals, Metals & Materials Society) Annual Meeting, pp. 1-10 (2006).

62 A. N. Lasseigne, M. A. Inam, V. Kaydanov, B. Mishra, and D. L. Olson, "Chatacterization of Hydrogenization Behavior of NaAl H4 Utilizing Thermoelectric Power and Magnetic Analyses", Advanced Materials for Energy Conversion III, pp 199-206, TMS, Warrendale, PA (2006).

63. A. N. Lasseigne, M. A. Inam, Y. D. Park, V. I. Kaydanov, B. Mishra, and D. L. Olson, " Characterization of Hydrogen Storage Capabilities of the Two-Phase Region of LaNi5", Advanced Materials for Energy Conversion III, pp.127-136, TMS, Warrendale, PA (2006).

64. J.E. Jackson, D.L. Olson, B. Mishra, and A.N. Lasseigne, "Deposition of Al-Si Metallic Coating Precursors on Mo-Si-B Turbine Materials", /TMS 2006 Annual Meeting, MPMD 7th Global Innovations Proceedings: Trends in Materials R&D for Sensor Manufacturing Technologies/, Edited by I.E. Anderson, N.R. Moody, J.W. Sears, D.F. Bahr, H.L. Fraser, and J.E. Smugeresky/, /TMS (The Minerals, Metals & Materials Society) Annual Meeting, pp. 39-48 (2006)/

65. J. E. Jackson, Y.D. Park, A.N. Lasseigne, C. Sangphagdee, D.L. Olson, B. Mishra, and V. Kaydanov,
"Characterization of Engineering Materials Utilizing Thermoelectric Power Measurements", Materials in Clean Power Systems: Applications, Corrosion, and Protection, Edited by Z.G. Yang, K.S. Weil, and
M.P. Brady, TMS (The Minerals, Metals & Materials Society) Annual Meeting, pp. 1-10 (2006).

66. A. N. Lasseigne, M. A. Inam, V. Kaydanov, B. Mishra, and D. L. Olson, "Chatacterization of Hydrogenization Behavior of NaAl H4 Utilizing Thermoelectric Poser and Magnetic Analyses", advanced Materials for Energy Cponversion IIIm pp199-206, TMS, Warrendale, PA (2006).

67. A. N. Lasseigne, M. A. Inam, Y. D. Park, V. I. Kaydanov, B. Mishra, and D. L. Olosn, " Characterization of Hydrogen Storage Capabilities of the Two-Phase Region of LaNi5", Advanced Materials for Energy Conversion III, pp.127-136, TMS, Warrendale, PA (2006).

68. A. N. Lasseigne -Jackson, B. Mishra, D. L. Olson and J. E. Jackson, "Reversible Hydrogen Storage
Battery Materials: Non-Destructive Sensor Development", Proc. of NHA Annual Hydrogen Conference
2007, Paper #3535, San Antonio, TX., March 18-22 (2007).

69. A.N. Lasseigne-Jackson, J.E. Jackson, D.L. Olson, B. Mishra, "Non-Destructive Hydrogen Storage Material Fuel Gauge and Diagnostic Tool", Proceedings of 2007 Commercial Vehicle Engineering Congress and Exhibition, Paper 2007-01-4272, pps 6,SAE International.

70. C. Sangphagdee, A.N. Lasseigne-Jackson, J.E. Jackson, D.L. Olson, and B. Mishra, ""Use of Torsional Fatigue to Produce Simulated Radation Damage of Stainless Steel Assessed with TEP Measurements", to be published in
.
71. A.N. Lasseigne-Jackson, B. Mishra, D.L. Olson, and J.E. Jackson, "Reversible Hydrogen Storage Battery Materials: Non-Destructive Sensor Development", for publication in the proceedings of the National Hydrogen Association, San Antonio, TX, March 19-22, 2007.

72. A. N. Lasseigne-Jackson, B. Mishra, and D. L. Olson. "Characterization of
Hydrogen Storage Capabilities in Advanced Battery Materials" Materials and Manufacturing Processes, vol. 22, pp. 433-439 (2007).

73. J.E. Jackson, A.N. Lasseigne-Jackson, F.J. Sanchez, D.L. Olson, and B. Mishra, "Inspection-Related Magnetization Effect on Corrosion in Linepipe Steel: Thermodynamic and Kinetic Interpretations", Proceedings of the American Society for Non-Destructive Testing Fall 2006 Conference, October 23-27 (2006).

74. J.E. Jackson, D.L. Olson, A.N. Lasseigne-Jackson, B. Mishra , and T.A. Siewert, "Correlating the Influence of Magnetic Field on Solute Content in Metals Using the Thermodynamic Auxiliary Work Functions", Properties and Processes for a Hydrogen-based Economy, Sixteenth Symposium on Thermophysical Properties, July 30 - August 4, 2006, Boulder, Colorado, U.S.A.

75. J.E. Jackson, A.N. Lasseigne-Jackson, F.J. Sanchez, D.L. Olson, and B. Mishra, "The Influence of Magnetization on Corrosion in Pipeline Steels", Proceedings of the 6th International Pipeline Conference, September 25-29, 2006, Calgary, Alberta, Canada (2006).

76. A.N. Lasseigne-Jackson, J. Anton, J.E. Jackson, D.L. Olson, and B. Mishra, "Development of Electromagnetic Techniques for Hydrogen Content Assessment in Coated Linepipe", Rev. QNDE 2006, pp. 1159-116, American Institute of Physics, Melville, N. Y. (2007).

77. J.E. Jackson, D.L. Olson, A.N. Lasseigne-Jackson, B. Mishra , and T.A. Siewert, "Using the Thermodynamic Auxiliary Work Functions to Correlate the Magnetic Field Influence on Solute Content in Metals", to be published in the International Journal of Thermophysics (2007).

78. J.E. Jackson, A.N. Lasseigne-Jackson, F.J. Sanchez, D.L. Olson, and B. Mishra, "Inspection-Related Magnetization Effect on Corrosion in Linepipe Steel: Thermodynamic and Kinetic Interpretations", Proceedings of the American Society for Non-Destructive Testing Fall 2006 Conference, October 23-27 (2006).

79. J.E. Jackson, D.L. Olson, A.N. Lasseigne-Jackson, B. Mishra , and T.A. Siewert, "Correlating the Influence of Magnetic Field on Solute Content in Metals Using the Thermodynamic Auxiliary Work Functions", Properties and Processes for a Hydrogen-based Economy, Sixteenth Symposium on Thermophysical Properties, July 30 - August 4, 2006, Boulder, Colorado, U.S.A.

80. J.E. Jackson, A.N. Lasseigne-Jackson, F.J. Sanchez, D.L. Olson, and B. Mishra, "The Influence of Magnetization on Corrosion in Pipeline Steels", Proceedings of the 6th International Pipeline Conference, September 25-29, 2006, Calgary, Alberta, Canada (2006).

81. A.N. Lasseigne-Jackson, J. Anton, J.E. Jackson, D.L. Olson, and B. Mishra, "Development of Electromagnetic Techniques for Hydrogen Content Assessment in Coated Linepipe Steel", in Proc. QNDE Conf. 2006, Portland, OR, American Institute of Physics, Melville, N. Y. (2006).

82. J.E. Jackson, D.L. Olson, A.N. Lasseigne-Jackson, B. Mishra , and T.A. Siewert, "Using the Thermodynamic Auxiliary Work Functions to Correlate the Magnetic Field Influence on Solute Content in Metals", to be published in the International Journal of Thermophysics (2007).

83. J.E. Jackson, D.L. Olson, B. Mishra, and A.N. Lasseigne, "Deposition of Al-Si Metallic Coating Precursors on Mo-Si-B Turbine Materials", TMS 2006 Annual Meeting, MPMD 7th Global Innovations Proceedings: Trends in Materials R&D for Sensor Manufacturing Technologies, Edited by I.E. Anderson, N.R. Moody, J.W. Sears, D.F. Bahr, H.L. Fraser, and J.E. Smugeresky, TMS (The Minerals, Metals & Materials Society) Annual Meeting, pp. 39-48 (2006).

84. J.E. Jackson, D.L. Olson, B. Mishra, and A.N. Lasseigne-Jackson, "Development of Advanced Thermal Barrier Coatings for Mo-Si-B materials", for publication in the proceedings of TMS 2007 Conference, Orlando, FL, February 27-March 1, 2007.

85. J.E. Jackson, D.L. Olson, B. Mishra, and A.N. Lasseigne-Jackson, "Deposition and Characterization of Al-Si Metallic TBC Precursor on Mo-Si-B Turbine
Materials", International Journal of Hydrogen Energy, Vol. 32,pp. 3789-3796 November (2007).

86. J.E. Jackson, A.N. Lasseigne-Jackson, T. Koenig, D.L. Olson, and B. Mishra, "Development of Graded-Architecture Mullite Thermal Barrier Coating on Mo-Si-B Turbine Materials", to be presented at ASME Turbo Expo 2007 November, ASME GT2007-29740 (2007).

87. J.E. Jackson, Y.D. Park, A.N. Lasseigne, C. Sangphagdee, D.L. Olson, B. Mishra, and V. Kaydanov, "Characterization of Engineering Materials Utilizing Thermoelectric Power Measurements", Materials in Clean Power Systems: Applications, Corrosion, and Protection, Edited by Z.G. Yang, K.S. Weil, and M.P. Brady, TMS (The Minerals, Metals & Materials Society) Annual Meeting, pp. 1-10 (2006).

88. A.N. Lasseigne Jackson, A. Zamarron, I. Ashraf, B. Mishra, and D. L. Olson, "Thermoelectric Power Hydrogen Sensors for Reversible Hydrogen Storage Materials", PRICM 6, Materials Science Forum, Vols. 561-565 (2007), pp. 1633-1636.

89. J. E. Jackson, D. L. Olson, S. Liu, R. Hellner, A. N. Lasseigne-Jackson and C. Trickell," Calibration of Electronic Property Measurements with Larson- Miller Parameter for Service Life assessment", Proc. Boiler Tube and HRSG Tube Failure and Inspection Conference, Oct. 2007, Calgary, Alberta , Canada.

90. S. Kundu, S. Chatterjee, B. Mishra and David Olson, " Interface Microstructure and Strength Properties of the Diffusion Joints of Titanium-Cu Interlayer- Stainless Steel", Met. Trans. A, ( 2008).

91. D. L. Olson, V. I Kaydanov, Alex Landau, Malki Pinkas, and A. N. Lasseigne- Jackson, "Application of Interdisciplinary Fundamentals to Achieve New Insight into Materials Properties, Stability and Integrity, Proc. QNDE 2007, Golden Colorado (2007).

92. J. E. Jackson, B. Mishra and D. L. Olson, "The Future of Microstructural Characterization: Ana Electron Metallography Laboratory", Proc. QNDE 2007, Golden Colorado (2007).

93. A. L. Lasseigne-Jackson, J. M Anton and T. A. Siewert, D. L. Olson, B. Mishra and J. E. Jackson, " Advanced Nondestructive Measurement Schemes to Actively Monitor Hydrogen Content in Steel Pipeline", Proc. QNDE 2007, Golden Colorado (2007).

94. D. E. Dooley, D. l. Olson, and F. E. Gibbs, Monitoring Homogenization of Cerium-Lathanium Alloys Using Thermoelectric Power and Electrical Resistivity, Proc. QNDE 2007, Golden Colorado (2007).

95. A. Landau, M. Pinkas, A. N. Lasseigne-Jackson, and D. Olson, "Developing a Monitoring Tool to Assess the Fatigue Damage in Ni-Based Superalloys Using Thermoelectric Power Measurements", Proc. QNDE 2007, Golden Colorado (2007).

96. S. Niyomosoan, P. Termsuksawad, R. Goldfarb, D. L. Olson, B. Mishra, Hydrogenization of Intermetallic Compounds Characterized by Magnetic Susceptibility and Thermoelectric Power Measurement, in CP975, Review of Quantitative Nondestructive Evolution, Vol. 27, pp. 1109-1116, American Institute of Physics, ed. D.O. Thompson and D. E. Chimenti, (2008),

97. Y. D. Park, Y. D. Kim , and D. L. Olson, "Study on In-Situ Diffusion Hydrogen Sensor for Welded HSLA Steel", Proc. QNDE 2007, Golden Colorado (2007).

98. D. L. Olson, " Non-Destructive Physical Property Measurement to Establish Materials State Awareness", Proc. of National Academies Workshop on Materials State Awareness", Sept. .25-26, 2007, Woods Hole, Mass., pp 1-10, National Materials Advisory Board, Washington, D.C.

 


Publications: Reactive Metals and Corrosion

1. D. L. Olson, J. L. Blough, and D. A. Rigney, "Electro Transport in Liquid NaK", Scripta Met. 4, 1023 1032 (1970).

2. T. S. Lakshmanan, D. L. Olson, and D. A. Rigney, "Electrotransport in Liquid Na Rb Alloys", Scripta Met. 5, 1099 1104 (1971).

3. D. L. Olson, J. L. Blough, and D. A. Rigney, "Electrotransport in Monovalent Liquid Alloys", Acta Met. 20, 305 312 (1972).

4. D. L. Olson and J. L. Blough, "Volume Thermal Expansion Coefficients for Liquid Na K Alloys", Nuclear Technology 13, 301 302 (1972).

5. J. L. Blough, D. L. Olson, and D. A.. Rigney, "Composition of Electrotransport Reversals in Certain Liquid Alloys", J. Appl. Phys. 43, 2476 2477 (1972).

6. D. L. Olson and D. A. Rigney, "Proposed Ultraviolet Band Filters", Rev. Sci. Instru. 43, 2476 1248 (1972).

7. J. L. Blough, D.L. Olson, and D. A.. Rigney, "Electrotransport in Liquid Na K Alloys", Mat. Sci. and Eng. 11, 73 76 (1973).

8. D. L. Olson, and J. L. Blough, T. S. Lakshmanan, and D. A.. Rigney, "Computer Simulation of Chemical Profiles During Electrotransport", Comp. Physics Comm. 5, 430 436 (1973).

9. T. S. Lakshmanan, D. L. Olson, and D.A.. Rigney, "Electrotransport of Liquid Alloys", Trans. Indian Institute of Metals 27 (3), 120 124 (1974).

l0. G. A.. Minick and D. L. Olson, "The Effects of Columbium in Inhibiting Intergranular Corrosion of Stainless Steel Castings", Materials and Corrosion Protection (NACE) 14, 41 43 (1975).

11. R.A. Patterson , R. J. Schlager, and D. L. Olson, "Liquid Lithium Penetration and Corrosion Kinetics of Stainless Steel 304L", Nuclear Materials 27, 312 (1975).

12. R. J. Schlager, D. L. Olson, and W. L. Bradley, "Analytical Determination of Nitride Nitrogen in Lithium Coolants", Nuclear Technology 27 (3), 439 441 (1975).

13. R. J. Schlager, R. A. Patterson, D. L. Olson, and W. L. Bradley, "Stainless Steel Weight Loss in Nitrogen Contaminated Liquid Lithium", Nuclear Technology 29 (1), 94-97 (1976).

l4. W. Jordan, W. L. Bradley, and D. L. Olson, "Liquid Lithium Penetration of Stressed Armco Iron", Nuclear Technology 29 (2), 209-214 (1976).

15. J. A. Reeves, Jr., D. L. Olson, and W. L. Bradley, "Grain Boundary Penetration Kinetics of Nitrided 304L Stainless Steel", Nuclear Technology 30 (3), 385 389 (1976).

16. B. Craig and D. L. Olson, "Corrosion at a Holiday in an Organic Coated Metal Substrate System", Corrosion 32 (8), 316 321 (1976).

17. D. L. Olson and W. L. Bradley, "The Corrosion of Ferrous Alloys in Nitrogen Contaminated Liquid Lithium", Proceedings of the International Conference on "Liquid Metal Technology in Energy Production", ERDA Conference Report No. 760503 P1, 446 (1976).

18. L. B. Whitefield, D. L. Olson, and W. L. Bradley, "Grain Boundary Grooving of Pure Iron in Nitrogen Contaminated Liquid Lithium", Nuclear Science and Engineering 62, 157 162 (1977).

19. T. A.. Whipple, D. L. Olson, W. A.. Bradley, and D.K. Matlock, "Mechanical Behavior of Iron in Lithium", Nuclear Tech. 39 (1), 75 83 (1978).

20. D. L. Olson and D. K. Matlock, "The Essential Physical and Chemical Properties of Ferrous Alloys Needed for Containment of Liquid Lithium", Energy Journal 3, 315 323 (1978).

21. W. A. Averill and D. L. Olson, "Review of the Extractive Metallurgy of Lithium from Brines and Ores", Energy Journal 3, 305 313 (1978).

22. D. A. Bates, G. R. Edwards, and D. L. Olson, "An Evaluation of Engineering Alloys for High Temperature Lithium Containment", Materials Performance 19 (3), 40 48 (1980).

23. J. Selle and D. L. Olson, "Liquid Lithium Compatibility Research Status and Requirements for Ferrous Alloys, published in NACE book Materials Considerations in Liquid Metal Systems in Power Generation, 15 22 (1978).

24. D. L. Olson, G. N. Reser, and D. K. Matlock, "Liquid Lithium Corrosion Rate Expressions for 304L Stainless Steel", Corrosion 36 (3), 140 144 (1980).

25. D. L. Hammon, S. K. DeWeese, D. K. Matlock, and D. L. Olson, "Evaluation of Mechanical Properties of Materials in Liquid Lithium", Closed Loop 9, 3 11 (1979).

26. R. Spencer, S. K. DeWeese, D. K. Matlock, and D. L. Olson, "Fatigue Crack Propagation Characteristics of 2 1/4 Cr 1 Mo Steel in Liquid Lithium at 773K", Met. Trans. 11A (10), 1759 61 (1980).

27. D. K. Matlock, R. E. Spencer, D. L. Hammon, T. A.. Whipple, and D. L. Olson, "Interrelationship Between Corrosion and Deformation Processes of Materials in Liquid Lithium", Proceedings of Second International Conference on "Liquid Metal Technology in Energy Production", April 14 2, 1980, Richland, Washington, Section 22, 32 39 (1980).

28. T. R. Pinchback, J. R. Winkel, D. K. Matlock, and D. L. Olson, "Corrosion of Structural Alloys in Liquid Rubidium", Nuclear Technology, 54 (2), 201 207 (1981).

29. W. A. Averill, D. L. Olson, D. K. Matlock, and G. R. Edwards, "Lithium Reactivity and Containment", Conf. Book on "Aluminum Lithium Alloys", Stone Mountain, Georgia, (May 1980), AIME Publication, pp. 8 28 Warrendale, PA, (1981).

30. P. A. Steinmeyer, D. L. Williamson, D. L. Olson, and D. K. Matlock, "A Mossbauer and Weight Loss Study of a Lithium Corroded Austenitic Stainless Steel", J. Mat. Energy Systems, 2 (3), 34 36 (1981).

31. D. L. Hammon, D. K. Matlock, and D. L. Olson, "The Effect of Liquid Lithium on Fatigue Crack Propagation in Type 304L Stainless Steel at Elevated Temperatures", J. Mat. Energy Systems, 2 (3), 26 33 (1981).

32. D. L. Hammon, C. J. Coubrough, D. K. Matlock, and D. L. Olson, "The Influence of Cyclic Loading on the Lithium Corrosion Behavior of Reactor Materials", Proceedings of "Second Topical Meeting on Fusion Reactor Materials", Seattle, Washington, (August 9 12, 1981), J. Nucl. Mats. 104, 663 668 (1981).

33. P.A. Steinmeyer, D. L. Olson, and D. K. Matlock, "The Nature of the Ferrite Layer on Lithium Corroded Type 304L Austenitic Stainless Steel", J. Mat. Energy Systems 4 (2), pp. 84 91 (1982).

34. R. E. Spencer, D. K. Matlock, and D. L. Olson, "The Effects of Liquid Metal Embrittlement on High Temperature Fatigue of 2 1 1/4 Cr 1 Mo Steel in Liquid Lithium", J. Mat. Energy Systems 4 (4), 187 194 (1983).

35. D. K. Matlock, G. R. Edwards, and D. L. Olson, "Evaluation of the Fatigue Resistance in Lithium at 270 C of Seamless Type 321 Stainless Steel Bellows", Hanford Engineering Development Laboratory, HEDL TME 82 42; UC 20, Section 4, Richland, Washington (September 1981).

36. D. K. Matlock, G. R. Edwards, and D. L. Olson, "Fatigue Crack Propagation Characteristics of Stainless Steel in Liquid Lithium in the Development Laboratory Report HEDL TME 82 42; UC 20, Section 3, Richland, Washington (September 1981).

37. P.A. Steinmeyer, D. L. Olson, D. K. Matlock, and G. R. Edwards, "Review of Corrosion Phenomena in Molten Lithium", International Journal of Review on Coatings and Corrosion, 4, (4), pp. 349 434 (1981).

38. D. L. Hammon, D. K. Matlock, and D. L. Olson, "Embrittlement of Engineering Materials During High Temperature Fatigue in Liquid Lithium Environment", Conference Proceedings: Embrittlement by Liquid and Solid Metals, AIME Warrendale, PA, pp. 549 562 (1984).

39. G.A. Minick and D. L. Olson, "Corrosion in the Mineral Industry", ASM Handbook 13, 1294 1298, ASM, Materials Park, Ohio (1987).

40. B. Mishra, P. D. Ferro, D. L. Olson, J. J. Moore, and W. A. Averill, "Electrowinning of Calcium for In-Situ Direct Reduction of Metal Oxides", Extended Abstracts of Electrochemical Society, vol. 91-2, Abstract 195, pp. 284-287, Pheonix, Arizona (October 1991).

41. B. Mishra, D. L. Olson, J. J. Moore, and W. A. Averill, "Production of Oxygen by Electro-Reduction of Lunar Ores", Vol. 1, pp. 666-677, Proc. Conf. Space 92, Amer. Soc. of Civil Eng., N.Y., N.Y. (1992).

42. B. Mishra, D. L. Olson, S. Al-Hassan, and M. Salama, "Physical Characteristics of Iron Carbonate Scale Formation in Linepipe Steels", Corrosion 92, pp. 13/1-13/11, Nashville, TN, April, Houston, TX (1992).

43. P. Ferro, W. A. Averill, B. Mishra, D. L. Olson, and J.J. Moore, "Recovery of Calcium from the Effluent of Direct Oxide Reduction Process", "Processing of Residues and Effluents: Processing and Environmental Considerations", pp. 539-550, TMS Annual Meeting, San Diego, CA, TMS-AIME, Warrendale, PA, (1992).

44. A. Raraz, B. Mishra, D. L. Olson, J. J. Moore, and W.A. Averill, "Optimization of Process Efficiency in Cerium Electrorefining", Rare Earths: Resources, Science, Technology, and Application, Proc. of Annual Meeting, TMS-AIME, San Diego, CA, Warrendale, PA, pp. 337-350, (1992).

45. S. Pritchett, B. Mishra, J. J. Moore, D. L. Olson, and A. M. Murray, "Combustion Synthesis of Calcium and Lithium Gallides", Light Metals 1992, Annual TMS Meeting, pp. 1287-1294, San Diego, CA, Warrendale, PA (1992).

46. D. L. Olson, B. Mishra, and W. A. Averill, "Application of Molten Salts in Pyrochemical Processing of Reactive Metals", Proc. of 8th Intl. Symp. on Molten Salts, vol. 92-16, pp. 184-203, Electrochemical Society, St. Louis, MI, May 17-22 (1992).

47. B. Mishra, D. L. Olson, and W. A. Averill, "Processing of Effluent Salt from the Direct Oxide Reduction Process", Intl. Symp. on Waste Processing and Recycling in Mining and Metallurgical Industries, 31st Annual Conference of Metallurgists, Edmonton, Canada, pp. 279-291, August (1992).

48. B. Mishra, S. J. Al-Hassan, and D. L. Olson, "A Predictive Model for Corrosion of Linepipe Steels in CO2-Brine Solution", Proc. 3rd National Congress on Corrosion, Bombay, December 10-11 (1992).

49. B. Mishra, S. Al-Hassan, D. L. Olson, and M. M. Salama, "Prediction of Microstructural Effects on Corrosion Linepipe Steels in CO2-Brine Solution", Corrosion 93, NACE Annual Conference, pp. 90/1-90/13, New Orleans, LA, April (1993).

50. A. Wahid, D. L. Olson, D. K. Matlock, and C. E. Cross, "Corrosion of Weldments", ASM Handbook, 10th Edition, Vol. 6, pp. 1065-1069, ASM, Materials Park, OH (l993).

51. P. D. Ferro, B. Mishra, D. L. Olson, and W.A. Averill, "Process Optimization for Electrowinning of Calcium", Light Metals 1993, pp. 1129-1136, TMS-AIME, Warrendale, PA (1993).

52. B. Mishra, D. L. Olson, and W.A. Averill, "Applications of Molten Salts in Reactive Metals Processing", Proc. Intl. Conf. on Emerging Technologies for Metals and Fuels, pp. 317-328, Engineering Foundation, N.Y., N.Y., March 12-18 AIME-TMS, Warrendale, PA (1993); I.E.T., vol. 93 (3), pp. 66 (May-June 1993); RFP-4651; NTIS; GPO Dept. Order Number DE93003368.

53. D. L. Olson, "ERC Materials Lead Industry", Envirosciences, (12), pp. 22 (1992).

54. J. J. Moore and D. L. Olson, Design Education in Metallurgy and Materials Engineering, edited by M. E. Schesinger and D. E. Mikkola, "Undergraduate Materials Design at Colorado School of Mines", TMS-AIME, Denver, CO, February (1993), pp. 181-189, TMS Publ., Warrendale, PA (1993).

55. B. Mishra and D. L. Olson, "Synthesis of Al-Cu-Be Alloy by Molten Salt Electrolysis", TMS Fall Meeting, 1993, Pittsburgh, PA, Processing and Fabrication of Advanced Materials III, pp. 239-256, TMS, Warrendale, PA (1994).

56. S. Govindarajan, K. Monroe, J. J. Moore, B. Mishra, D. L. Olson, and J. Disam, "The Application of Combustion Synthesis in the Production of MoSi2 and of MoSi2, Proceedings, TMS (1993), Processing and Fabrication of Advanced Materials III, pp. 161-180, TMS, Warrendale, PA (1994).

57. B. Mishra, D. L. Olson, and M. M. Salama, "Prediction of Microstructural Effects on Corrosion of Linepipe Steels in C02-Brine Solution, Oil and Gas Symposium, Proc. 12th Intl. Congress on Metallic Corrosion, vol. 4, pp. 2840-2853, NACE, Houston, TX (1993).

58. S. Al-Hassan, B. Mishra, and D. L. Olson, "Prediction of Microstructural Effect on Corrosion of Linepipe Steels in CO2-Brine Solution", Corrosion 93, pp. 90/1-90/13, NACE, Houston, TX (1993).

59. B. Mishra, D. L. Olson, and W. A. Averill, "Electrolytic Recovery of Calcium from Molten Ca0-CaCl2 Salt-Mix", Proc. Intl. Sympo. on Environmental Aspects of Electrochemistry and Photoelectrochemistry, Ed. M. Tomiewicz et al., Electrochemical Society, pp. 191-202, Pennington, NJ (1993)

60. D. L. Olson and B. Mishra, "Electrolytic Extraction of Beryllium, Mineral Processing and Extractive Metallurgy Review, 13, pp. 127-143 (1994).

61. R. G. Wendt, W. C. Moshier, B. Shaw, P. Miller, and D. L. Olson, "Corrosion Resistant Aluminum Matrix for Graphite-Aluminum Composites", Corrosion 50 (11), pp. 819-836, (1994).

62. S. Govindarajan, J.J. Moore, B. Mishra, and D. L. Olson, "Development of High Temperature Oxidation Resistant Coating System for Molybdenum", in Elevated Temperature Coatings: Science and Technology I, pp. 291-302, Eds. N.B. Nahotre, J.M. Hampikian, and J.J. Stiglich, Presdient at TMS Fall Meeting, Rosemont Illinois, October, 1994.

63. S. Al-Hassan, B. Mishra, D. L. Olson, and M. M. Salama, "Effect of Heat Treatment on the Corrosion Resistance of Linepipe Steels in CO2 Atmosphere", Corrosion in Pipeline System, Proceedings of 2nd NACE ASIAN Conf., vol. 1, pp. 1061-1 to 1061-14, Singapore, September 26-30, 1994, NACE Publ., Houston, TX (1994).

64. B. Mishra, D. L. Olson, and P. D. Ferro, "Application of Ceramic Membranes in Molten Salt Processing of Radioactive Wastes", Int. Symposium on Actinides Processing: Methods and Materials, 1994, TMS Annual Meeting, San Francisco, CA, February 27-March 3, 1994, pp. 233-248, TMS-AIME, Warrendale, PA (1994).

65. B. Mishra, P. D. Ferro, and D. L. Olson, "Diffusion Coefficient of Oxygen in Molten Calcium Chloride", Proceedings of 9th Int. Symposium on Molten Salts, Ed. C.L. Hussey et al., 185th Annual Electrochem. Soc., pp. 697-704, San Francisco, CA, May 22-26, 1994, Electrochem. Soc., Pennington, N.J. (1994).

66. B. Mishra, D. L. Olson, and W. A. Averill, Pyrochemical Treatment of Radioactively Contaminated Waste Salts", Proc. of Intl. Symp. on Resource Conservation and Environmental Technologies in Metallurgical Industries, Ed. P. Mahant, C. Pickles, and W.K. Lu, pp. 143-156, Canadian Inst. of Metals, Montreal, Quebec (1994).

67. S. Govindarajan, K. Monroe, J. J. Moore, B. Mishra, and D. L. Olson, "Combustion Synthesis of MoSi2 and MoSi2 Composites", Proc. of Symp. on High Temperature Silicides and Refractory Alloys", ed. by C.I. Briant et al., MRS Publication, vol. 322, Boston, MA, pp. 113-118 (1993).

68. B. Mishra, D. L. Olson, and J. J. Moore, "Pyrochemical Processing of Waste Salt", 2nd Intl. Symp. on Metallurgical Processes for the Early 21 Century, vol. 1, Basic Principles, H.Y. Sohn, editor, pp. 563-582, 1994 TMS Publication, Warrendale, PA.

69. B. Mishra, D. L. Olson, and J. J. Moore, "Molten Salt Processing of Radioactive Waste", Proc. Symposium on "New Remediation Technology in the Changing Environemtal Arena", Chapter 26, pp. 185-190, Annual SME Meeting, Denver, CO, March (1995).

70. P. D. Ferro, B. Mishra, D. L. Olson, and W. A. Averill, "Application of Ceramic Membrane in Molten Salt Electrolysis of Ca0-CaCl2", J. of Waste Management vol. 7, (7), pp. 451-461, (1997).

71. B. Mishra, D.L. Olson, and J. J. Moore, "Remediation of Radioactive Contaminated Salt Waste by Pyrometallurgical Processing", Pyrometallurgy 95, Ed. by A.E. Wraith, pp. 23-34, Inst. Mining & Metallurgy, Cambridge, U.K. (1995).

72. S. Govindarajan, K. Monroe, J. J. Moore, B. Mishra, and D. L. Olson, "Oxidation Resistant Coatings for High Temperature Application of Molybdenum", Proc. of Forum on New Materials, Florence, Italy, June 29-July 4 (1994), Advances in Inorganic Films and Coatings, Advances in Science & Technology, vol. 5, Ed. by P. Vincenzini, pp. 345-352, Techna SRL, Florence, Italy (1995).

73. B. Mishra, W. A. Averill, and D. L. Olson, "Role of Chromium in Oxygen Sparging of Contaminated Molten Salts", 9th Intl. Symposium on Molten Salts, Ed. C. L. Hussey et al., 185 Electrochem. Soc., pp. 689-696, Pennington, N.J. (1994).

74. B. Mishra, A. Raraz, D. L. Olson, and W. A. Averill, "Optimization of Plutonium Electrorefining Through Modeling and Model Materials", Trace and Reactive Metals: Processing and Technology, pp. 153-171, (1995); also in Light Metals 1995, pp. 1321-1329, TMS, Warrendale, PA (1995).

75. C. Lensing, D.L. Olson, B. Mishra, and J. E. Selle, "Evaluation of Erbia as Molten Plutonium Containment Material", Light Metals 1996, pp. 1203-1209, TMS, Warrendale, PA (1996).

76. B. Mishra, A. G. Raraz, D. L. Olson, and W. A. Averill, "Formation of Explosive Compounds in Acid-Contaminated Leaded Rubber Gloves, Part I: Theoretical Analysis", J. of Hazardous Materials, 56, pp. 107-116 (1997).

77. B. Mishra, A. G. Raraz, D. L. Olson, and W. A. Averill, "Formation of Explosive Compounds in Acid Contaminated Leaded Rubber Gloves, Part II: Experimental Verification" J. of Hazardous Materials, 57, pp. 13-28 (1998).

78. B. Mishra, S. Al-Hassan, D. L. Olson, and M. M. Salama, "Development of a Predictive Model for Corrosion of Steel in CO2 Containing Solutions", Corrosion 53 (11), pp. 852-859 (1997).

79. C. Lensing, D. L. Olson, and B. Mishra, "Kinetics of Erbium Oxide Corrosion in Molten Cericum", Light Metals 1997, pp. 1179-86, TMS, Warrendale, PA (1997).

80. P. D. Ferro, B. Mishra, D. L. Olson, and W.A. Averill, "Electrolytic Extraction of Calcium from Calcium Oxide", Golden Jubilee Issue, Trans. Indian Institute of Metals, vol. 51 (1), pp. 69-77 (1998).

81. D. L. Olson and B. Mishra, "Review of Liquid Lithium Corrosion of Ferrous Containment Materials", Light Metals 1998, pp. 1303-1308, TMS, Warrendale, PA (1998).

82. S. Al-Hassan, B. Mishra, D. L. Olson, and M. M. Salama, "Effect of Microstructure on Corrosion of Steels in Aqueous Solutions Containing Carbon Dioxide", Corrosion, vol. 54 (6), pp. 480-491 (1998).

83. B. Mishra, D. L. Olson, and C. S. Eberle, "Corrosion of Non-Ferrous Materials in Liquid Lithium and Lithium Chloride", Light Metals 1998, pp. 1349-1358, TMS, Warrendale, PA (1998).

84. B. Mishra, D. L. Olson, and C. Lensing, "The Influence of Weld Microstructural Features on Corrosion Behavior", Proc. of the 3rd Pacific Rim Conf. on Adv. Mat. and Proc. (PRICM), pp. 2303-2309, July, 1998, Honolulu, Hawaii, TMS, Warrendale, PA (1998).

85. B. Mishra, D. L. Olson, and A. Raraz, "Modeling Studies in Molten Salt Electrorefining of Plutonium", Proc. 1999 TMS Annual Meeting, San Diego, CA, March 1-4 (1999).

86. B. Mishra and D.L. Olson, "Review of Beryllium Metallurgy", Proc. Symp. on Review of Extraction, Processes and Applications of Reactive Metals, 1999 TMS Annual Meeting, San Diego, CA, March 1-4 (1999), submitted to Metallurgy of Reactive Metals (2000).

87. B. Mishra and D. L. Olson, "Corrosion of Refractory Alloys in Molten Lithium and Lithium Chloride",
Min. Proc. Ext. Met. Rev., vol. 22, pp. 369-388 (2001). F. E. Gibbs, C. J. Freiboth, J. D. Olivas, D. L. Olson, and T. G. Zocco, "Mold Design Parameters for Cast Alpha-Phase Plutonium", to be submitted to Defense Research Review (2000).

88. F. E. Gibbs, D. L. Olson, and W. Hutchinson, "Identification of a Homogenization Surrogate for the Plutonium 1 wt. pct. Gallium Alloy: Part I, to be submitted to Met. and Mat. Trans. (2000).

89. F. E. Gibbs, D. L. Olson, and W. Hutchinson, "Determination of the Activation Energy for Diffusion in a Cerium-5 wt. pct. Lanthanum Alloy: Part II, to be submitted to Met. and Mat. Trans. (2000).

90. F. E. Gibbs, D. L. Olson, and W. Hutchinson, "Determination of the Activation Energy for Diffusion in a Cerium-5 wt. pct. Lanthanum Alloy: Part II, to be submitted to Met. and Mat. Trans. (2000).

91. R. J. Erfurdt, D. L. Olson, and F. E. Gibbs, "An Investigation of the Effect of Iron Content on the Homogenization Response of Plutonium-1 wt. pct. Gallium Alloy", to be submitted (2000).

92. F. E. Gibbs, W. H. Hutchinson, and D. L. Olson, "Identification of a Physical Metallurgy Surrogate for the Plutonium-1 wt. pct. Gallium Alloy", Conf. Proc. on Plutonium Futures - The Science, Topical Conference on Plutonium and Actinides, American Institute of Physics, AIP Conf., Proc. #532, Santa Fe, NM, pp. 109-101, July 10-13 (2000).

93. D. E. Dooley, D. L. Olson, and G. R. Edwards, "Prediction of Plutonium Alloy Phase Stability Using Electronic Properties", Conf. Proc. on Plutonium Futures - The Science, Topical Conference on Plutonium and Actinides, American Institute of Physics, AIP Conf. Proc. #532, Santa Fe, NM, pp. 424-425, July 10-13 (2000), AIP, Melville, NY (2000).

94. D. L. Olson, M. Marya, D. W. Wenman, J. D. Olivas, and D. Eliezer, "The Use of Alloying Theory to Enhance the Properties of Magnesium", Proc. of THERMEC '2000, Proceeding of the International Conference on Processing and Manufacturing of Advanced Materials, Las Vegas, NV, Dec 2000: CDROM Section A1, vol. 117/3, Special Issue : J. of Mat. Proc. Techn. , 6 pages, Elsevier Science, UK (October 2001).

95. D. L. Olson, D. W. Wenman, V. I. Kaydanov, C. Suryanarayana and D. Eliezer, "The Search for Room Temperature Cubic Magnesium Alloys", Proc. of Magnesium 2000, 2nd Israeli Int. Conf., pp. 165-172, February 22-24, 2000, Dead Sea, Israel, Magnesium Research Institute, Ltd., Posash House, Beer Sheva, Israel (2000).

96. D. Dooley, B. Martinez, D. Olson, D. Olivas, R. Rouquille, and T. Rising, "Diffusion of Helium in Plutonium Alloys", Plutonium Futures - Sciences, Topical Conference of Plutonium and Actinides, American Institute of Physics, AIP Conf. Proc. #532, Santa Fe, NM, pp. 428-430, July 10-13 (2000), AIP, Melville, NY (2000).

97. D. E. Dooley, D. L. Olson, G. R. Edwards, and F. E. Gibbs, "Development of an Electronic Phase Diagram and the Predictions of Plutonium Alloy Phase Stability Using Electronic Properties", J. Phys. Condens. Matter, 13, pp. 8677-8696 (2001).

98. B. Mishra and D. L. Olson, "Production of Reactive Metals by Molten Salt Processing", Proc. of the 201 Electrochemical Society Meeting, Philadelphia, PA., 12 pages, May 12-17, (2002).

99. D.L. Olson, Warren I. Finch and B. Mishra, Critical Review of the new Book entitled "Uranium Resource Processing: Secondary Resources", by C.K. Gupta and H. Singh which was published by Elsevere Publishing. the Critical Review was published in the American Association of Petroleum Geologists Bulletin, vol. 88 (8), pp 1208-11, February (2004).

100. Ge Wang, Sittha Saidaraasamoot, David L. Olson, Brajendra Mishra, John S. Spencer, and Swieng Thuanboon, Tanker Corrosion", in Handbook of Environmental Degradation of Materials, edit. By Myer Kutz, pp. 523-545. William Andrew Publishing, NY (2005).

101. Y. D. Park, D. L. Olson, A. Landau and M. Pinkas, "Assessment of Hydrogen Cracking in UNS N05500 Using TEP and XRD Analysis", Corrosion 2004., paper 04265, pp 1-7, (2004).

102. B. Mishra and D. L. Olson, "Molten Salt Applications in Materials Processing", J. Physics and Chemistry of Solids, Vol. 66, (2-4) February-April, pp 396-401 (2005).

103. F. J. Sanchez, B Mishra and D. L. Olson, "Magnetization Effect on Hydrogen Absorption in High-strength Steels and its Implications", Scripta Materialia, vol. 53, (12) pp 1443-1448 (2005).

104. D. L. Olson and B. Mishra, Re port on Findings on MMS Offshore Coating Workshop", in Advanced Coating R & D for Pipelines and Related Facilities, pp. 16-28, NIST Special Publication 1044, NIST, Gaithersburg, MD, (2005).

105. Sweing Thuanboon, David S. Tordonato, William Navidi, David L. Olson, Brajendra Mishra and Ge Wang, " A Statistical Analysis of Corrosion Wastage or Transverse Members in Single Hull Tankers", Proc. Of OMAE 2006, @5th Intl.. Conf.. on Offshore Mechanics and Arctic Engineering, 4-9, June 2006, Hamburg Germany, Paper OMAE2006-92665, pp. 1-7, June (2006).

106. Y.D. Park, D.L. Olson, A. Landau, and M. Pinkas, " Assessment of Hydrogen-Induced Precipitation in a Nickel-Copper Alloy using Thermoelectric Power", Corrosion Vol. 62,(5) , p. 395-402 (2006).

107. J. E. Jackson, A. N. Lasseigne-Jackson, F. J. Sanchez, D. L. Olson and B. Mishra, " The Influence of Magnetization on Corrosion in Pipeline Steels", Paper #IPC2006-10615, Proc. of IPC 2006, 6th International Pipeline Conference, pp., Calgary, Alberta, Canada, Sept. 25-29, 2006, ASME, NY, NY (2006).

108. J. E. Jackson, D. L. Olson, A. N. Lasseigne-Jackson, B. Mishra and T. A. Siewert, " Correlating the Influence of Magnetic Field on Solute Content in Metals Using the Thermodynamic Auxiliary Work Functions", Proc. of the 16th Symposium on Thermophysical Properties, pp. 1-9, July 30-August 4, 2006, Boulder Colorado (2006).

109. J. Sanchez, B. Mishra and D. L. Olson, "An Assessment of Magnetization Effect pm hydrogen Induced
Cracking for Thick Walled Pipelines and Its Implications", Script Mat. (2008).

110. D. P. Johnson, R. K. Schulze, R. J. Hanrahan, D. L. Olson and B. Mishra, "Early Stage Actinide Oxide
Development: Kinetics Expressions and Mechanism", Plutonium Futures, (2008).

 

Publications: Welding and Joining

1. D. L. Olson and K. M. Koliwad, "Large Silicon Slice Mounting", IEEE Transactions on Parts, Hybrids, and Packaging PHP 7, 76 80 (1971).

2. D. L. Olson, "Strike the Arc", Mines Magazine 63, 6 10 (1973).

3. A. L. Liby and D. L. Olson, "Metallurgy of Electroslag Welding: The State of the Art", Colorado School of Mines Quarterly 69 (1) 41 73 (1974).

4. K. P. Ferrera and D. L. Olson, "Mn0 Si02 Ca0 Welding Flux System", Welding Journal 54 (7), 211s 215s (1975).

5. M. O'Brien, C. R. Rice, and D. L. Olson, "High Strength Diffusion Welding of Silver Coated Base Metals", Welding Journal 55 (1), 25 27 (1976).

6. V. K. Grotzky, C. R. Rice, J. H. Doyle, and D. L. Olson, "The Nature of Mercury Activated Silver Solid State Bonds", Rockwell International, Rocky Flats Report RFP 2514 pp. 13, (November 19, 1976).

7. A. M. Davila, D. L. Olson, and T. A. Freese, "Submerged Arc Welding of Ductile Iron", AFS Trans. 85, 79 86 (1977).

8. A. M. Davila and D. L. Olson, "The Development of Austenitic Filler Materials for Welding Ductile Iron", Proc. Inter. Conf., "Trends in Steel and Consumables for Welding", London, 493 508 (1978).

9. D. D. Schwemmer, H. E. Janzen, and D. L. Olson, "The Role of Specific Ionic Additions on the Behavior of Manganese Silicate Welding Fluxes," Proceedings Inter. Conf., "Trends in Steels and Consumables for Welding", Welding Institute, London, 265 280 (1978).

10. J. W. Elmer, P.A. Steinmeyer, and D. L. Olson, Final Report, "Microstructure of Specific Stainless Steel Weldments Being Evaluated for Cryogenic Science", National Bureau of Standards Report NBSIR 79 1609, 353 400 (June 1979).

11. J. R. Roper and D. L. Olson, "The Influence of Capillarity on the Welding of 21 6 9 Stainless Steel", Welding Journal 57, 103S 107S (1978).

12. D. D. Schwemmer, D. L. Olson, and D. Williamson, "The Relationship of Welds Penetration to the Welding Flux", Welding Journal 58 (5), 153s 160s (1979).

13. D. L. Olson and A. L. Liby, "Diffusion Bonding", Beryllium Science and Tech., 2, Chapter 14, 275 295, Plenum Press, New York, NY, (1979).

14. D. L. Olson, D. D. Schwemmer, and D. L. Williamson, "Discussion on the Relationship of Weld Penetration to the Welding Flux", Welding Journal 59 (1), 31S 36S (1980).

15. A. M. Davila and D. L. Olson, "Welding Consumable Research for Ductile Iron", Metal Casting, 70, (11), 70 73 (1980).

16. J. E. Jones, D. L. Olson, and G. P. Martins, "Metallurgical and Thermal Aspects of Non Vertical Electroslag Welding", Welding Journal 59 (9), 245S 252S (1980).

17. T. L. Reinhart, E. Carmona, and D. L. Olson, "The Influence of Ionic Character on Welding Flux Behavior", Intern. Conf. Book on Welding Research in the 1980's B, 107 112, JWRI, Osaka, Japan (October 1980).

18. D.L. Olson and A. L. Liby, "Joining III: Diffusion Bonding", New Silver Technology, The Silver Institute, Washington, D.C., (July 1981).

19. A. L. Liby, G. P. Martins, and D. L. Olson, "Simulation of Unsteady State Heat Flow in Vertical Electroslag Welding", published in AIME Conf. Book on "Heat Flow in Castings and Weldments, Engineering Foundation Conference on "Modeling of Casting and Welding Processes", Franklin Pierce College, Rindge, New Hampshire (August 3 8, 1980), pp. 162 195, TMS, Warrendale, PA (1981).

20. D. L. Olson and J. E. Indacochea, "The Physical and Chemical Behavior of Submerged Arc Welding Fluxes", Proceedings of Australia New Zealand Welding Convention, 307 321, 12 16, October (1981), Christchurch, New Zealand.

21. K. Olsen, D. L. Olson, and N. Christensen, "Weld Bead Tempering of the Heat Affected Zone", Scandinavian Journal of Metallurgy 11, 163 168 (1982).

22. J. W. Elmer, D. L. Olson, and D. K. Matlock, "Thermal Expansion Characteristics of Austenitic Stainless Steel Filler Metals", Welding Journal 61 (9), 293S 301S (1982).

23. G. M. Campbell, J. W. Elmer, W. S. Gibbs, D. K. Matlock, and D. L.Olson, "Evaluation of Factors Controlling High Temperature Service Life of 2 1/4 Cr 1 Mo Steel to Austenitic Stainless Steel Weldments", Conference Proceedings, ASM Conference "Trends in Welding Research in the United States", New Orleans, La., pp. 443 470, Materials Park, Ohio, Nov. (1981).

24. S. Liu, K.C., C. B. Dallam, and D. L. Olson, "Performance of the CaF2 Ca0 Si02 System as a Submerged Arc Welding Flux for a Niobium Based HSLA Steel", Conference Proceedings, International Conference on "Welding Technology for Energy Applications", CONF 820544, pp. 445 466, Gatlinburg, Tennessee, May 16 19 (1982).

25. D. K. Matlock, G. R. Edwards, D. L. Olson, and S. Ibarra, "An Evaluation of the Fatigue Behavior in Surface, Habitat, and Underwater Wet Welds" Conference Proceedings "Second International Conference on Offshore Welded Structures", London, England, PP. P15 1 to P15 10, November 16 18, (1982); also in IIW Proceeding Underwater Welding Conference, Chapter III, paper 9, page 303, Pergamon Press, Oxford (Conf. 27 28 June 1983, Trondheim, Norway) 1983.

26. D. D. Schwemmer and D. L.Olson, Technical Note: "A Novel Way to Cut Chromium Containing Alloys" Welding Design and Fabrication 55 (10), pg. 26, (1982).

27. C. E. Cross and D. L. Olson, "Modification of Eutectic Fusion Zone Microstructure", Welding Journal 61 (12), pp. 381s 387s, (1982).

28. S. J. Mathews, J. K. King, D. G. Howden, and D. L. Olson, "Dissimilar Metals Welding", AWS Handbook 4, Seventh Edition, Chapter 12, pp. 513 547, (1982).

29. G. R. Edwards, D.L. Olson, and D.K. Matlock, "Titanium Welding Metallurgy: Cracking Susceptibility", Proceedings of Ti 6211 Basic Research Program, ONR Report: DTNSRDC SME CR 15 82, pp. 345 362, July (1982).

30. M. S. Misra, D. L. Olson, and G. R. Edwards, "The Influence of Process Parameters and Specific Additions on Epitaxial Growth in Multiple Pass Ti 6Al 4V Welds", AIME Proceedings on the Symposium "Grain Refinement in Castings and Welds", St. Louis (Oct. 25 26, 1982) pp. 259 274, AIME, Warrendale, PA, (1983).

31. R. K. Okagawa, R. D. Dixon, and D. L. Olson, "The Influence of Nitrogen from Welding on Stainless Steel Weld Metal Microstructure", Welding Journal 62 (8), 204s 209s, (1983).

32. C. E. Cross, A. Salvetat, J. F. Capes, D. L. Olson, and D. K. Matlock, "Morphology of Al Cu Eutectic Fusion Zone Microstructure", IMS ASM International Metallographic Exhibit (1982), (Class 2 3rd place Award); Metallography 16, 112, Feb. (1983).

33. D. L. Olson, R. L. Hellner, L. E. Myers, R. J. Dybas, L. E. Shoemaker, and T. A. Siewert, "Arc Welding of Cast Iron", ASM Handbook on Welding, V. 6, 9th Edition, pp. 307 319, Materials Park, OH (1983).

34. D. L. Olson, R. L. Hellner, T. H. North, J. E. Sims, R. S. Sabo, E. Chaney, S. Liu, C. B. Dallam, and J. E. Jones, "Submerged Arc Welding", ASM Handbook on Welding, Vol. 6, 9th Edition, pp. 114 152 (1983).

35. C. R. Rice, T. F Diderickson, J. E. Snead, and D. L. Olson," Welding Metallurgy Considerations Involving the Welding of Steel Armor Plate onto SSR Cars at Rocky Flats", Rockwell International, Rocky Flats Report RFP 3507, January 17 (1984).

36. R. H. Frost, D. L. Olson, and G.R. Edwards, "The Influence of Electrochemical Reactions on the Chemistry of the Electroslag Welding Process", 1983 Engineering Foundations Conference Proceedings, "Modeling of Castings and Welding Processes II, pp. 279 294, AIME, Warrendale, PA, (1983).

37. J. E. Indacochea and D. L. Olson, "Relationship of Weld Metal Microstructure and Penetration to Weld Metal Oxygen Content", J. Mat. Energy Systems, 5 (12), 139 148 (1983).

38. C. E. Cross, D. L. Olson, G. R. Edwards and J. F. Capes, "Weldability of Aluminum Lithium Alloys", Conference Proceeding on "Aluminum Lithium Alloy II", at Monterey, California, April 12 14, 1983, edited by T.H. Sanders, Jr., and E.A. Starke, Jr., AIME Publication, Warrendale, PA, pp. 675 682 (1984).

39. D. L. Olson, "Welding Research in U.S. Universities and its Relationship to Government and Industrial Funding", to be presented and published IIW Conf. Proc. for Int. Congress on Welding Research, Boston, pp. 144 151, July (1984).

40. J. A. Self, D. L. Olson, and G. R. Edwards", Stability of Austenitic Weld Metal", the Proceedings of the International Cryogenic Materials Conference (ICMC), Kiev, USSR (June 24 26, 1984), pp. 185 188 (in Russian), (1986); Conf. Book "Cryogenic Properties of Metals", pp. 181 189, (in English), NBS Publication, Boulder, Colorado (1987).

41. J. A. Self, D. K. Matlock and D. L. Olson, "An Evaluation of Austenitic Fe Mn Ni Weld Metal for Dissimilar Metal Welding", Welding Journal 63, 282s 288s (1984).

42. J. E. Indacochea, M. Blander, N. Christensen, and D. L. Olson, "Chemical Reactions with Fe0 Mn0 Si02 Fluxes", Met. Trans. 16B, 237 245 (1985).

43. M. Blander, and D.L. Olson, "Thermodynamic and Kinetic Factors in the Pyrochemistry of Submerged Arc Flux Welding of Iron Based Alloys", AIME Conf. Proc. of the Second International Symposium on Slags and Fluxes, Lake Tahoe, Reno, Nevada, November 11 14 (1984), pp. 271 277, AIME Warrendale, PA (1984).

44. R. David Thomas and D. L. Olson, Supplement to "Welding Research in the Western Hemisphere", American Welding Technology Application Center, IIW Doc. No. VII 29 84, September (1984).

45. C. B. Dallam, S. Liu, and D. L. Olson, "Flux Composition Dependence of Microstructure and Toughness of Submerged Arc HSLA Weldments", Welding Journal 64 (5), 140s 151s (1985).

46. W. S. Gibbs, S.H. Wang, D. K. Matlock and D. L. Olson, "High Temperature Impression Creep Testing of Weldments", Welding Journal, 64 (6), 152s 158s (1985).

47. D. L. Olson, "Prediction of Austenitic Weld Metal Microstructure and Properties", Adams Lecture AWS Meeting, Dallas, TX, April (1984), Welding Journal 64, 281s 295s (1985).

48. J. A. Self, S. A. Abdulgader, and D. L. Olson, "The Fe Ni Mn Cu C Filler Metal System for Welding Ductile Cast Iron", Welding Journal 64 (11), 322s 326s, (1985).

49. J. E. Jones and D. L. Olson, "Selecting Arc Welding Processes", Chemical Engineering 93, Part 1: (5), pp. 117 121 (March 3, 1986), and Part 2: (6) pp. 131 134 (March 31, 1986).

50. O. Grong, D. L. Olson and N. Christensen, "Carbon Oxidation in Hyperbaric MMA Welding", Metal Construction 17, pp. 810R 814R, (Dec. 1985).

51. C. A. Natalie, D. L. Olson and M. Blander, "Behavior of Welding Fluxes", Annual Review of Materials Science 16, 389 413 (1986).

52. P. Dunn, C.A. Natalie and D. L. Olson", Sol Gel Fluxes for Flux Cored Arc Welding Consumables", Conf. Book: Welding Research The State of the Art", ASM International, Materials Park, Ohio, pp. 171 186, (1986).

53. T. Diebold, G. R. Edwards, and D. L. Olson, "Discussion of Fundamental Aspects of Formation and Stability of Explosive Welds", Met. Trans. 17A, 374, (1986).

54. S. Liu and D. L. Olson, "The Role of Inclusions in Controlling HSLA Steel Weld Metal Microstructures", Welding Journal 65(6), 139s 149s (1986).

55. R. H. Frost, J. E. Jones and D. L. Olson, "Electroslag Welding of Pressure Vessel Steels", ONR Conf. Book, U.S. Naval Academy, Division of Engineering and Weapons, Report EW 20 85, "Electroslag Processing for Marine Applications", Annapolis, MD, 4 5 March (1985).

56. D. K. Matlock, G. R. Edwards D. L. Olson, S. Ibarra, "Effect of Seawater on the Fatigue Crack Propagation Characteristics of Welds for Offshore Structures", Conf. Book on "Fatigue, Corrosion Cracking, Fracture Mechanisms and Failure Analysis", Salt Lake, UT, Dec. 2 6, (1985), pp. 113 122, ASM, Metals Park, Ohio (1986).

57. C. E. Cross, J. F. Capes, and D. L. Olson, "Characterization of Binary Aluminum Alloy Weld Metal Microstructures", Microstructural Science 14, "Welding Failure Analysis and Metallography", pp. 3 16, ASM, Materials Park, OH (1987).

58. B. F. Carpenter, D. K. Matlock, and D. L. Olson, "Microstructural Characterization of Aluminum Passivated Stainless Steel Weldments", Microstructural Science 14, "Welding, Failure Analysis and Metallography", pp. 137 158, ASM, Materials Park, OH (1987).

59. D. L. Olson and S. Ibarra, "Underwater Welding Metallurgy, Proceedings ASME, "First OMAE Specialty Symposium on Offshore and Arctic Frontiers", ASME, New York, N.Y., pp 439 447, (1986).

60. J. A. Self, B.F. Carpenter, D. L. Olson and D. K. Matlock, "Phase Transformations and Alloy Stability in Fe Mn Ni Cr Al Weld Metal", Conf. Proc. "Alternate Alloying for Environmental Resistance", pp. 37 45, TMS-AIME, Warrenville, PA (1987).

61. S. Liu, D. K. Matlock and D. L. Olson, "A Thermodynamic and Kinetics Approach in the Development of Expressions for Alloy Behavior Prediction", J. Heat Treating 4 (4), pp. 309 316 (1986).

62. O. Grong, T. A. Siewert, G. P. Martins and D. L. Olson, "A Model for the Silicon Manganese Deoxidation of Steel Weld Metals", Met. Trans. 17A (10), 1797 1807 (1986).

63. D. Hayduk, B. K. Damkroger, G. R. Edwards and D. L. Olson, "Cracking Susceptibility of Ti 6Al 2Nb 1Ta 0.8Mo as Determined by the Varestraint Test", Welding Journal 65, 251s 260s (1986).

64. M. Blander and D. L. Olson, "Electrochemical Effects on Weld Pool Chemistry in Submerged Arc and D.C. Electroslag Welding", Proc. Int. Conf. on "Trends in Welding Research", Gatlinburg, TN, May 19 22 (1986), pp. 363 366, ASM, Materials Park, Ohio (1986).

65. R. A. Nichting, G. R. Edwards, D. L. Olson and B. B. Rath, "Theories of Low Temperature Solid State Bonding", Proc. Int. Conf. on Trends in Welding Research, Gatlinburg, TN, May 19 22 (1986), pp. 733 738, ASM, Materials Park, Ohio (1986).

66. C. E. Cross and D. L. Olson, "Hot Tearing Model to Assess Aluminum Weldability", Proc. Int. Conf. on "Aluminum Alloys: Physical and Mechanical Properties", Univ. of Virginia, Charlotteville, VA, July 15 20, (1986), vol. III, pp. 1869 1875 (1986).

67. C. E. Cross and D. L. Olson, "Weld Metal Solidification and Hot Tearing of Aluminum Alloys", Solidification Seminar, Centennial Technical Symposia, ALCOA Laboratories, p. 46, August 24 28 (1986).

68. P. S. Dunn, C. A. Natalie and D. L. Olson, "Sol Gel Fluxes for Flux Cored Welding Consumables", J. Mat. Energy Systems 8 (2), 176 184 (1986).

69. D. L. Olson and T. A. Siewert, "The International Research Supplement", Welding Journal 65 (10), 8 (1986).

70. A. C. Hunt, G. R. Edwards and D .L. Olson, "Developments in Controlling Phase Transformations in Microalloyed Steel Weld Metal", Proc. Int. Weld Conf. 2, pp. 1183 1199, January 12 14, 1987, New Delhi, India, Welding Research Institute, Tiruchivapalli, 620 014, India (1987).

71. S. Ibarra, C. E. Grubbs, and D. L. Olson, "The Nature of Metallurgical Reactions in Underwater Welding", 1987 Offshore Technology Conference, OTC Report 5388, pp. 277 282, (April 27, 1987).


72. D. K. Matlock, G. R. Edwards, D. L. Olson and S. Ibarra, "Effect of Sea Water on the Fatigue Crack Propagation Characteristics of Welds for Offshore Structures", J. Mat. Energy Systems 9, pp. 25 34, (1987).

73. M. C. Nordin, G. R. Edwards and D. L. Olson, "The Influence of Yttrium Microadditions on Titanium Weld Metal Cracking Susceptibility and Grain Morphology", Welding Journal 66 (11), 342s 351s, (1987).

74. J. H. Kim, R. H. Frost, D. L. Olson and M. Blander, "Electrochemical Reactions at the Electrode in Submerged Arc Welding", Proc. of "Joint International Symposium on Molten Salts", Honolulu, Hawaii, editors G. Mamantov et al, vol. 87 7, pp. 928 938, Electrochemical Society Inc., Pennington, N.J. (October 18 23, 1987).

75. S. Liu and D. L. Olson, "The Influence of Inclusion Chemical Composition on Weld Metal Microstructure", J. Mat. Eng. 9, 237 251 (1987).

76. C. E. Cross, G. R. Edwards, D. L. Olson and R.H. Frost, "Intrinsic Nucleation of Weld Metal Grains", Conf. Proceedings on Solidification Processes, pp. 388 391, Sheffield, U.K., September (1987), The Institute of Metals, London (1988).

77. C. E. Cross and D. L. Olson, "Compositional Factors Affecting Weldability of Extruded Aluminum Alloys", Conf. Proc. "4th Int. Alum. Extrusion Tech. Seminar", 2, pp. 391 393, Chicago, April 11 14 (1988).

78. He Yunija, R. H. Frost, G. R. Edwards and D. L. Olson, "Influence of Grain Refinement on the Weldability of Aluminum Alloys", Welding Journal 68 (7), 280s 289s (1989).

79. S. Ibarra, C. E. Grubbs, and D. L. Olson, "Metallurgical Aspects of Underwater Welding", J. Metals 40 (12), 8 10 (1988).

80. R. E. Francis, J.E. Jones and D. L. Olson, "Effect of Shield Gas Oxygen Activity on GMA Microalloyed HSLA Steel Weld Metal Microstructure", Welding Journal, 69 (11), 408s-415s (1990).

81. P.T. Oldland, C.W. Ramsay, D. K. Matlock, and D. L. Olson, "Significant Features of High Strength Steel Weld Metal Microstructures", Welding Journal 68 (4), 158s 168s (1989), addition 68 (6), pp. 252s (1989).

82. M.J. Dvornak, R.H. Frost, and D. L. Olson, "The Weldability and Grain Refinement of Al 2.2 Li 2.7 Cu Alloy", Welding Journal 68 (8), 327s 335s (1989).

83. I. D. Choi, D. K. Matlock, and D. L. Olson, "The Influence of Composition Gradient on Tensile Properties of Weld Metal", Scripta Met. 22, 1563 1568 (1988).

84. T. A. Siewert, C. N. McCowan, and D. L. Olson, "Ferrite Number Prediction to 100 FN in Stainless Steel Weld Metal", Welding Journal 67 (12), 289s 298s (1988).

85. C. N. McCowan, T. A. Siewert and D. L. Olson, "Stainless Steel Weld Metal: Prediction of Ferrite Content", Welding Research Council Bulletin, #342 (April 1989).

86. C. D. Dallam and D. L. Olson, "Stress and Grain Size on Weld Metal Ferrite Formation", Welding Journal 68 (5), 198s 205s (1989).

87. C. A. Natalie, D. L. Olson, and M. Blander, "Weld Pool Pyrometallurgy", Materials Processing Theory and Practice 8 (Welding Theory and Practice), Chap. 5, pp. 149 174, North Holland Physics, Elsevier Science Publisher, NY, NY (1989).

88. S. Ibarra, D. L. Olson, and C. E. Grubbs, "Underwater Wet Welding of Higher Strength Offshore Steels", OTC Paper #5889, 21st Annual OTC, Houston, TX, May 1 4, pp. 67 76, (1989).

89. J. H. Kim, R. H. Frost, D. L. Olson, and M. Blander, "Effect of Electrochemical Reactions on Submerged Arc Weld Metal Compositions", Welding Journal 69 (12), 446s-453s (1990).

90. R. Trevisan, D. D. Schwemmer, and D. L. Olson, "The Fundamentals of Weld Metal Pore Formation", Materials Processing Theory and Practice 8 (Welding Theory and Practice), Chap. 3, pp. 79 116, North Holland Physics, Elsevier Science Publishers, NY, NY (1989).

91. D. D. Kautz, D. L. Olson, P. Burgardt, and G. R. Edwards, "A Characterization of Pulsed Electron Beam Welding Parameters", Welding Journal, 70 (4), 100s-105s (1991).

92. D. E. Bunnell D. L. Olson, and S. Liu, "Moisture Determination of SMAW Electrode Coverings Using Electrical Capacitance", J. Mat. Engr., 12 (2), 159 165 (1990).

93. C. W. Ramsay, D. L. Olson, and D. K. Matlock, "The Influence of Inclusions on the Microstructures and Properties of a High Strength Steel Weld Metal", Proc. Gatlinburg International Conference on "Recent Trends in Welding Research", May 14 18, 1989, pp. 763 768, Metals Park, Ohio (1990).

94. D. L. Olson, "The Fundamentals of Welding Consumables", Proc. Gatlinburg International Conference on "Recent Trends in Welding Research", May 14 18, 1989, pp. 553 562, ASM, Materials Park, Ohio (1990).

95. N. H. Nicholas, R. A. Nichting, G.R. Edwards, and D.L. Olson, "The Influence of Surface Topography on Low Temperature Solid State Bonding", Proc. Gatlinburg International Conference on "Recent Trends in Welding Research", May 14 18, 1989, pp. 547 550, ASM Metals Park, Ohio (1990).

96. I. D. Choi, D.K. Matlock, and D. L. Olson, "Influence of Composition Gradients on Weld Metal Creep Behavior: An Analysis Based on Laminate Composites", Proc. Gatlinburg International Conference on "Recent Trends in Welding Research", May 14 18, 1989, pp. 787 792, ASM, Metals Park, Ohio, (1990).

97. S. K. Marya and D. L. Olson, "Effect of Minor Elements and Process Parameters on GTA Weld Bead Variances in Steels", Revue de Me'tallurgie, Memoires et Etudes Scientifiques, vol. 86 (1), pp. 25 34 (1989).

98. P.A. Burke, J. E. Indacochea, and D. L. Olson, "The Effects of Welding Flux Additions on 4340 Steel Weld Metal Composition", Welding Journal 69 (3), 115s 122s (1990).

99. S. Liu and D. L. Olson, "A New Approach to Welding Engineer Education", Welding Journal, 69 (3), 38 40 (1990).

100. I. D. Choi, D. K. Matlock, and D. L. Olson, "An Analysis of Diffusion Porosity in Copper Nickel Composite", Mat. Sci. and Eng. A124, 1L5 1L8 (1990).

101. I. D. Choi, D. K. Matlock, and D. L. Olson, "Creep Behavior of Nickel Copper Laminate Composites with Controlled Composition Gradients", Met. Trans. 21A (9), 2513 2520 (1990).

102. I. D. Choi, D. K. Matlock, and D. L. Olson, "Communication: Creep Behavior of Nickel Copper Solid Solution Alloys Below 0.55 Tm", Met. Trans. 21A (9), 2601 2604 (1990).

103. AWS Roundtable Discussion, Transcribed Quotes (included D.L. Olson), "Needed Directions in Welding Research", by A. Cullison, H. Woodward, and B. Newton Montiel, Welding Journal 68 (5), 27 41 (1989).

104. D. W. Oh, D. L. Olson and R. H. Frost, "The Influence of Boron and Titanium on Low Carbon Microalloyed Steel Weld Metals", Welding Journal 69 (4), 151s 158s (1990).

105. S. Ibarra, D. L. Olson, and S. Liu, "Functional Forms of Equations to Predict Steel Weld Metal Properties", Proc. OMAE Conf., V.III Part B, 517 523, Houston, ASME, February (1990).

106. M. A. Lisin, I. D. Choi, D. K. Matlock, and D. L. Olson, "A Composite Modeling Analysis of Impression Creep Testing on Heterogeneous Materials", Welding Journal 69 (4), 159s 165s (1990).

107. S. Liu, D. L. Olson, G. P. Martins, and G. R. Edwards, "Modeling of Brazing Processes That Use Coatings and Interlayers", Welding Journal, 70 (8) 207s-215s (1991).

108. D. L. Olson and D. K. Matlock, "Compositional Gradient Effects on Weldment Properties", Proc. ASM "Weldability of Materials Symposium", Detroit, Michigan, October 6 12, pp. 49 56, ASM, Materials Park, OH, (1990).

109. M. S. Dvornak, R. H. Frost, and D. L. Olson, "Effects of Grain Refinement on Aluminum Weldability", Proc. ASM "Weldability of Materials Symposium", Detroit, Michigan, October 6 12, pp. 289 296, ASM, Materials Park, OH, (1990).

110. D. L. Olson, S. Liu, and G. R. Edwards, "Role of Solidification on HSLA Steel Weld Metal Chemistry", Proc. ASM "Weldability of Materials Symposium", Detroit, Michigan, October 6 12, pp. 183 190, ASM, Materials Park, OH, (1990).

111. D. L. Olson and T. A. Siewert, "Present Consumable Technology Advances into the 21st Century", Welding Journal, 69 (11), 37-40 (1990).

112. D.W. Oh, D. L. Olson, and R. H. Frost, "B Plus Ti Makes Welds that Are Strong, Tough", Welding Design and Fabrication, 63 (11), 16 (1990).

113. R.A. Nichting, D. L. Olson, and G. R. Edwards, "Low Temperature Solid State Bonding of Copper", J. Mat. Eng. and Performance, 1 (1), pp. 35-44 (1992).

114. G. L. Berry, D. L. Olson, and D. K. Matlock, "Influence of Microcompositional Gradients on Stress Corrosion Cracking Propagation", Mat. Sci. and Engr. A148, pp. 1-6 (1991).

115. B. F. Carpenter, D. L. Olson, D. K. Matlock, and M. J. Cieslak, "Phase Stability of Fe Al Cr Ni Weld Metal", Mat. Sci. and Engr. A147, pp. 1-8 (1991).

116. S. Ibarra, D. L. Olson, and S. Liu, "Effect of Water Depth on Underwater Weld Metal Porosity Formation", Proc. of Intn. Conf. on Underwater Welding, pp. 54-69, New Orleans, LA, March 20-21, AWS, Miami, Florida, (1991).

117. S. Liu, S. Ibarra, and D. L. Olson, "Flux Formulation for Wet Underwater Welding Electrodes", Proc. of Intn. Conf. of Underwater Welding, pp. 98-119, New Orleans, LA, March 20-21, AWS, Miami, FL (1991).

118. D. L. Olson, S. Ibarra, and S. Liu, "Selection of Resilient Welding Parameters for Arctic Fabrication and Repair", Proc. 10th Intn. Conf. OMAE, Stavanger, Norway, III-A, 125-130, ASME, N.Y., N.Y. (1991).

119. D. W. Oh, D. L. Olson, and R. H. Frost, "Nucleation Mechanisms of Acicular Ferrite in Low-Carbon Steel Weld Metal", Proc. Symp. Welding and Joining Processes, ASME Publication, PED, vol. 51, pp. 49-61, Atlanta, GA, December 1-6 (1991), ASME, N.Y., N.Y., Book No. H00684 (1991).

120. A. Wahid, D. L. Olson, D.K. Matlock, and T.J. Kelly, "Role of Compositional Gradients in Environmentally Promoted Weld Cracking", Proc. of ASM "Heat Resistant Materials Conference", pp. 447-452, ASM, Materials Park, OH (1991).

121. S. Ibarra, D. L. Olson, and S. Liu, "Fundamental Prediction of Steel Weld Metal Properties", Trans. ASME - J. of Offshore Mechanics and Arctic Engineering, 113 (11), pp. 327-333 (1991).

122. P. R. Chidambaram, G. R. Edwards, and D. L. Olson, "Fundamental Aspects of Metal-Quartz Joining", Proc. Int. Symp. on "Joining of Materials for 2000 A.D., SOJOM-91, pp. 331-338, December 12-14, 1991, Tiruchirapilli, India, Indian Institute of Welding (1991).

123. M. S. Dvornak, R. H. Frost, and D. L. Olson, "Influence of Solidification Kinetics on Aluminum Weld Grain Refinement", Welding Journal 70 (10), 271s-276s (1991).

124. S. Ibarra, D. L. Olson, and S. Liu, "Methods for Prediction of Weld Properties", Welding Design and Fabrication, 64 (8), p. 16 (1991).

125. D.L. Olson and D.K. Matlock, "Weld Metal Phase Stability", Proc. AIME-TMS Symp. on The Metal Science of Joining, pp. 135-139, TMS-AIME, October 20-24, Cincinnati, OH (1991), Warrendale, PA (1992).

126. P.R. Chidambaram, G.R. Edwards, and D.L. Olson, "Wetting of Ceramic by Molten Metals: Rate Controlling Phenomena", Proc. AIME-TMS Symp. on The Metal Science of Joining, pp. 67-71, TMS-AIME, October 20-24, Cincinnati, OH (1991), Warrendale, PA (1992).

127. D.L. Olson and C.E. Cross, "Wear in the Mining Industry", ASM Metals Handbook, pp. 649-655, ASM, Materials Park, OH (1992).

128. P.R. Chidambaram, G.R. Edwards, and D.L. Olson, "A Thermodynamic Criterion to Predict Wettability at Metal-Alumina Interfaces", Met. Trans. 23B, pp. 215-222 (1992).

129. M. Holt, D. L. Olson, and C. E. Cross, "Interfacial Tension Driven Fluid Flow Model for Hot Cracking", Scripta Met. et Mat., 26 (7), pp. 1119-1124 (1992).

130. D. L. Olson, S. Liu, and G. R. Edwards, "Physical Metallurgical Concerns in the Modeling of Weld Metal Transformations", "Mathematical Modeling of Welding Phenomena", edited by H. Cerjak and K.E. Easterling, pp. 89-108, Institute of Materials, London, U.K. pp. 89-108 (1993).

131. S. Ibarra and D. L. Olson, "Wet Underwater Steel Welding", Ferrous Alloy Weldments, Key Eng. Mats. Vol. 69-70, pp. 329-378, Trans. Tech. Publ., Zurich, Switzerland (1992).

132. D. L. Olson, G. R. Edwards, and S. K. Marya, "The Physical and Chemical Behavior Associated with Slag Detachability during Welding", Ferrous Alloy Weldments, Key Eng. Mats. Vol. 67-70, pp. 253-268, Trans. Tech. Publ., Zurich, Switzerland (1992).

133. T. A. Siewert, C. N. McCowan, and D. L. Olson, "Ferrite Number Prediction for Stainless Steel Welds", Ferrous Alloy Weldments, Key Eng. Mats. Vol. 67-70, pp. 149-166, Trans. Tech. Publ., Zurich, Switzerland (1992).

134. P. R. Chidambaram, A. Meier, G. R. Edwards, and D. L. Olson, "Wetting and Spreading at Alumina-Copper Alloy Systems", Proc. 3rd Intn. Conference on Trends in Welding Research", June 1-5, 1992, Gatlinburg, TN, pp. 1107-1111, ASM, Materials Park, OH (1993).

135. K. S. Bang, S. Liu, and D. L. Olson, "Modeling of Reactive Layers Growth in Reactive Metal Brazing", Proc. 3rd Intn. Conference on Trends in Welding Research, June 1-5, 1992, Gatlinburg, TN, ASM, pp. 1129-1134, Materials Park, OH (1993).

136. S. H. Wang, D. K. Matlock, and D. L. Olson, "Physical Simulation for the Creep Behavior of Solidified Weld Metal", Proc. 3rd Intn. Conference on Trends in Welding Research, June 1-5, 1992, pp. 605-609, Gatlinburg, TN, ASM, Materials Park, OH (1993).

137. R. H. Frost, S. Liu, and D. L. Olson, "Pyrochemical Evaluation of Weld Metal Inclusion Evolution", Proc. 3rd Intn. Conference on Trends in Welding Research, June 1-5, 1992, Gatlinburg, TN, pp. 205-209, ASM, Materials Park, OH (1993).

138. E. I. Kivineva, D. L. Olson, and D.K. Matlock, "Particulate Metal Matrix Composite as a Weld Deposit", Welding Journal, 74 (3), pp. 83s-92s (1995).

139. K. S. Bang, S. Liu, and D. L. Olson, "Interfacial Reaction Between Alumina and Cu-Ti Filler Metal During Reactive Metal Brazing", Welding Journal, 73 (3), pp. 54s-60s (1994).

140. S. H. Wang, D. K. Matlock, and D. L. Olson, "High Temperature Deformation and Fracture Behavior of Laminate Composite: The Importance of Interdiffusion During Creep", Scripta Met. and Mat., 27, pp. 35-40 (1992).

141. D. L. Olson, G .R. Edwards, S. Liu, and D. K. Matlock, "Non-Equilibrium Behavior of Weld Metal in Flux-Related Processes", IIW Document IX-1685-92, pp. 1-49, American Council, AWS, Miami, FL (1992), Welding in the World, 31 (2), (March/April) pp. 142-154 (1993).

142. A. O. Kluken, S. Ibarra, S. Liu, and D. L. Olson, "Use of Predictive Equations for Arctic Steel Heat Affected Zone Properties", Offshore Mechanics and Arctic Energy (Proceeding of 11th Intern. Conf.) OMAE III, Part A-Materials Engineering, pp. 1-8, ASME (1992).

143. S.K. Marya, D.L. Olson, and G.R. Edwards, "Scope of Predictive Equations in Welding Metallurgy of Steels", to be published in Proc. of JOM-6, Sixth International Conf. on the Joining of Materials, April 5-7, 1993, pp. 258-265, Helsingor, Denmark (1993), also published in Int. J. for the Joining of Materials, vol. 6 (2X), pp. 73-78 (1994).

144. S.H. Wang, D.K. Matlock, and D.L. Olson, "An Analysis of the Critical Conditions for Diffusion Induced Void Formation in Laminate Composite", Mat. Sci. and Eng., A167, pp. 139-145 (1993).

145. C.E. Grubbs, A.E. Bettelmann, S. Ibarra, S. Liu, D.J. Marshall, and D.L. Olson, "Underwater Welding and Cutting", AWS Handbook, 8th Edition, 3, Part 1, Chapter 10, pp. 445-500, AWS, Miami, FL (1996).

146. D.L. Olson, S. Liu, S. Ibarra, and O. Runnerstam, "Oxygen As A Welding Parameter: The Role of Light Metallography", Microstructural Science 20, pp. 31-44, (1993).

147. A.O. Kluken, S. Ibarra, S. Liu, and D.L. Olson, "Aptness of Predictive Equations for Arctic Steel Heat Affected Zone Properties", Proc. of 12th Intn. Conf. of OMAE, vol. 3, Part A, pp. 35-40, Glasgow, Scotland, June, ASME, N.Y., N.Y. (1993).

l48. D.W. Oh, D.L. Olson, and R.H. Frost, "The Influence of Zirconium and Boron on Low Carbon Steel Weld Metal Microstructure", J. Eng. for Industry, 116 (1), pp. 26-31 (1994).

149. A Sanchez-Osio, S. Liu, D.L. Olson, and S. Ibarra, "Underwater Wet Welding Consumables for Offshore Applications", Proc. of 12th Intn. Conf. of OMAE 1993, Vol. 3, Part A, pp. 119-128, Paper #OMAE 93-848, Glasgow, Scotland, June 20-24, ASME, N.Y., N.Y. (1993).

150. F.C. Liao, S. Liu, and D.L. Olson, "Weldability of Nitrogen-Enhanced HSLA Steels", Proc. of 12th Intn. Conf. of OMAE 1993, vol. 3, Part A, pp. 231-244, Glasgow, Scotland, ASME, N.Y., N.Y. June 20-24 (1993).

151. D.L. Olson, G.R. Edwards, and B. Mishra, "The Chemical Constitution of Welding Consumables", Proc. Int. Conf. of Health and Safety in Welding and Related Processes, South African Institute of Welding, Pretoria, South Africa, vol. 2, paper #1, pp. 1-10 (1993).

152. PR. Chidambaram, G.R. Edwards, and D.L. Olson, "Kinetics of Interlayer Formation on a ?-Al203/Copper-Titanium Alloy Interface", Met. Trans. 25A, pp. 2083-2090 (1994).

153. F.C. Liao, S. Liu, and D.L. Olson, "Effect of Titanium Nitride Precipitates on the Weldability of Nitrogen Enhanced Ti-V Microalloyed Steels", Proc. of 35th ISS Mechanical Working and Steel Processing (MWSP) Conference, vol. 31, pp. 511-522, Pittsburgh, PA, October (1993), ISS-AIME, Warrendale, PA (1994).

154. M. Onsoien, R. Pieters, D.L. Olson, and S. Liu, "The Effect of Hydrogen in an Argon Shielding Gas on Arc Characteristics and Bead Morphology", Weld. J., 74 (1), pp. 10s-15s (1995).

155. C.E. Cross, D.L. Olson, and G.R. Edwards, "The Role of Porosity in Initiating Weld Metal Hot Cracks", Proc. Intn. Conf. on Modeling and Control of Joining Processing, Orlando, FL, December 8-10 (1993), pp. 549-557, AWS, Miami, FL (1994).

156. D.L. Olson, S. Liu, R.H. Frost, G.R. Edwards, and D.A. Fleming, "Nature and Behavior of Fluxes Used for Welding", ASM Handbook, 10th Edition, vol. 6, pp. 55-63, ASM International, Materials Park, OH (1993

157. S. Liu, D.L. Olson, and S. Ibarra, "Underwater Welding", ASM Handbook, 10th Edition, vol. 6, pp. 1010-1015, ASM International, Materials Park, OH (1993).

158. D.L. Olson, Published Review of Book Entitled: Welding Technology-Paton Institute, by Prof. K. Yushchenko, Materials Technology, 9 (5/6), pp. 135-136, 1994.

159. S. Liu, S. Ibarra, and D.L. Olson, "Assessment of Microstructural and Property Prediction Equations in Structural Welding", 1994 Offshore Technology Conference, paper OTC 7497, pp. 299-306, Houston, TX (1994).

160. B. Mishra, D.L. Olson, and S.A. David, "Post Weld Electrotransport Treatment", J. Mat. Eng. and Performance, 3 (5), pp. 612-618 (1994).

161. S. Liu, D.L. Olson, and S. Ibarra, "Electrode Formulation to Reduce Weld Hydrogen and Porosity", Proc. of 13th International OMAE Conf., Materials Eng., vol. 3, pp. 291-298, Houston, TX, ASME, N.Y., February 1994.

162. A.M. Pope, S. Liu, and D.L. Olson, "Effect of the Electrode Oxidizing Potential on Underwater Wet Welds", Proc. of 13th International OMAE Conf., Materials Eng., vol. 3, pp. 361-368, Houston, TX, ASME, N.Y., February, 1994.

163. S.K. Marya, S. Liu, D.L. Olson, and G.R. Edwards, "Underbead Hardness of Heat Affected Zones in Steel", Proc. of 1st Intern. Conf. of Materials and Manufacturing Technologies, Cluj-Napoca, Romania, May 18-20 pp. 17-24 (1994).

164. D.A. Fleming, A.Q. Bracarense, D.L. Olson, and S. Liu, "Toward Developing SMA Welding Electrode L for HSLA-100 Grade Steel", Welding Journal, 75 (6), pp. 171s-183s (1996).

165. S. Ibarra, D.L. Olson, and S. Liu, "Underwater Wet Welding of Steel", Interpretive Report, WRC Bullitin 401, Welding Research Council, N.Y., N.Y., May (1995).

166. D.A. Fleming, S. Liu, and D.L. Olson, "Development of a Shielded Metal Arc Welding Consumable for HSLA-100 Plate Steel", SP-7 Report NSRP 0430, pp. 1-165, U.S. Navy Carderock Division, Naval Surface Warefare Center, October (1994).

167. J.E. Ramirez, S. Liu, and D.L. Olson, "Synergistic Precipitation Strengthening Effects of Copper and Niobium in High Strength Steel Weld Metal, Mat. Sci. & Eng. A, MA216/1-2, pp. 91-103, October 15 (1996).

168. S. Liu, D.L. Olson, and S. Ibarra, "Pyrometallurgy and Physical Metallurgy of Underwater Wet Welds", Proc. of the 42nd Australian National Welding Conference (WTIA), vol. 2, paper 25, Melbourne, Australia (1994).

169. A. Sanchez Osio, S. Liu, and D.L. Olson, "Soldadura Submarina Mojada", Memoria Tecnica, 2 do. Congreso Internacional de La Soldadura en Mexico, November 9-11, 1994, pp. 177-188, Colegio de Ingenieros Mecanicos y Electricistas, and Institute Technologico y de Estudios Superiores de Monterrey, Campus Estado de Mexico, Monterrey, Mexico (1994).

170. M.I. Onsoien, S. Liu, and D.L. Olson, "Use of Active Shielding Gases to Optimize the Weld Metal Microstructure", Proc. OMAE, vol. III, Materials Engineering, pp. 503-507 (1995).

171. J.S. Ogborn, D.L. Olson, and M.J. Cieslak, "Influence of Solidification on the Microstructural Evolution of Nickel Base Weld Metal", J. Mat. Sci. and Eng., A, MSA 203/1-2, pp. 134-139, November 15, (1995).

172. M.I. Onsoien, S. Liu, and D.L. Olson, "Shielding Gas Oxygen Equivalent in Weld Metal Microstructure Optimization", Welding J., 75, pp. 216s-224s, (1996).

173. S. Liu and D.L. Olson, "The Effect of Altitude on Welding", Proc. of the 4th International Conference on Trends in Welding Research, Gatlinburg, TN, June 5-9 (1995), pp. 347-352, ASM, Materials Park, OH (1996).

174. D.L. Olson, S. Liu, W. Wang, R.R.G.M. Pieters, and S. Ibarra, "Martensite Start Temperatures as a Weldability Index", Proc. of the 4th International Conference on Trends in Welding Research, Gatlinburg, TN, June 5-9 (1995), pp. 615-620, ASM, Materials Park, OH (1996).

175. D.L. Olson and S. Liu, "The Physical and Chemical Behavior of Welding Consumables", Proc. of the 4th International Conference on Trends in Welding Research, Gatlinburg, TN, June 5-9 (1995), pp. 299-310, ASM, Materials Park, OH (1996).

176. A. Sanchez-Osio, S. Liu, D.L. Olson, and S. Ibarra, "Designing Shielding Metal Arc Consumables for Underwater Wet Welding in Offshore Applications", Trans. ASME 117 (8), pp. 212-220 (1995).

177. W.W. Wang, R. Wong, S. Liu, and D.L. Olson, "Use of Martensite Start Temperatures for Hydrogen Control", Proc. of Shipbuilding Welding Conf., TMS, Cleveland, OH, October (1995), pp. 17-31, Welding and Weld Automation in Shipbuilding, TMS, Warrendale, PA (1996).

178. K.A. Lindahl, D.L. Olson, and J.U. Trefny, "Alloy Phase Analysis from Measurements of Bulk Magnetic Properties", in Met. & Mat. Trans., 27A, pp. 2958-2965 (1996).

179. C.E. Grubbs, A.E. Bertelmann, S. Ibarra, S. Liu, D.J. Marshall, and D.L. Olson, "Underwater Welding and Cutting", AWS Welding Handbook, 8th Edition, Volume 3, Materials and Applications, pp. 801-858, AWS, Miami, FL (1995).

180. A. Wahid, D.L. Olson, D.K. Matlock, and T.J. Kelly, "The Influence of Homogeneities of Controlled Solidification Single Crystal Cu-10 Ni Alloy on Fatigue Crack Propagation Rate", Proceedings SITRA 93, pp. 211-217, Bandung, July 27-29 (1993).

181. D.L. Olson (Focus Officer), "Hydrogen Management in High Strength Steel Weldments for Defense Applications", Operating Assignment Summary, PTP1-013, The Technical Cooperation Program, Annual Report 1995, Sub-Group P - Materials Technology, Technical Panel 1 - Metal Technology and Performance, Report P-TP1/7/95, United States Army Research Office (1995).

182. D.L. Olson, S. Liu, A. Wahid, and I. Maroef, "Some Trends of Weld Metal Research", Proceedings of Indonesian Welding Convention, Keynote Paper, pp. 1-17, Bandung, West Java, Indonesia, March 19-20 (1996).

183. W.W. Wang, S. Liu, and D.L. Olson, "Consequences of Weld Undermatching and Overmatching; Non-Uniform Hydrogen Distribution", Proceedings of OMAE 1996, vol. III - Materials Engineering, pp. 403-409, Florence, Italy (1996).

184. J.D. Olivas, D.L. Olson, and B. Mishra, "Estimation of Bond Integrity of Solid State Bonded Dissimilar Metals", Proc. of Fifth International Symposium on Processing and Fabrication of Advanced Materials V, Cincinnati, OH, pp. 313-333, TMS, Warrendale, PA, October (1996).

185. D.L. Olson, I. Maroef, C. Lensing, R.D. Smith, W.W. Wang, S. Liu, T. Wildeman, and M. Eberhart, "Hydrogen Management in High Strength Steel Weldments", Seminar Proceedings of "Hydrogen Management in Steel Weldments", Paper 1, pp. 1-19, WTIA, Melbourne, Victoria, Australia, October 23, 1996.

186. D.L. Olson, Technological Review: "New Industrial Opportunities Described at the Fourth International Conference on Trends in Welding Research", Materials Technology, 11 (6), pp. 248-250 (1996).

187. A. Sanchez-Osio, S. Liu, and D.L. Olson, "The Effect of Solidification on the Formation and Growth of Inclusions in Low Carbon Steel Welds", Mat. Sci. & Eng. A221 (1-2), pp. 122-133, December 30 (1996).

188. J.D. Skaggs and D.L. Olson, "Surface Contamination Effects During Laser Beam Welding of Ti-6Al-4V", Proceedings of Joining and Repair of Gas Turbine Components, ASM, September 14-18, 1997, Materials Park, Ohio, pp. 119-124 (1997).

189. J.D. Olivas, B. Mishra, and D.L. Olson, "Prediction of Bond Strength in Solid State Bonding Processes", Proceedings ICRAMP-97, "Recent Advances in Metallurgical Processes", vol. 2, pp. 1025-1034, Bangalore, India, Indian Institute of Science, New Age International, Ltd., New Delhi (1997).

190. W. Wang, S. Liu, and D.L. Olson, "Computer Simulation of Hydrogen Diffusion for Underwater Welding", OMAE Paper 98-2205, ASME, Philadelphia, PA, July 6-9 (1998).

191. D.L. Olson, I. Maroef, and C. Lensing, "The Role of Hydrogen Trapping in Hydrogen Management of Steel Welding", Proc. Indian Welding Seminar (NWS '97), pp. 9-24, Bangalore, India, December 11-13, Indian Institute of Welding, Bangalore Branch, (1997).

192. I. Maroef, D.L. Olson, and G.R. Edwards, "Hydrogen Assisted Cracking in High Strength Steel Weldments", Proc. of International Conference on "Welding and Related Technologies for the XXI Century", Kiev, Ukraine, November (1998), pp. 166-176 (in Russian) and in Welding and Surfacing Review, 1998, vol. 12, pp. 209-225 (in English) (1998).

193. S.D. Kiser, C.W. Case, J.H. Devletain, J.F. King, J.C. Lippold, D.L. Olson, and C.L. Schmidt, Clad and Dissimilar Metals, AWS Handbook, 8th Edition, vol. 4, Chapter 6, pp. 333-389, American Welding Society, Miami, FL (1998).

194. K.S. Johnson, S. Liu, and D.L. Olson, "Hydrogen Control and Microstructural Refinement of Structural Steel Welds Using Fluoride-Containing FCAW Electrodes", Prod. 17th Intern. Conf. on Offshore Mechanics and Arctic Engineering, ASME/OMAE, Paper OMAE-98-2801, Lisbon, Portugal, July 6-10 (1998).

195. S. Liu, D.L. Olson, and S. Ibarra, "Critical Issues on Quality Underwater Wet Welding: A Review", Proc. Mexican Welding Conference: Memorias Primer Simposium Internacional de Soldadus (SIS '98), pp. 69-91, Monterray, N.L., Mexico, March 12-14 (1998).

196. D.L. Olson, S. Liu, and S. Caldwell, "Use of Intermetallic Alloys as Additions to Tungsten Electrodes", Proc. 3rd Pacific Rim Conf. on Adv. Mat. and Proc., (PRICM), pp. 2265-2274, Honolulu, HAWAII, July 1998, TMS, Warrendale, PA (1998).

197. D.L. Olson, "High Energy Density Welding", IIW Commission IV Report, July 13-19, 1997, ,50th Annual Assembly, Welding Research Council, WRC Welding Research News (4), pp. 1-3 (1998).

198. J.W. Allen, D.L. Olson, and R.H. Frost, "Exothermically Assisted Shielded Metal Arc Welding", Welding Journal, 77 (7), pp. 277s-285s (1998).

199. D. Wenman, D.L. Olson, D.K. Matlock, and M.J. Cieslak, "Sigma Phase Formation Kinetics in Stainless Steel Laminate Composites", Trends in Welding Research, pp. 125-130, Pine Mtn., GA, ASM, Materials Park, OH (1999).

200. Y. Park, A. Landau, G.R. Edwards, and D.L. Olson, "The Role of Retained Austenite in the Hydrogen Management of High Strength Steel Welds", Proc. of Int. Conf. on Trends in Welding Research, pp. 31-36, Pine Mtn., GA, ASM, Materials Park, OH (1999).

201. D.L. Olson and G.R. Edwards, "Interfacially Driven Mass Transport in Joining and Coating Technologies", Phil. Trans. R. Soc. Lond. A, 356, pp. 927-940 (1998).

202. D.L. Olson and G.R. Edwards, "Interfacially Driven Mass Transport in Joining and Coating Technologies", Marangoni and Interfacial Phenomena in Material Processing, pp. 113-126, The Univ. Press, Cambridge, UK (1998).

203. J.H. Kim, R.H. Frost, and D.L. Olson, "Electrochemical Oxygen Transfer During Direct Current Arc Welding", Welding Journal, 77, pp. 488s-494s (1998).

204. W.J. Engelhard, D.L. Olson, and B. Mishra, "Dissolution of Gaseous Hydrogen in High Strength Steels at Elevated Temperature", Conf. Proc. of Advanced and Specialty Materials, "Dissolution of Gases Hydrogen in High Strength Steels at Elevated Temperatures", pp. 133-140, ASM, Materials Park, OH (1998).

205. B. Mishra, D.L. Olson, and D. Fazzina, "Development of Hardfacing Consumable Material from Iron Carbide", Surface Engineering: Science and Technology I, pp. 463-474, TMS, Warrendale, PA (1999).

206. N. Eliaz, D. Eliezer, and D.L. Olson, "Hydrogen-Assisted Processing of Materials", in Mater. Sci. Engr. A., 289, pp. 41-53 (2000).

207. M.D. Clark and D.L. Olson, "The Role of Welding Parameters in Hydrogen Management", Proc. of Hydrogen Management of High Strength Steel Welds, pp. 215-228, CANMET, Ottawa, Ontario, Canada (1999).

208. M.E. Eberhart, D. L. Olson, and I. Maroef, " Modelling Hydrogen Behavior", Proc. of Hydrogen Management of Hign Strength Steel Welds, pp.111-122, CANMET, Ottawa, Ontario, Canada (1999).

209. S.W. Pierce, P. Burgnardt, and D.L. Olson, "Thermocapillary and Arc Phenomena in Stainless Steel Welding", Welding Journal 78 (2), pp. 45s-52s (1999).

210. D.L. Olson, Conference Report: "Fifth International Conference on Trends in Welding Research", Mat. Tech., 41 (1), pp. 25-28 (1999).

211. D.L. Olson, B. Mishra, and D.W. Wenman, "Welding, Brazing, and Joining of Refractory Metals and Alloys", Reactive and Refractory Metals, Gordon and Breach, N.Y., N.Y., pp. 1-23 (2000), Min. Proc. Ext. Met. Rev., vol. 22, pp. 1-23 (2001).

212. C. E. Cross, S. Liu, and D.L. Olson, "Aluminum Welding", Vol 1, Physical Metallurgy, Chapter 9, pp 481-532, in Handbook of Aluminum, Editors G. E. Totten and D. S. Mackenzie, Marcel Dekker, N.Y., N.Y. (2003).

213. D.L. Olson, V.I. Kaydanov, and D.W. Wenman, "Electronic and Magnetic Techniques to Determine Microstructure and Phase Stability", in Non Destructive Characterization of Materials IX, Amer. Inst. of Physics, AIP Conf. Proceedings 497, pp. 120-127, Melville, NY (1999).

214. S.H. Wang, D.K. Matlock, and D.L. Olson, "Analysis of Effect of Dynamic Compositional Fluctuation on Weld Metal Creep Based on Laminate Composite Simulation", J. Sci. Techn. of Welding and Joining, 4 (3), pp. 170-171 (1999).

215. R.D. Smith III, D.K. Benson, G.P. Landis, D.L. Olson, and T.R. Wildeman, "Advanced Methods for Hydrogen Determination in High Strength Steels", in Joining of Advanced and Specialty Materials II, ASM Conf., Cincinnati, OH, November 1-4, 1999, pp. 275-283, ASM, Materials Park, Ohio (2000).

216. I.S. Maroef, Y.D. Park, C. Lensing, A. Landau, and D.L. Olson, "Hydrogen Trapping of High Strength Steel Weld Metal", in Joining of Advanced and Specialty Materials II, pp. 284-291, ASM Conf., Cincinnati, OH, November 1-4, 1999, ASM, Materials Park, OH (2000).

217. I.S. Maroef and D.L. Olson, "Fundamental Aspects of Hydrogen Trapping in Steel Weld Metal", in Joining of Advanced and Specialty Materials II, pp. 227-235, ASM Conf., Cincinnati, OH, November 1-4, 1999, ASM, Materials Park, OH (2000).

218. I.S. Maroef and D.L. Olson, "The Effect of Composition, Hydrogen Traps and Thermal on Hydrogen and Distribution in Steel", Proc. 19th ASM Heat Treating Society Including Steel Heat Treating in the New Millennium, pp. 543-551, November 1-4, 1999, Cincinnati, OH, ASM International, Materials Park, OH (2000).

219. R.D. Smith II, D.L. Olson, T.R. Wildeman, and D.K. Benson, "Fiber Optic Sensor for Diffusible Hydrogen Determination in High Strength Steel", Proc. SPIE Photonics 2000, vol. 3945, pp.174-184, January 25, 2000, San Jose, CA (2000).

220. R.D. Smith II, G. Plandis, I. Maroef, D.L. Olson, and T.R. Wildeman, "The Determination of Hydrogen Distribution in High Strength Steel Weldments: Part I: Laser Ablation Methods", Welding Journal, vol. 80, pp. 115s-121s (2001).

221. R.D. Smith II, B.K. Benson, I. Maroef, D.L. Olson, and T.R. Wildeman, "The Determination of Hydrogen Distribution in High Strength Steel Weldments: Part II: Optoelectronic Diffusible Hydrogen Sensor", Welding Journal, vol. 80, pp. 122s-126s (2001).

222. M.E. Eberhart, D.L. Olson, and I. Maroef, "Modeling Hydrogen Behavior", in Hydrogen Management for Welding Applications, pp. 111-122, Publ. Materials Technology Laboratory/CANMET, Ottawa, Canada (1999).

223. D.L. Olson, "Consumibles Para Electrodos Auto Protegidos (SMAW-FCAW), Asistidos Exothermicamente Para Soldaduras de Reparacion" pp. 182-190, Proceedings II Conferencia y Exposicion del Caribe, Marzo 15-16, 2000, Caracas, Venezuela (2000).

224. D.L. Olson, "La Influencia De Los Gradientes Microstructurales en LAS Propiedades Y Comportamiento De LAS Soldaduras", pp. 429-443, Proceedings II Conferencia y Exposicion del Caribe, Marzo 15-16, 2000, Caracas, Venezuela (2000).

225. S. Liu and D.L. Olson, "Stepwise Methodology of Welding Flux Formation: From Rutile Grade to Ca0-CaF2 Grade", Proceeding of Molten Slags, Fluxes and Salts Conference, on Conf. CD, Slags 2000, July 13-17, 2000, Stockholm, Sweden, and Helsinki, Finland (2000).

226. S. Liu, I. Maroef, D.L. Olson, and M. Matsushita, "Hydrogen Management Strategies in Flux-Related Arc Welding", Proc. of IIW Asian Pacific Intn. Congress, October 29-November 2, 2000, Melbourne, Victoria, Australia (2000), vol.1, paper 10, 12 pages (2000).

227. Y.D. Park, I.S. Maroef, A. Landau, and D.L. Olson, "Retained Austenite as a Hydrogen Trap in Steel Welds", Welding Journal, vol. 81 (2), pp 27s-35s (2002).

228. M. Marya, D.L. Olson, and G.R. Edwards, "Welding of Magnesium Alloys for Transportation Applications, Joining of Advanced and Specialty Materials III, pp. 122-128, October 9-11, 2001, ASM Materials Week, St. Louis, MO, ASM, Materials Park, OH (2001).

229, S. Liu, G.R. Edwards, D.L. Olson, and M. Marya, "Laser Processing Research at the Colorado School of Mines", Proc. of IIW Asian Pacific Int. Congress, October 29 - November 2, 2000, Melbourne, Australia, vol. 2, paper 62, 18 pages (2000).

230. R. D. Smith III, D.K. Benson, J. Roland Pitts, D.L. Olson, and T. K. Wildeman, "Fiber Optic Sensor for Measurement of Diffusible Weld Hydrogen: Measurements by Fiber Optic Sensors", Material Prueung, vol. 43, (1-2), pp. 26-29 (2001).

231. Y.D. Park, I. Maroef, A. Landau, and D.L. Olson, "Hydrogen Trapping and Cracking Susceptibility with Different Restraint Stress Severity in Retained Austenite of High Strength Steel Welds", Proc. of 20th ASM Heat Treating Society Conf., October 9-12, 2000, St. Louis, MO, ASM, Materials Park, OH (2001).

232. D.L. Olson, S. Liu, and G.R. Edwards, "Materials Science of Non-Uniform Systems for Interpretation of Weld Metal Behavior", Proc. 7th Intern. Aachener Schweisstechnik Kolloquim, High Productivity Joining Processes: Fundamentals, Applications, and Equipment, vol. II, pp. 831-847, May 3-4, 2001, Aachen, Germany, Shaker Verlag, Germany (2001).

233. Y.D. Park, C. Lensing, I. Maroef, D.L. Olson, and Z. Gavra, "Advances in Hydrogen Management for High Strength Steel", Proceedings of 9th CF/DRDC Meeting on Naval Applications of Materials Technology, Dartmouth, Nova Scotia, Canada, pp 215-231, Defence Research Establishment Altantic, Special Report DREA SR 2001-094, June (2001).

234. M. Marya, G.R. Edwards, S. Marya, and D.L. Olson, "Fundamentals in the Fusion Welding of Magnesium and Its Alloys", Proc. of the 7th Int. Symposium of the Japan Welding Society on "Today and Tomorrow in Science and Technology of Welding and Joining", November 20-22, 2001, Kobe, Japan (2001).

235. M. Marya, D.L. Olson,V. Kaydanov and S Liu, "Semi-Empirical Correlations and Electronic Model for Thermoelectron Enhancing Particles in GTAW Cathodes", Proc. on Joining of Advanced and Specialty Materials IV, ASM Materials Solution Conference and Exposition, pp. 98-107, November 5-8, 2001, Indianapolis, IN (2002).

236. D.L. Olson, B. Mishra, R. D. Smith II, S. Niyomsoan, P. Termsuksawad, Y.D. Park, V. Kaydanov, Z. Gavra, and R.B. Goldfarb "Advances in Weld Hydrogen Sensors, Intern. Conference on Joining of Advanced and Specialty Materials IV, pp. 118- 124, ASM Materials Solution Conference and Exposition, November 5-8, 2001, Indianapolis, IN, ASM, Materials Park, OH. (2002).

237. I. S. Maroef, D. L. Olson, M. Eberhart and G. R. Edwards, "Hydrogen Trapping in Ferritic Steel Weld Metal", Int. Mat. Rev., vol. 47 (4), pp. 191-223 (2002).

238. D. L. Olson, D. Zander, B. Mishra, Z. Gavra, R. D. Smith, and Y. D. Park, " Advanced Analytical Approach to Determine Hydrogen Contents in Welds", Proc. Int. Conf. on Technological and Research Developments in Welded Defence Equipment, paper 16, pp. 1-11, Melbourne, Victoria, Australia, 18-19 March 2002, WTIA, Silverton, NSW, 1811 (2002).

239. S. Liu and D. L. Olson, "Weld Metal Design: From Flux Coating to Microstructure", Proceedings of the 6t th International Conference on Trends in Welding Research, pp 529-535, 15-19 April 2002, Pine Mountain, Georgia, ASM Intl., Materials Park, OH, (2003).

240. D. L. Olson, Y. D. Park, V. Kaydanov, R. D. Smith, Z. Gavra, A. Landau, D. Zander, and R. D. Goldfarb, "Advances in Hydrogen Sensors for Welds", Proceedings of the 6 th International Conference on Trends in Welding Research, pp 551-556, 15-19 April 2002, Pine Mountain , Georgia, ASM Intl., Materials Park, OH, (2003).

241. I. Maroef and D. L. Olson, " Evaluation of Hydrogen Trapping for Hydrogen Management in Steel Welding", Proceedings of the 6 th International Conference on Trends in Welding Research, 15-19 April 2002, pp 557-562, Pine Mountain, Georgia, ASM Intl., Materials Park, OH, (2003).

242. C. A. Lensing, I. S. Maroef, Y. D. Park and D. L. Olson, Irreversible Hydrogen Traps in High Strength Steel Weld Metal, in Hydrogen Effects on Material Behavior and Corrosion Deformation Interactions, pp. 73-82, TMS, Warrendale, PA (2003).

243. P. Termsuksawad, S. Niyomsoan, B. Mishra, R. B. Goldfarb, D. L. Olson, and Z. Gavra, Measurement of Hydrogen by Magnetic and Electronic Techniques in Metallic Materials, 201st Electrochemical Society Meeting, Philadelphia, PA., 13 pages, May 12-17, (2002).

244. T. Siewert, K. Hildebrant, L. W. Myers, Jr., J. Doherty, R. Bushey, D. Kotecki, E. Hinshaw, S. Kiser, and D. L. Olson, " Cast Iron Repair of the U. S. Capitol Dome", Proc. Intl. Conf. on "Structural Studies, Repairs and Maintenance of Heritage Architecture", STREMAH, pp 10, 7-9 May 2003, Athens, Greece,(2003).

245. T. A. Siewert, C. N. McCowan, R. A. Bushey, J. Doherty, T. Christ, D. J. Kotecki, D. L. Olson, L. W. Myers, Jr., E. Hinshaw, and S. Kiser, "Weld Repair of the U. S. Capitol Dome", NIST Technical Note 1500-10, Materials Reliability Series, December, 2002, Materials Reliability Division,
Science and Engineering Laboratory, National Institute of Standards and Technology, 38 pages, Washington, D. C. (2002).

246. S. Saidarasamoot, D. L. Olson, J. S. Spencer, and G. Wang, ''Assessment of the Emerging Technologies for the Detection and Measurement of Corrosion Wastage of Coated Marine Structures", Proc. of OMAE'03, the 22nd Intl. Conf. on Offshore Mechanics and Arctic Engineering, Cancun, Mexico, June 8-13, 2003, paper OMAE 2003-37371, pp 1-11, ASME, NY, (2003).

247. D. L. Olson, E. Metzbower, S. Liu and Y. D. Park, " The Development in Property Prediction for Weld Metal", Proc. on Intl. Conf., Paton Electric Welding Institute, Kiev, Ukraine, Nov. 2003, The Paton Welding Journal, 10-11 pp. 31-37 (2003).

248. D. L. Olson, A. N. Lasseigne, M. Marya and B. Mishra, " Weld Features that Differentiate Weld and Plate Corrosion", Practical Failure Analysis Vol. 3 (5) October pp 43-57 (2003).

249. M. Marya, G. R. Edwards and D. L. Olson, "Theoretical Models to Describe Characteristics of Magnesium Alloys Fusion Welds", in Joining of Advanced and Specialty Materials VI, pp. 130-141, (2004).

250. D. Park, A. N. Lasseigne, V. I. Kaydanov, D. L. Olson, A. Landau, M. Pinkas and B. Sarusi, "Thermoelectric Diagnostics for Nondestructive Evaluation of Materials", Proceedings of 10th CF/DRDC Meeting on Naval Applications on Materials Technology, 13-15 May 2003, pp. 648-666, paper 46, DRDC Atlantic, (2003).

251. Y. D. Park, D. L. Olson, A. Landau, M. Pinkas, and V. I. Kaydanov, "The Evaluation of Hydrogen in Monel K-500 by Using the Thermoelectric Power Technique", NACE 2004, New Orleans (2004).

252. D. L. Olson, A. N. Lasseigne, M. Marya, B. Mishra, "Fundamental Models for Corrosion in Fusion Welds- Emphasis on Interfacial and Gradient Effects", in Joining of Advanced and Specialty Materials V, Conf. Proc. of Materials Solutions 02, 7-9 October 2002, Columbus, Ohio, pp. 1-11, ASM Intl, Materials Park, Ohio, 2003.

253. G. Atkins, M. Marya, D. Olson and D. Eliezer, "Magnesium- Lithium Alloy Weldability: A Microstructural Characterization", in Magnesium Technology 2004, pp 37-42,TMS, Warrendale, PA (2004).

254. D. L. Olson, S. Liu, Y. D. Park and J. C. Madeni, "Avances en la Manipulacion del Hidrogeno en Aceros HSLA", Proc. Intl. Conf. on Welding and Joining of Materials 2003, pp. , Pontificia Universidad Catolica del Peru, Lima , Peru Oct 27-29, (2003).

255. D. L. Olson, S. Liu, Y. D. Park, and J. C. Madeni, "Advances in Hydrogen Management fro High Strength Steel", Proc. Intl. Conf. on Welding and Joining of Materials 2003, pp. , Pontificia Universidad Catolica del Peru, Lima , Peru , Oct. 27-29, (2003).

256. D. L. Olson, A. N. Lasseigne, M. Marya, B. Mishra and G. Castro, "Material Science Aspects of Weld Corrosion", Proc. Intl. Conf. on Welding and Joining of Materials 2003, pp., Pontificia Universidad Catolica del Peru, Lima, Peru, October 27-29 (2003).

257. D. L. Olson, A. N. Lasseigne, M. Marya, B. Mishra and G. Castro, "Topicos en Ciencia de Materiales Corrosion de Soldaduras", Proc. Intl Conf. on welding and Joining of Materials 2003, pp. , Pontificia Universidad Catolica del Peru, Lima, Peru, October 27-29 (2003).

258. A. N. Lasseigne, D. L. Olson, T. Boellinghaus, Hans-Joachim Kleebe and R. D. Smith, "Non-Destructive Determination of Nitrogen in Nitrogen Strengthened Austenitic Stainless Steel Weldments Utilizing Thermoelectric Power coefficient Measurements", in Proc. Intl. Conf. High Nitrogen Steels 2004, pp. 577-583, Ostend, Belgium (2004), GRIPS Media GmbH, Bad Harzburg, Germany (2004).

359. H. Wilckens, T. Borzecki, M. Heinemann, F. Lallart, N. Wu, D. L. Olson, J. Y. Park, R. A. Shenoi and Y. Takeda, "Fabrication Technologies", in 15th International Ship and Offshore Congress 2003, vol. 2, pp 189-233, Aug. 11-15,2003, San Diego, Committee V.6 Elsevier, New York (2003).

260. C. A. Lensing, Y. D. Park, I. S. Maroef, and D. L. Olson, " Yttrium Hydrogen Trapping to Manage Hydrogen in HSLA Steel Welds", Welding Journal, vol. 83, pp 254s-266s (2004).

261. C. A. Lensing, I. Maroef, Y. D. Park, and D. L. Olson, "Irreversible Hydrogen Traps in High Strength Steel Weld Metal", in Hydrogen Effects on Materials Behavior and Corrosion Deformation Interactions, pp. 73-82, TMS, Warrendale, PA (2003).

262. R.D. Smith II, D.K. Benson, D.L. Olson, J.R. Pitts, and B.S. Hoffheins, Advances in Low Cost Hydrogen Sensor Technology, American Chemical Society Review, Plenum Publishing Co., N.Y., (2000).

263 A. N. Lasseigne, D. L. Olson, Th. Boellinghaus, and V. I. Kaydanov, "Utilization of Non-destructive Thermoelectric Power measurements for determination of Interstitial Nitrogen Content in Nitrogen-Strengthened Austenitic Stainless Steel Welds", in Proc. QNDE Conf. 2004, CSM, Golden, Colorado, American Institute of Physics, Melville, N. Y. (2004).

264. Y. D. Park, V. I. Kaydanov, B. Mishra and D. L Olson, "Analysis of Microstructure Using Thermoelectric Diagnostics for Non-destructive Evaluation of Materials", in Proc. QNDE Conf. 2004, July 25-30, 2004, CSM, Golden , Colorado, American Institute of Physics, Melville, N. Y. (2004).

265. A. N. Lasseigne, D. L. Olson and Th. Boellinghaus, "Techniques for Determination of Interstitial Nitrogen Content in Nitrogen Strengthened Austenitic Stainless Steel Alloy 1.4565", in Proc. of Intl.Conf. on Trends in Welding Research, May 16-20,2005, Pine Mtn., Georgia, pp. 799-806, ASM,
Materials Park, OH, (2006).

266. A. N. Lasseigne, D. L. Olson and Th. Boellinghaus, " Development of a Non-Destructive Tool for Assessment of Residual Stress in Welds", Proc. Of ASNT Fall Conf. 2004 , pp 141-143, Las Vegas, NV, USA, 15-19, November (2004), ASNT, Columbus, OH, (2004).

267. A. N. Lasseigne, D. L. Olson, and H. J. Kleebe and Th. Boellinghaus, "Microstructural Assessment of Nitrogen-strengthened Austenitic Stainless Steel Welds Utilizing Thermoelectric Power", Met. Mat.Trans.,Vol. 36A (11), pp. 3031-3039, (2005).

268. Y. D. Park, D. L. Olson, B. Mishra and A. N. Lasseigne, Thermoelectric Power Assessment of Weld Microstructure, Phase Stability, Residual Stress and Properties", in Proc. Intl. Conf. on Trends of Welding Research, MAY 16-20, 2005, Pine Mtn., Georgia, pp. 497-505, ASM, Materials Park, OH, (2006).

269. G. R. Edwards, J. Lippold, J. Dupont, Dl. L. Olson, and S. Liu, "Welding and Joining in Materials
Engineering Education", in proceedings of 2005 MS&T Symposium on "What Makes a Good Materials Engineer and How Best to Educate Them", pp 11-17, Pittsburgh, PA, September 25-28, 2005.

270. T. F. Roland, Wu Nie, D. Olson, M. Heinemann, G. Bruce, Y. Han, Y. Takeda, A. Imakita," Fabrication
Technology", Proc. 16th International Ship and Offshore Structures Congress, Volume 1, Specialist
Committee V.3, pp. , 20-25 August 2006, Southhampton, UK, (2006).

271. G. Castro, D. L. Olson, C. D. Dallam and D. Fedor, " Small-Batch Metal-Cored Welding Repair Consumables", AWS 2005, November 13-16, 2005, Chicago, Il.

272. J. E. Jackson, A. N. Lasseigne, S. Liu, D. L. Olson, and E. Metzbower, " Engineering Weld Design- Arc Hybrid Welders in our Future", AWS 2005, November 13-16, 2005, Chicago, Il.

273. E.A. Metzbower, D.L. Olson, and N. Yurioka, "A Neural Network Analysis of Oxygen in Weld Metals",
IIW Commission IX Document, Number, Quebec City, Canada, American Council, AWS, Miami, Florida, 2006.

274. T. Borzecki, G. Bruce, Y. S. Han, M. Heinemann, A. Imakita, B. L. Josefson, W. Nie, D. Olson, F. Roland, and Y. Takeda, "Fabrication Technology", Specialist Committee V. 3, Proc. 16th International Ship and Offshore Structure Congress, Vol. 2, pp 107-155, 20-25 August, Univ. of Southampton Press, Southampton, UK, (2006).

275 B. Mishra, A. Lasseigne and D. L. Olson, "Role of Solidification on Nitrogen-Strengthened Austenitic Stainless Steel Weldments", Proc. International Conference on Solidification Science and Processing-Emerging Trends 9ICSSP III), Nov. 19-23, 2006, Jaipur, India. (2006).

276. E. A. Metzbower, D. L. Olson and N. Yurioka, "A Neural Network Analysis of Oxygen in Weld Metals", IIW document IX-2206-06, American Council , IIW, American Welding Society, Miami, FL, September (2006).

277. D. l. Olson, Y. D. Park, J. E. Jackson, and A. N. Lasseigne-Jackson, " Engineered Weld Design: Are Composite Welds Likely in the Future", Proceedings Korean Intl. Welding Conf. 2007. Seoul, Korea, (2007).

278. Y. D. Park, A. N. Lasseigne-Jackson, J. E. Jackson, B. Mishra, D. L. Olson, and T. Koenig,
"Characterization of Weldments Using Thermoelectric Power Measurements", Proceeding of Korean Intl.
Welding Conf. 2007, Seoul, Korea (2007).

279. S. Kunda, S. Chatterjee, D. L. Olson, and B. Mishra, "Effects of Intermetallic Phases on the Bond Strength
of a Diffusion-bonded Joints between Titanium and 304 Stainless Steel using Nickel Interlayer", Met.
Trans. Vol, 38A , (9), pp. 2053-2060, (2007).

280. A. N. Lasseigne-Jackson, K. Moline, J. Scott, J. Rawers, J. E. Jackson, D. L. Olson, and B. Mishra, "Synergistic Interstitial Control of Sensitization and Pitting in Stainless Steel Weldments", Proc.Stainless Steel World 2006, pp. 1-8, Houston, TX , November 14 (2006).

281. D.L. Olson, J.E. Jackson, A.N. Lasseigne-Jackson, B. Mishra, T. Koenig, Y.D. Park, and A. Landau, "Weld Assessment by Thermoelectric Power Measurements", for publication in the proceedings of the International Conference of Welding and Joining of Materials, Cusco, Perú 16-18 April 2007.

282. D.L. Olson, A.N. Lasseigne-Jackson, J.E. Jackson, and T. Koenig, "Engineered Weld Design: Use of Composite Concepts", for publication in the proceedings of the International Conference of Welding and Joining of Materials 2007, Cusco, Perú 16 - 18 April 2007.

283. J.D. Park, A.N. Lasseigne-Jackson, J.E. Jackson, B. Mishra, D.L. Olson, and T. Koenig, "Characterization of Weldments and Materials Using Thermoelectric Power Measurements" for publication in the proceedings of the International Joining and Welding Conference, Korea, May 10-12, 2007.

284 D.L. Olson, Y.D. Park, S. Liu, J.E. Jackson, A.N. Lasseigne-Jackson, and E.A. Metzbower, "Engineered Weld Design: Are Composite Welds Likely in the Future?" for publication in the proceedings of the International Joining and Welding Conference, Korea, May 10-12, 2007.

285. J.E. Jackson, D.L. Olson, S. Liu, R. Hellner, and A.N. Lasseigne-Jackson, "Ultra-Supercritical Steam Boiler Steel Weld Repair: Consumable, Procedure, and Practice Selection" in progress for Publication in the AWS Welding Journal, 2007.

286. S. H. Malene, Y. D. Park, and D.L. Olson, "Response of Exothermic Additions to the Flux Cored Arc Welding Electrode -Part 1", Welding Journal Vol. 86 (10), pp 293s-302s (2007).

287. S. H. Malene, Y. D. Park, and D.L. Olson, "Response of Exothermic Additions to the Flux Cored Arc Welding Electrode -Part 2", Welding Journal, Vol. 86 (11), pp. 349s-359s , (2007).

288. J. E. Jackson, D. L. Olson, S. Liu, R. L. Hellner, A. N. Lasseigne-Jackson, and G. C. Trickel, "Calibration of Electronic Property Measurements with Larson-Miller Parameter for Service Life Assessment", Proc. of Boiler Tube and HRSG Tube Failure and Inspection Conference, Calgary, Alberta, Canada, EPRI, Palo Alto, California, October (2007).

289. S. Kundu, S. Chatterjee, D.L Olson and B. Mishra, "Interface Microstructure and Strength Properties of the Diffusion Bonded Joints of Titanium /Cu Interface/ Stainless Steel",Met. Trans., Vol. 39 A, (2008).

 

Publications: National Academy of Science Reports

1. E.F. Bradley, N.C. Cole, D. Hauser, D.G. Howden, D.L. Olson, L. Reed, M.L. Torti, and R.K. Wilson, "Advanced Joining Technology", National Materials Advisory Board report NMAB 387, National Academy Press, Washington, D.C. (1982).

2. A.D. Haff, A.H.S. Ang, G.C. Lee, P.W. Marshall, M.D. Ochi, D.L. Olson and R.W. Rumke, "Recommendations for the Interagency Ship Structure Committees Fiscal 1986 Research Program", pp. 1 64, Committee on Marine Structures, Marine Board, National Research Council, National Academy Press, Washington, D.C. (1985).

3. J.W. Evans, G.C. Lee, P.W. Marshall, M.D. Ochi, D.L. Olson, R. Plunkett and R.W. Rumke, "Recommendations for the Interagency Ship Structure Committee's Fiscal 1987 Research Program", pp. 1 61, Committee on Marine Structure, Marine Board, National Research Council, National Academy Press, Washington, DC (1986).

4. J.H. Evans, J.P. Fischer, G.C. Lee, M.K. Ochi, D.L. Olson, R. Plunkett, and R. Rumke, "Recommendations for the Interagency Ship Structure Committee's Fiscal 1988 Research Program", pp. 1 78, Committee on Marine Structure, Marine Board, National Research Council, National Academy Press, Washington, DC, (1987).

5. J. Harvey Evans, C.A. Cornell, J.P. Fischer, G.C. Lee, M.K. Ochi, D.L. Olson, R. Plunkett and C. Lincoln Crane, Jr., "Recommendations for the Interagency Ship Structure Committee's Fiscal 1989 Research Program", 68 pages, Committee of Marine Structure, Marine Board, National Research Council, National Academy Press, Washington, DC (1988).

6. S.G. Stiansen, C.A. Cornell, J.P. Fischer, G.C. Lee, M.K. Ochi, D.L. Olson, and A.B. Stavovy, "Recommendations for Interagency Ship Structure Committee Fiscal 1990 Research Program", pp. 83, Committee on Marine Structures, Marine Board, National Research Council, National Academy Press, Washington, DC (1989).

7. S.G. Stiansen, Al. Cornell, P.A. Gale, G.C. Lee, D.L. Olson, P.H. Wirching, and A.B. Stavory, Committee on Marine Structures, "Recommendations for the Interagency Ship Structure Committee's Fiscal 1991 Research Program", Report DTCG 88 C 20025, pp. 60, National Academy Press, Washington, DC (1990).

 

Research Reports

1. D.L. Olson, "Distinguishing Properties of Flexible Circuits", Texas Instruments Technical Memorandum TM 03 70 3, SRDL, Dallas Texas, April 25 (1970); "Further Testing of Flexible Circuit Tapes", TM 03 70 4, SRDL, June 22 (1970).

2. D.L. Olson, "Adhesive Selection for Maintaining Silicon Slices", Texas Instruments Technical Memorandum, TM 03 70 6, SRDL, July 6 (1970).

3. D.L. Olson, "Impurity Controlled Sintered Ceramic Dielectric Layers", Texas Instruments Technical Report, TR 03 70 81, SRDL, July 30 (1970).

4. D.L. Olson, "Binder Burnout Investigation", Texas Instruments Technical Memorandum, TM 03 70 9, SRDL, August 12 (1970).

5. D.L. Olson and H.P.K. Hentzschel, "Heat Tap Process (Protected by Trade Secret), Texas Instruments Technical Report, TR 03 70 84, August 17 (1970).

6. M. O'Brian, D.T. Larson, C.R. Rice, and D.L. Olson, "Recommendation for Cleaning Procedure for Solid State Posts Prior to Coating", Rocky Flats Report, Dow Chemical Company, Golden, Colorado (September 1974).

7. D.L. Olson and W.L. Bradley, "Liquid Lithium Corrosion Research", Report COO 2313 1 (December 31, 1973), report COO 2313 2 (December 31, 1974), and report COO 2313 3 (December 31, 1975), submitted to the Department of Energy.

8. D.L. Olson, "Solid State Bonding of Beryllium", in Proceedings of JOWOG22 Beryllium Physical Metallurgy Committee Meeting, (September 23 24, 1975).

9. D.L. Olson and W.M. Mueller, "Comprehensive Survey of Material Problems Associated with Welding in the Mining Industry", for United States Bureau of Mines, CSM Final Report GO166160, pp. 67, (November 1977).

10. D.L. Olson, "Investigation of the MnO SiO2 Oxides and MnO SiO2- Fluorides Welding Flux Systems", Report submitted to the United States Army Research Office on Contract DAAG29 76 G 0143 (June 30, 1976, June 30, 1977, and June 30, 1978).

11. D.A. Bates, G.R. Edwards, and D.L. Olson, "A Preliminary Evaluation of Selected Alloys for High Temperature Lithium Containment", under Contract N61533 77 1877, Report submitted to David Taylor Naval Ship Research and Development Center, Annapolis Laboratory (January 1978).

12. G.R. Edwards and D.L. Olson, "Corrosion Screening Tests for Lithium Containment Alloys", Report submitted to Lawrence Livermore Laboratory, Department of Energy (September 1978).

13. R.W. Krenzer, M.R. Lundberg, D.L. Olson, and R.A. Patterson, "Technical Assessment of Extrusion Press Facility", MTGM 79 54, Rockwell International, Rocky Flats Plant (May 9, 1979).

14. D.L. Olson and D.K. Matlock, "Ferrous Alloy Metallurgy Liquid Lithium Corrosion and Welding", Report COO 2313 8, submitted to the United States Department of Energy (December 31, 1978) and Progress Report C00 2313 9 (December 1979).

15. D.K. Matlock and D.L. Olson, "Rubidium and Rubidium and Rubidium Hydroxide Corrosion", Final Report to EG&G Idaho (February 17, 1981).

16. G.R. Edwards, D.K. Matlock, and D.L. Olson, "A Comparison of Fatigue Behavior in Surface, Habitat and Underwater Wet Welds", Report for Gulf Research and Development Company, Pittsburgh, PA 15230 (April 1981).

17. G.R. Edwards, D.K. Matlock, and D.L. Olson, "Fatigue Behavior of Weldments for Offshore Structures", Report for Gulf Research and Development Company, Pittsburgh, PA (April 1982).

18. G.R. Edwards, D.L. Olson, and D.K. Matlock, "Titanium Welding Metallurgy", ONR Research Report (July 1982).

19. S.E. Swinney, D.L. Olson and G.R. Edwards, "A Feasibility Study of the Effect of Pulsed Welding Current on the Nucleation of New Grains in Ti 6Al 4V Weld Metal", Report for Martin Marietta Corporation, Denver, Colorado (June 20, 1984).

20. D.K. Matlock, D.L. Olson, G.R. Edwards, "Effect of Seawater on the Fatigue Crack Propagation Characteristics of Welds for Offshore Structures", MOE Eng. Assoc. Report, submitted to Gulf Research and Development Company, Pittsburgh, PA (September 1984).

21. D.L. Olson, "United States Army Welding Research and Development Topical and Coordination Meeting", Report MT CWR 85 001, submitted to U.S. ARO, Research Triangle Park, N.C. (March 19, 1985).

22. M.M.R. Castro, C.A. Natalie and D.L. Olson, "Analysis of Can Integrity and Compatibility with Package Material", Phase I Report, Colorado School of Mines Report MT CCR 85 010, February 22, 1985.

23. T.R. Muth, R.H. Frost and D.L. Olson, "Effect of Manufacturing Processes on Failure of High Level Waste Containers", Progress Report, February, 1985 April, 1985, Contract NRC 04 84 121, MT CWR 85 018 (June 1985).

24. C.A. Natalie and D.L. Olson, "Sol Gel Development Progress Report I, Report MT CWR 85 016, submitted to Alloy Rods, Inc., Hanover, PA, May 15, 1985.

25. M.C. Nordin, G.R. Edwards and D.L. Olson, "The Influence of Yttrium Microadditions on Titanium Weld Metal Cracking Susceptibility and Grain Morphology", Report MT CWR 85 021 (June, 1985).

26. C.N. McCowan, D.L. Olson and T.A. Siewert, "New Expressions for Prediction of FN, Based on Weld Metal Composition", WRC Progress Report, New York, NY, November (1986).

27. D.K. Matlock, D.L. Olson, P.T. Oldland, and C.W. Ramsay, "Microstructural Stability of HY130 Steel Weld Deposits as a Function of Consumable Compositions and Thermal History", ONR, Report MT CWR 087 002 (December 31, 1986).

28. G. P. Martins and D.L. Olson, "SiC Foam Infiltration with Si (or Si02 Gel) and Conversion of Infiltration Si (or Si02) to Si3N4, Colorado School of Mines, Report MT CWR 087 009, submitted to Naval Surface Weapons Center, White Oak Laboratory, Silver Springs, Maryland, 20910 (March 31, 1987).

29. R.G. Wendt, G. P. Martins, D.L. Olson, M. S. Misra and S. Rawal, "Update on Ceramic Adhesive Bonding", Proceedings for the Ninth Annual Discontinuous Reinforced Aluminum Material Working Group Meeting, MT CWR 087 020, (1987).

30. R.C. Wendt, G. P. Martins, and D.L. Olson, "Effort to Develop and Advance Sol Gel Ceramic Joining of Gr/Mg Composite Tubes", CSM Final Report MT CWR 087 025, Colorado School of Mines, July 15 (1987).

31. D.L. Olson, "Metallurgical Investigation of 650 Feet Underwater Wet Weld", Final Report CSM Report to Amoco Research and Development Corporation, MT CWR 088 001, December 31 (1987).

32. C.W. Ramsay, P.T. Oldland, D.L. Olson, and D.K. Matlock, "Microstructural Stability of HYl30 Steel Weld Deposits as a Function of Consumable Composition and Thermal History", CSM Report MT CWR 088 008, submitted to DTRC, Annapolis, MD, December 31 (1987).

33. D.K. Matlock and D.L. Olson, "The Role of Composition and Microstructure Gradients on Weld Metal Properties and Behavior", CSM Report MT CWR 088 003, DOE Report DOE/ER/4508 1, January (1988).

34. G.R. Edwards and D.L. Olson, "Investigations into the Infiltration Kinetics and Interfacial Bond Strength of Al/SiC Composites", CSM Report MT CWR 088 022, submitted to ONR, Arlington, VA, July (1988).

35. B. R. Lanning, P.O. Campbell, J. D. Seitz, G.R. Edwards, and D.L. Olson, "Infiltration Kinetics of Al SiC Composites", Colorado School of Mines Report MT CWR 088 009, March (1988).

36. D.K. Matlock and D.L. Olson, "The Role of Composition and Microstructure Gradients on Weld Metal Properties and Behavior, Progress Report DOE/ER/45308 1 and CSM MT CWR 088 003, January (1988); Progress Report DOE/ER/450308 2, January (1989); DOE/ER/45308 3 and MT CWR 089 041, November (1989).

37. R. Zak and D. L. Olson (Coordinating and Editing), "CSM Research Thrusts (Research Brochure)", (1989).

38. G.R. Edwards and D. L. Olson, "Low Temperature Solid State Bonding", CSM Final Report, MT CWR 090 009, submitted to ONR, Arlington, VA, March (1990).

39. G.R. Edwards and D. L. Olson, "Fundamental Concepts of Wettability and Interfacial Bond Strength in Aluminum Matrix SiC Reinforced Composites", CSM Report, MT CWR 090 012, submitted to ONR, Arlington, VA, July (1990).

40. D. L. Olson and S. Liu, "The Influence of Weld Metal Microalloy Additions to Extend the Heat Input Range for the Submerged Arc Welding of HY130 Steel", CSM Report MT-CWR-090-027, submitted to ONR and DTRC, December 31 (1990).

41. J.J. Moore, B. Mishra, and D. L. Olson, "Combustion Synthesis of Intermetallic and Ceramic Materials and Its Application to the Synthesis of Gallium Salt Scrub Reduction Alloys", CSM Report MT-EXT-090-026, submitted to EG&G Rocky Flats Plant, December (1990).

42. D. L. Olson and S. Liu, "Review of Capillarity Driven Methods to Measure Surface Diffusion", presented at Scanning Microscopy/1990 Conference, Bethesda, MD, CSM-CWR-090-024, May 8 (1990).

43. D.K. Matlock and D. L. Olson, "Novel Concepts in Weld Metal Science: Role of Gradients and Composite Structure", DOE/ER/45308-4 (MT-CWR-091-005), February (1991); DOE/ER/45308-5 (MT-CWR-091-024), November 1991.

44. S. Al-Hassan, B. Mishra, and D. L. Olson, "Corrosion of Steel in an Aqueous Environment Containing Carbon Dioxide", MT-CWR-091-012, submitted to Conoco Research, Ponca City, OK, June (1991).

45. D.L. Olson and G.R. Edwards, "Workshop Report: Advanced Welding Science for DOD Applications", MT-CWR-091-011, submitted to ARO, Research Triangle Park, N.C., June (1991).

46. D.L. Olson, "Consumables", Summary Report of the Welding Science Workshop, August 16-17, 1990, Jackson Hole, WY, pp. 10-11, DOE Conf. Report CONF-9008201 (1991).

47. G.R. Edwards and D. L. Olson, Annual Report: "Wettability and Infiltration Kinetics in Metal Matrix Composites", MT-CWR-091-015, submitted to Office of Naval Research, Arlington, VA (1991).

48. D. L. Olson, "Educational Needs of the Precision Joining Center", Section 2.6, pp. 11-12 and Appendix G, EG&G Report "Workshop Report - Precision Joining Center", submitted by J.W. Powell and D.A. Westphal, Breckenridge, Colorado (July 10-12, 1991), August (1991).

49. D.K. Matlock and D. L. Olson, "Novel Concepts in Weld Metal Metal Science: Role of Gradients and Composite Structure", Progress Report MT-CWR-091-024 (DOE/ER/45308-5), November (1991).

50. D. L. Olson, S. Liu, and J.E. Ramirez, "The Influence of Weld Metal Microalloy Additions to Extend the Heat Input Range for the Submerged Arc Welding of HY130 Steel", submitted to ONR, CSM Report MT-CWR-092-008, January (1992).

51. D. L. Olson, S. Liu, G.R. Edwards, and A. O. Kluken, "Predictive Models for High Strength HAZ Microstructure and Properties, CSM Report MT-CWR-092-009, January (1992).

52. P. Ferro, B. Mishra, D. L. Olson, and J.J. Moore, "Electro-Winning of Calcium", CSM. MT/EXT/092/002, submitted to Rocky Flats Plant, January 1992.

53. A. Raraz, B. Mishra, D. L. Olson, and J.J. Moore, "Electro-Refining of Cerium: Part I: Evaluation of Crucible Configuration and Components", CSM, MT/EXT/092/001, submitted to Rocky Flats Plant, January 1992.

54. A. Raraz, B. Mishra, D. L. Olson, and J. J. Moore, "Electro-Refining of Cerium: Part II: Cerium as a Surrogate for Plutonium Electrorefining Studies", CSM, MT/EXT/092/010, submitted to Rocky Flats Plant, January 1992.

55. B. Mishra and D. L. Olson, "Optimization of Components and Processes for Cerium Electrorefining", submitted to Rocky Flats Plant, May 1991.

56. P. Ferro, B. Mishra, J. J. Moore, and D. L. Olson, "Electrowinning of Calcium from Ca0-CaCl2 Salt-System, CSM, MT/EXT/090/025, submitted to Rocky Flats Plant, December 1990.

57. D. L. Olson, S. Liu, G.R. Edwards, and D. K. Matlock, "Non-Equilibrium Behavior of Weld Metal in Flux-Related Processes", CSM, MT-CWJR-092-019, submitted to IIW Commission IXJ, Document IX-l685-92, Annual Assembly, Madrid, Spain (September 1992).

58. S. R. Pritchett, J.J. Moore, B. Mishra, and D. L. Olson, "Synthesis and Characterization of Salt Scrub Alloys", CSM, MT/EXT/092/02, submitted to EG & G Rocky Flats, July 25 (1992).

59. G. R. Edwards and D. L. Olson, "Infiltration Kinetics and Interfacial Bond Strength of Metal Matrix Composites", CSM Report #MT-CWR-092-028, submitted to ONR, July 1992.

60. R. H. Frost and D. L. Olson, "The Pyrometallurgical, Physical, and Mechanical Behavior of Weldments", Final Report DAAL03-89-K-0091, CSM Report #MT-CWR-092-034, submitted to Army Research Office, August 1992.

61. D. L. Olson, S. Liu, and J.E. Ramirez, "The Influence of Weld Metal Microalloy Additions to Extend the Heat Input Range for the Submerged Arc Welding of HY-130 Steel", CSM Report No. MT-CWR-092-008, submitted to ONR and DTRC, January (1992).

62. A. O. Kluken, D. L. Olson, S. Liu, and G. R. Edwards, "Predictive Models for High Strength Steel HAZ Microstructures and Properties", CSM Report No. MT-CWR-092-009, January (1992).

63. D. K. Matlock and D. L. Olson, "Novel Concepts in Weld Science: Role of Gradients and Composite Structure", CSM Report No. MT-CWR-092-023 (DOE/ER/45308-6), August 31 (1992).

64. S. Liu, D. L. Olson, and F. C. Liao, "Weldability of Nitrogen-Enhanced Titanium-Vanadium Steels", Report CSM-CWR-092-037, November 15, (1992).

65. S. Govindarajan, K. A. Monroe, B. Mishra, J. J. Moore, and D. L. Olson, "The Protection of Molybdenum Electrodes Against Oxidation/Corrosion in Glass Melting Furnaces", Literature Review, submitted to Schott Glaswerke, CSM Report, MT-EXT-092-038, December (1992).

66. G. Govindarajan, K. A. Monroe, J. J. Moore, D. L. Olson, and B. Mishra, "The Protection of Molybdenum Electrodes Against Oxidation/Corrosion in Glass Melting Furnace", Progress Report - January 1 to December 1, 1992, submitted to Schott Glaswerke, CSM Report, MT-EXT-092-039 (1992).

67. D. L. Olson, G. R. Edwards, and B. Mishra, "The Chemical Constitution of Welding Consumables", CSM Report MT-CWR-092-040, December (1992).

68. J. J. Moore and D. L. Olson, "Undergraduate Materials Design at Colorado School of Mines", CSM Report MT-EDU-093-001, presented at TMS Annual Meeting, Denver, Colorado, February (1993).

69. S. Liu, D. L. Olson, and J .E. Ramirez, "The Influence of Weld Metal Alloying Additions to Extend the Heat Input Range for the Submerged Arc Welding of High Strength Steels", CSM Report MT-CWR-093-002, submitted to ONR, January 11 (1993).

70. D. L. Olson, S. Liu, and D. A. Fleming, "Welding Flux: Nature and Behavior", CSM Report MT-CWR-093-001, submitted to NSRP-SP7 Panel, Peterson Builders, Inc., January (1993).

71. B. Mishra, J. J. Moore, and D. L. Olson, "Demonstration and Technology Transfer of Salt Scrub Reduction with Synthesized Intermetallic Alloys", CSM Report, MT/EXT/093/008, Project Report, submitted to Plutonium Recovery Technology, EG&G Rocky Flats, Inc., February (1993).

72. J. J. Moore and D. L. Olson, "Materials Science Program - Annual Report, January 1, 1992-December 31, 1992, CSM Report ML-093-001, (February 17, 1993).

73. G. R. Edwards and D. L. Olson, "Wettability and Reaction Kinetics in Metal Matrix Composites", Annual Report, CSM Report No. MT-CWR-093-019, pp. 1-57 (1993).

74. S. Liu, D. L. Olson, and M. Onsoien, "Use of Selected Shielding Gas Composition to Achieve Optimum Weld Properties", CSM Report No. MT-CWR-093-020, pp. 2-56, submitted to AMOCO Corporation Research, Naperville, IL, and AGA AB, Lindingo, Sweden (August 11, 1993).

75. P. D. Ferro, D. L. Olson, B. Mishra, and J. J. Moore, "Application of a Porous Diaphragm in a Calcium Electrowinning Cell", CSM Report No. MT-CWR-094-001, pp. 1-180, submitted to EG&G Rocky Flats, January (1994).

76. D. K. Matlock and D. L. Olson, "Novel Concepts in Weld Science: Role of Gradients and Composite Structure", Final Report to U.S. DOE-BES Division, CSM Report No. MT-CWR-094-013, February 28, 1994.

77. D. L. Olson, S. Liu, R.H. Frost, G. R. Edwards, and D. L. Fleming, "Welding Flux: Nature and Behavior", OMAE 1994 Workshop: Steel and Weldments for the Offshore Structures; Testing Data Analysis, March 3rd, Houston, TX (1994).

78. J. J. Moore, D. L. Olson, and P. Beaumont, "Materials Science Program - Annual Report, January 1, 1993 to December 31, 1993", CSM Report No. ML-094-0001, April 5 (1994).

79. B. Mishra, D. L. Olson, and J. J. Moore, "Behavior of RCRA Constituents in Pyrochemical Residual Processing", Project Report, CSM Report No. MT/EXT/094-018, submitted to EG&G Rocky Flats, Inc., Golden, Colorado (1994).

80. D. A. Fleming, S. Liu, and D. L. Olson, "Final Report: Development of a Shielded Metal Arc Welding Consumable for HSLA-100 Plate Steel", CSM Report MT-SRC-094-017, submitted to Peterson Builders, Inc.; SP-7 Project, U.S. Navy, April (1994).

81. B. Mishra, D .L. Olson, and A. Raraz, "Optimization of Plutonium Electrorefining Through Modeling and Model Materials", CSM Report MT/EXT/094-025, submitted to EG&G Rocky Flats, Inc., July (1994).

82. B. Mishra, D. L. Olson, and S. J. Al-Hassan, "Environmental and Microstructural Effects on Corrosion of Linepipe Steels in CO2-Containing Solutions", CSM Report MT/CWR/094/026, submitted to Conoco Inc., Production Technology, Ponca City, OK, August (1994).

83. D. A. Fleming, S. Liu, and D. L. Olson, "Development of a Shielded Metal Arc Welding Consumable for HSLA-100 Plate Steel", Final Report: CSM Report MT-CWR-094-017, submitted to U.S. Navy SP-7 Program, April (1994).

84. G. R. Edwards and D. L. Olson, "Infiltration Kinetics and Interfacial Bond Strength of Metal Matrix Composites", Final Report, CSM Report MT-CWR-094-036, submitted to ONR, Arlington, Virginia, September (1994).

85. Howard Woodward, News Editor, "Spotlight on AWS Fellows: David Olson", Welding Journal, 73 (11), pp. 107 (1994).

86. Andrew Cullison (Conference Reporter), "Technology Barriers and Opportunities: Presentation by D. L. Olson", Henniker 94: A Strategic Vision for Materials Joining, Welding Journal 73 (11), pp. 59-60 (1994).

87. S. Liu, D. L. Olson, and C. Johnson, "Joint Industry Underwater Welding Consumables Development Program (CSM Activities)" Final Report, CSM Report MT-CWR-094-038, submitted to JIP-Tech. Act. Committee, Global Divers, Inc., Lafayette, LA, November (1994).

88. A. Raraz, B. Mishra, and D. L. Olson, "Chemical Reaction of Leaded-Rubber Gloves with Nitric Acid", CSM Report: MT-EXT-094-030, submitted to EG&G Rocky Flats, November (1994).

89. B. Mishra, D. L. Olson, J. J. Moore, and A.. Raraz, "Advanced Technologies for Reconversion of Radioactively-Contaminated Scrap Metals [RCSM] to High-Value Intermediate and Final Products", Project Report (Phase I), CSM Report MT-EXT-095-007, submitted to Manufacturing Sciences Corporation, pp. 1-17, March (1995).

90. B. Mishra, D. L. Olson, and D. Fazzina, "In-Process Reaction-Formed Hardfacing Materials", CSM Report MT-EXT-095-008 (Confidential Report), Project Report (Phase I), submitted to Paul A. Kammer, Castolin-Societe Anongme, Switzerland, March (1995).

91. D. L. Olson and R. H. Frost, "Exothermically Assisted Arc Welding", ARO Report on Selected Scientific Accomplishments 1994-1995, U.S. Army Research Office, Materials Science Division, May 16, 1995, Research Triangle Park, NC (1995).

92. G. R. Edwards, D. L. Olson, S. Liu, and P. R. Chidambaram, "Flexible Laser Automated Intelligent Research System for Manufacturing and Fabrication (Laser-Materials Interaction)", CSM Report MT-CWJCR-095-024, submitted to AWS, Miami, Florida, for period February 28 1995 to September 30, 1995, October (1995).

93. D. L. Olson and B. Mishra, "Survey of Technology to Select Refractory for Melting and Casting of IN825 and SS316L Alloys", CSM Project Report MT/EXT/095/027, submiited to Dr. A. L. Liby, Manufacturing Sciences Corporation, Oak Ridge, TN, Task No: 2.4.2.3.2 (for period June 1 - Sept. 30, 1995), October (1995).

94. D. L. Olson, B. Mishra, and J. Weeder, "Development of Hardfacing Consumables", (Performance Period: May 1 - Sept. 30, 1995), Project Report MT/CWJCR/095/026, submitted to Mr. Paul A. Kammer, Castolin Societe Anoyme, Laussane, Switzerland, October (1995).

95. D. L. Olson and R. H. Frost, "Pyrometallurgical, Physical and Mechanical Behavior of Weldments", Final Report, MT-CWJCR-096-004, submitted to U.S. Army Research Office, Research Triangle Park, NC, January 31 (1996).

96. D. L. Olson, B. Mishra, and J. Weeder, "Development of Hardfacing Consumables", Project Report, for Performance Period: 10.1.95-3.31.96, CSM Report MT/CWJR/096-010, submitted to Mr. Paul A. Kammer, Castoline Societe Anoyme, Laussane, Switzerland, April (1996).

97. K. A. Lindahl, D. L. Olson, J. J. Moore, and B. Mishra, "Quantitative Investigation of Copper/Indium Multilayer Thin Film Reactions", CSM Report MT-CWJCR-096-024, submitted to Dr. Bruce Lanning, Lockheed-Martin Aerospace, Denver, Colorado, August (1996).

98. G. R. Edwards, D. L. Olson, and S. Liu, "Flexible Laser Automated Intelligent Research System for Manufacturing and Fabrication", CSM Report MT-CWJCR-096-028, submitted to the American Welding Society, Miami, FL (for DARPA), October (1996).

99. B. Mishra and D. L. Olson, "Advanced Technologies for Reconversion of Radioactively-Contaminated Scrap Metals (RCMS) to High-Value Intermediate and Final Products", submitted to Manufacturing Science Corporation, MT/EXT/096-015, August (1996).

100. A .G. Raraz, B. Mishra, and D. L. Olson, "Washing Technologies for Removing Cyanide Contamination from Low Level Mixed Wastes", submitted to RFETS, Rocky Flats, Golden, Colorado, August (1996).

101. D. L. Olson (Focus Officer), "Hydrogen Management of High Strength Steel Weldments for Defense Applications", Operating Assignment Summary, PTPI-013, pp. 34-35, TTCP-PTP-1 Annual Report 1996, The Technical Cooperation Program, Subcommittee on Non-Atomic Military Research and Development, Subgroup P - Materials Technology, Technical Panel 1 - Metals Technology and Peformance, Chairman A. Crowsan, Army Research Office, Research Triangle Park, NC (1996).

102. D. L. Olson, J. L. Davidson, and B F. Dixon, "Hydrogen and Preheat Management in Welded High Strength Steels for Defense Applications" (TTCP Workshop and Joint Seminar), Final Report, CSM Report MT-CWJCR-097-008, submitted to the U.S. Army Research Office, Research Triangle Park, NC (1997).

103. B. Mishra, D. L. Olson, and A .G. Raraz, "Performance of Refractory Metals and Alloys in Molten LiCl/Li20/Li/Li3N Salt System at 725oC", CSM Report MT/EXT/097/012, Interim Project Report, submitted to Dr. Chris Eberle, Argonne National Laboratory-West, Idaho Falls, ID, July (1997).

104. B. Mishra, D. L. Olson, S. Benjamin, "Performance of Refractory Metals and Alloys in Molten LiCl/Li/Li3N Salt System at 725oC", Final Report, CSM Project 4-41707, CSM Report MT/EXT/097-018, submitted to Argonne National Laboratory - West (Dr. Cris Eberle), Idaho Falls, ID, August (1997).

105. S. Liu, R. Chapin III, and D. L. Olson, "Gas Tungsten Arc Welding Electrode Research, Part 1: Characterization of Pure Tungsten, Tungsten-Thoriated, Tungsten-Lanthanated, and Tungsten-Ceriated Electrodes", Research Period: February 1996-November 1997, Final Report, CSM Report No. MT-CWJCR-097-026, submitted to Dr. Steven Caldwell, Teledyne Advanced Materials, La Vergue, TN, December (1997).

106. D. L. Olson, "Commission IV Annual Report", Delegate Report, 50th IIW Annual Assembly, San Francisco, CA, pp. 16-18, American Council, AWS, Miami, FL (1997).

107. D. L. Olson, "High Strength Weldment Reliability: Weld Metal Hydrogen Trapping", CSM Report MT-CWJCR-098-008, Final Report on Contract DAAH04-94-G-0281, submitted to U.S. Army Research Office, Research Triangle Park, NC, February (1998).

108. I. Maroef, D. L. Olson, M. Eberhart, G. R. Edwards, and C. Lensing, "Weld Metal Hydrogen Trapping", submitted as pre-publication to U.S. Army Research Office, Report No. MT-CWJCR-098-001 (1998).

109. S. Benjamin, B. Mishra, and D. L. Olson, "Advanced Technologies for Reconversion of Radioactively Contaminated Scrap Metal (RCSM) to High-Value Intermediate and Final Products", submitted to Valerie McNair, Manufacturing Sciences Corporation, CSM Report No. MT-EXT-098-012, Oak Ridge, TN, May (1998).

110. D. L. Olson and R H. Frost, "The Effect of Welding Consumables on Arc Welding Process Control and Weld Metal Structure and Properties", Final Progress Report, Report No. MT-CWJCR-098-014, Contract No. DAAH04-95-1-0135, submitted to U.S. Army Research Office, Research Triangle Park, NC, June (1998).

111. G. R. Edwards, D. L. Olson, and S. Liu, "High Strength Steel Welding Research", CSM Final Report MT-CWJCR-098-024, ONR Contract N00014-94-1-0694, submitted to Dr. George Yoder, ONR, Arlington, VA, August (1998).

112. D. L. Olson, "Commission IV Annual Report", IIW Annual Meeting, Hamburg, Germany, September (1998), submitted to the American Council of IIW, AWS, Miami, FL.

113. C. A. Lensing, G. G. W. Mustoe, and D. L. Olson, "Design and Testing of an Aliquot Mold for Casting Reactive Metals", CSM Report MT-ACSE-098-030, Progress Report, submitted to K. Axler, Los Alamos National Laboratory, December 15 (1998).

114. B. Mishra and D. L. Olson, "Final Report on Training Courses to Rocky Flats Safe Sites Program, submitted to RFETS, July 1998.

115. B. Mishra, S. Benjamin, and D. L. Olson, "Advanced Technologies for Reconversion of Radioactively-Contaminated Scrap Metals [RCSM] to High-Value Intermediate and Final Products, submitted to Manufacturing Science Corporation, August (1998).

116. I. Maroef, C. Lensing, and D. L. Olson, "Hydrogen Trapping in Metallic Materials", Proceedings of Workshop on Hydrides and Hydrogen Storage, pp. 183-209, The Technical Corporation Program, Report MAT-TPI/9/988, National Research Council, Ottawa, Canadian Defense Research Establishment Atlantic, Victoria, BC, Canada, September 11 (1998).

117. D. L. Olson, The Technical Corporation Programme, Report MAT-TP-1/8/98, Ref. No. MAT-TP1-0-22, "Life Cycle Cost Reduction for Welded High Strength Steel Construction", Annual Report 1998, pp. F-16B, TTCP (1999).

118. D.L. Olson, The Technical Corporation Programme, Report MAT-TP1-013, "Hydrogen Management in High Strength Steel Weldments for Defense Applications", Annual Report 1998, pp. F-1 to F-2, TTCP (1999).

119. D. L. Olson, Final Report, "Hydrogen and Preheat Management in Welded High Strength Steel for Defense Applications", CSM Report No. MT-CWJCR-099-023, submitted to TTCP Panel, U.S. Army Research Office, Research Triangle Park, NC, July 15, 1999.

120. D. L. Olson, T. R. Wildeman, and R. D. Smith II, "Methods for the Determination of Hydrogen Distributions in High Strength Steel Weldments", CSM Report No. CSM-MT-CWJCR-000-015, submitted to U.S. Army Research Office, Research Triangle Park, NC, July 21, 2000.

121. I. Maroef, Y. D. Park, and D. L. Olson, "Feasibility of Thermite Sparking with Impact of Aluminum onto Rusted Steel", CSM Report MT-CWJCR-000-020, Final Progress Report, submitted to Dr. John S. Spencer, American Bureau of Shipping and to Dr. Charles E. Smith, U.S. Department of Interior, Mineral Management Service, December (2000).

122. D. E. Dooley, D. L. Olson, G. R. Edwards, and F .E. Gibbs, "Development of an Electronic Phase Diagram and the Predictions of Plutonium Alloy Phase Stability using Electronic Properties", CSM Report No. MT-CWJCR-000-019, LANL Report No. LA-UR-00-5970, submitted to Los Alamos National Laboratory, Progress Report on Contract H1801-0019-2G, October 2000.

123. G. E. Cook, S. A. David, F. G. Armao, and D. L. Olson, "Electrical Energy Assessment of Welding Operations for Puget Sound Naval Shipyard FY2000, Report Submitted to Oak Ridge National Laboratory, pp. 1-51, June 8 (2001).

124. D. L. Olson and T. R. Ohno, Hall and Seebeck Measurement System for the Evaluation of Alloy Phase Stability, Microstructures and Properties", CSM Report #MT-CWJCR-001-020, submitted to U.S. Army Research Office, Research Triangle Park, NC, September 12 (2001).

125. D. L. Olson, "High Strength Steel Weldment Reliability", Final Report, CSM Report # MT-CWJCR-001-
022, submitted to U. S. Army Research Office , Research Triangle Park, NC, November 14, 2001.

126. D. L. Olson, "New Welding Consumables and Practices for Highly Portable Field Repair", Final Report, CSM Report # MT-CWJCR-001-024, Submitted to U. S. Army Research Office, Research Triangle Park, NC, December 20, (2001).

127. I. S. Maroef and D. L. Olson, "Metallurgical Analysis of the Damage Sustained by the M. V. Castor", Final Report: CSM Report # MT-CWJCR-001-301, Submitted to Dr. Jack Spencer, 16855 Northchase Drive, Houston, TX, 77060, November 1 (2001).

128. I. S. Maroef, Z. V. Smith, and D. L. Olson, " Feasibility of Thermite Sparking with Impact of Rusted Steel onto Aluminum Coated Steel", Progress Report, CSM Report # MT-CWJCR-001-025, Submitted to ABS, Houston, TX, December (2001).

129. R. A. Sielski, D. L. Olson, D. W. Craig, M. A. Dyer, D. P. Hunt, B. Woodruff, and W. J. Couch," Submarine Rescue Chamber/ Hold-down Installation via Underwater Friction Stud Welding Using Atmospheric Diving Systems, Project SBIR, Topic N02-027, Phase I Report, B and B Engineering, 78349 Kistler Way, Palm Desert, California, 92211, submitted to U. S. Navy Special Warfare, Diving PMS 395, Naval Sea Systems Command, Navy Yard, Washington DC, December 22, 2002.

130. David L. Olson, B. Mishra, I. S. Maroef, W. M. Drake, and G. Atkins, Assessment of Weldability in Beralcast 363 Alloy, Progress Report, CSM Report# MT-CWJCR -002-019, submitted to Mr. Steve N. Hammond, Rolls-Royce Corporation, P. O. Box 920, Indianapolis, IN, 46241 ( September, 2002).

131. T. A. Siewert, C. N. McCowan, R. A.. Bushey, J. Doherty, T. Christ, D. J. Kotecki, D. L.
Olson, L. W. Myers, Jr., E. Hinshaw and S. Kiser, "Weld Repair of the U. S. Capitol Dome, Report to the Architect of the U.S. Capitol, November (2002).

132. I. S. Maroef, Y. D. Park, and D. L. Olson, "Feasiblity of Thermite Sparking on Impact of Rusted Steel onto Aluminum Coated Steel , CSM Final Report MT-CWJCR-002-024, submitted to Dr. Charles E. Smith (MMS)/ Dr. Jack Spencer (ABS Tech.), December 31, 2002.

133. D. L. Olson, I. S. Maroef, G. J. Atkins and T. Sweitzer, CHMM, "Assessment of Weldability in Beralcast 363 Alloy", Final Report, CSM Report # MT-CWJCR-003-008, submitted to Rolls-Royce Corporation, to Steve N. Hammond, Indianapolis, IN 46241, January 30, 2003.

134. A. N. Lasseigne, Y. D. Park, V. I. Kaydanov, and D. L.Olson, Thermoelectric Diagnostics for Nondestructive Evaluation, I. I. W. Document II-A-123-03 Presentation, 24 slides, presented by T.Boellinghaus, BAM, Berlin, 2003 Annual Assembly, Bucharest, Romania, July 6-11 (2003).

135. Sittha Saidarasamoot, David L. Olson, and Brajendra Mishra, "Assessing Advances in Promising Nondestructive Methods for Detection and Measurement of Corrosion Wastage", ABS Technical Report RD 2003-08, ABS Technology, 16855 Northchase Drive, Houston, TX 77060, (30 June 2003).

136. D. L Olson, K. L. Jones and A. N. Lasseigne, "Transcending Degree Programs", 2003 Faculty Senate Distinguishing Lecture, 25 February 2004, Green Center, CSM, Golden, Colorado. CSM Report MT-004-009, April 7, (2004).

137. D. L. Olson, S. Liu, G. Aktins, A. Lasseigne and Y. D. Park, "TTCP Workshop on Hydrogen Management in Structural Steel Weld Repair for Extended Life and Other Welding Topics", Proceedings and Final Report on Workshop, CSM Report MT-CWJCR-004-014, May 25-26, 2004, Colorado School of Mines, Golden, CO, June 16, 2004.

138. Francisco Sanchez, Brajendra Mishra and David L. Olson, "An Assessment of Magnetization Effects on Hydrogen Cracking for Thick Walled Pipelines", MMS-OPS Project Progress Report, CSM Report No. CSM/ MT/ CWJCR/2004/008,submitted to MMS, April (2004).

139. Francisco Sanchez, Yeong-do Park, Angelique Lasseigne, David L. Olson, and Brajendra Mishra, "An Assessment of Magnetization Effects on Hydrogen Cracking for Thick Walled Pipelines", MMS- OPS Progress Report, CSM Report CSM/MT/CWJCR/2004/009, submitted to MMS., November (2004).

140. C. Salmon, R. King., B. Mishra and D. L. Olson, " Beryllium Air Monitor Research and Development: Year 2005 Report", CSM Report MT-MME-005-008, Submitted to Kaiser-Hill, Rocky Flats Environment Technology Site, Also Susan Weber , Environmental Management, Office of Technical Program Integration, U. S. Dept. of Energy, Germantown, Maryland (December 8, 2005) , Golden ,Colorado.

141. Brajendra Mishra, David L. Olson and Francisco Sanchez, "An Assessment of Magnetization Effects on Hydrogen Cracking for Thick Walled Pipeline", CSM Final Report CSM/MT/ CWJCR/ 2005/ 009, MMS Contract Number: 0103PO73498, Submitted To Michael Else, Engineering And Research Branch, 381 Eldon Street, MS 4021, Herndon, VA 201170-4817, December 2005.

142. D. L. Olson, B. Mishra, and J. H. Kleebe, " Molten Alloy and Salt Deposition Followed by Reaction Synthesis to Produce Advance Mullite and Forsterite Corrosion Barriers for Mo-Si- B Turbine Materials", Year End Report for contract Number: N00014-05-1-0234, submitted to ONR, Arlington, VA, December 30. 2005.

143. D. L. Olson, B. Mishra, and A. N. Lasseigne, "Development of a Non-Destructive, Non-Contact Electromagnetic Sensor for Hydrogen Content Determination in Coated Line Pipe Steel", Progress Report for MMS Contract Number: 1435-01-04-36637, submitted to MMS. Herndon, VA and DOT-OPS, Washington DC, December 28, 2005.

144. J. E. Jackson, A. N. Lasseigne, B. Mishra, and D. L. Olson, "The Influence of High Magnetic and Electric Fields on Hydrogen Content from Aqueous Corrosion Processes in Steel: Possible Mechanistic Interpretations", Research Report # CSM-ACSEL-006-003, Prepared for MMS-OPS NIST Meeting at CSM, January 24, 2006.

145. J.E. Jackson, A. N. Lasseigne, B. Mishra, and D.L. Olson, "The Influence of High Magnetic and Electric Fields on Hydrogen Content from Aqueous Corrosion Processes in Steel: Possible Mechanistic Interpretations", Colorado School of Mines Research Report CSM-ACSEL-006-003, Prepared for MMS- OPS-NIST Pipeline Research Meeting at CSM, January. 24, (2006).

146. D. S. Tordonato, D. L. Olson, and B. Mishra, "ABS Database of Corrosion Wasteage for Double Hull Tankers", Technical Report, CSM Report # MT-CWJCR-006-004, submitted to ABS, Houston, TX, July (2006).

147. D. L. Olson, B. Mishra, K. M. Evans, D. E. Dooley, A. N. Lasseigne-Jackson, J.E .Jackson, C. Sangphagdee, Y. D. Park, and C. A. VanHorn, "Thermoelectric Power Nondestructive Analysis for Nuclear Materials Applications ", NNSA POSTER, Washington D. C. October 11, 2006.

148. J. E. Jackson, A. N. Lasseigne-Jackson, B. Mishra, D. L. Olson, C. M. Jensen, M. Kuba and S. A. Imam, "Fuel Sensors for Reversible Battery Hydrogen Storage Materials", TMS 2007, Poster. Orlando, FL. (February 27, 2007).

149. D.L. Olson, B. Mishra, A.N. Lasseigne-Jackson, M.S. Heilig, C. Ellis, C. Nguyen, R. Jones, and G. Garner, "Development of Advanced Austenitic Stainless Steels for Down-hole Applications", CSM Report # MT-CWJCR-007-002 (2007).

149. D. L. Olson, B. Mishra, K. M. Evans, D. E. Dooley, A. N. Lasseigne-Jackson, J.E. Jackson, C. Sangphagdee, Y. D. Park, and C. A. VanHorn, "Thermoelectric Power Non Destructive Analysis for Material Applications", TMS 2007, Poster, Orlando, February 27 (2007) Orlando, FL. (Feb. 2007).

150. J.E. Jackson, A. N. Lasseigne, B. Mishra, and D.L. Olson, "The Influence of High Magnetic and Electric Fields on Hydrogen Content from Aqueous Corrosion Processes in Steel: Possible Mechanistic Interpretations", Colorado School of Mines Research Report CSM-ACSEL-006-003, Prepared for MMS-OPS-NIST Pipeline Research Meeting at CSM, Jan. 24, 2006 (2006).

151. J.E. Jackson, A.N. Lasseigne-Jackson, B. Mishra, D.L. Olson, C.M. Jensen, M. Kuba, and S.A. Imam, "Fuel Sensors for Reversible Battery Hydrogen Storage Materials", Poster: Materials Processing and Manufacture Division at TMS 2007 Conference, February 27, 2007, Orlando, FL.

152 D. L. Olson, B. Mishra, A.N. Lasseigne-Jackson, M.S. Heilig, C. Ellis, C. Nguyen, R. Jones, and G. Garner, "Development of Advanced Austenitic Stainless Steels for Down-hole Applications", CSM Report # MT-CWJCR-007-002 (2007).

 

Thesis Advisory for the Following Completed Ph.D. Theses

Alan L. Liby (1974), T 1715, "Metallurgical Control of Electroslag Welds"

Alfredo Marquez Davila (1978), T 2059, "The Effect of Manganese and Nickel Additions in the Welding Flux on the Fusion Zone of Pearlitic Ductile Iron"

Jerald E. Jones (1979), T 2237, "Investigation of the Thermal and Metallurgical Characteristics of Non Vertical Electroslag Welds"

Richard J. Erfurdt (1979), T 2220, "An Investigation of the Effect of Iron Content on the Homogenization Response of Plutonium 1 wt pct Gallium Alloy"

Frank Thomas Zurey (1979), T 2025, "Stabilization of the Plutonium Delta Phase in the Plutonium Gallium Zirconium Ternary Phase Equilibrium System"

Wendel G. Brown (1979), T 2230, "The Infiltration of Silicon in Silicon Carbide Carbon Compacts"

Robert H. Frost (1980), T 2395, "The Influence of Electrochemical Reactions on the Chemistry of the Electroslag Welding Process"

Jorge Ernesto Indacochea (1981), T 2511, "Effect of the Manganese Silicate Base Submerged Arc Welding Flux Composition on the Weld Metal Composition and Microstructure"

Peter Alan Steinmeyer (1982), T 2504, "Ferrite Layer Formation on Type 304L Stainless Steel during Exposure to Liquid Lithium"

Stephen Liu K. Chuen (1984), T 2923, "The Role Non Metallic Inclusions in Controlling Weld Metal Microstructures in Niobium Microalloyed Steels"

John Randolph Roper (1985), T 3020, "Minor Element Effects in Gas Tungsten Arc Weld Penetration of Stainless Steels"

Carl E. Cross (1986), T 2951, "Weldability of Aluminum Lithium Alloys: An Investigation of Hot Tearing Mechanisms"

Craig B. Dallam (1986), T 3293, "The Effect of Stress on the Weld Metal Acicular Ferrite Phase Transformation"

Mohan Swaroop Misra (1986), T 3303, "A Mechanistic Model for the Grain Refinement in Multiple Pass Welds as a Function of Microalloying Additions"

Joel A. Self (1987), T 3144, "Effects of Composition Upon the Martensitic Transformation Temperature of Austenitic Steel Weldments"

Bernard Frank Carpenter (1989), T 3557, "New PHACOMP of the Phase Stability of Fe Al Cr Mn Ni Weld Metals"

Roger A. Nichting (1989), T 3697, "An Investigation of Time Temperature Dependent Deformation Behavior in Low Temperature Solid State Bonding of Copper"

Christopher W. Ramsay (1989), T 3391, "The Influence of Oxygen and Non Metallic Inclusions on High Strength Steel Weld Metal Microstructures and Properties"

Jesus David Olivas (1989), T 3727, "Model for Estimation of Ultimate Bond Energies of Solid State Bonded Dissimilar Metals"

Abdul Wahid (1992), T-4241, "Cracking Behavior of Chemically Nonhomogenized Alloys"

Dong Won Oh (1992), T-4065, "Use of Surrogate Additions to Achieve Mechanistic Understanding of the Role of Titanium and Boron Contents on the Formation of Acicular Ferrite in Steel Weld Metal"

Patrick Dunn Ferro (1993), T-4539, "Application of a Porous Diaphragm in a Calcium Electrowinning Cell"

Kirk Arthur Lindahl (1996), "Quantitative Investigation of Copper/Indium Multilayer Thin Film Reactions".

Miguel A. Contreras (1996), "Thin-Film Polycrystalline Cu-In-Ga-Se for Photovoltaic Applications".

Frank Edward Gibbs (1998), "Development of a Physical Surrogate for the Plutonium-1 wt. pct. Gallium Alloy".

Inam Soerjadarma Maroef (1999), "Fundamental Study of Hydrogen Trapping in Steel Weld Metal".

Hannah Jean Moore (1999), "Elucidation of Reaction Mechanisms of Binary and Ternary Multilayer Thin Films with Quaternary Copper, Indium, Gallium, and Selenium Systems".

Rodney Davis Smith II (1999), "Method for the Determination of Hydrogen Distribution in High Strength Steel" (with Professor Thomas R. Wildeman), Applied Chemistry.

Stephen Henry Malene (2000), T-5370, "Response of Exothermic Additions to the Flux-Cored Arc Welding Consumable Electrode"

Chad Anthony Lensing (2001), "The Ultilization of Yttrium Hydrogen Trap and Welding Parameters in Managing Hydrogen Content in Welding High Strength Low Alloy (HSLA) Steel"

Yeong-Do Park (2003)," Use of Thermoelectric Power (TEP) to Assess Metallurgical Behavior"

Preecha Termsuksawad (2003), "A Fundamental Investigation of Hydrogen Absorption in AB5 Type Hydrogen Storage Materials and its Characterization by Magnetic and Electric Techniques" (Co-advised with Professor B. Mishra).

Saisamorn Niyomsoan (2003), Assessment of AB2-Type Hydrogen Storage Using Thermoelectric Power and Magnetic Measurements with Materials Science Concepts" (Co-advised with B. Mishra)

David E. Dooley (2003), T-5834, "Dependence of Electronic Properties on the Degree of Homogenization in Cerium-Lanthanum Alloys".

Angelique Nicole Lasseigne (2006) T-6139, "Development of Thermoelectric Power and Electromagnetic Techniques for Determination of Interstitials in Advanced Materials".

Chumni Sangphagdee (2006), T-6178, "Torsional Fatigued specimens Simulating Ageing of Neutron Irradiated Type 316 Stainless Steel Assess by Thermoelectric Power Probe, Thermal Analysis, and Transmission Electron Microscopy.

Debbie Pacas Johnson (2007), T-6237, "Early Stage Uranium Oxide Development: Kinetic Expressions and Mechanism",


Thesis Advisor to the Following M.S. Theses

George A. Minick (1974), T 1647, "The Effect of Columbium Additions in Austenitic Stainless Steel Castings to Inhibit Intergranular Corrosion"

Kenneth P. Ferrera (1974), T 1668, "Investigation of Mn0, Si02 and Ca0 as a Welding Flux"

Richard Alan Patterson (1974), T 1684, "Liquid Lithium Corrosion of Type 304L Stainless Steel"

John Alen Reeves, Jr. (1974), T 1703, "Liquid Lithium Corrosion of Nitrided 304L Stainless Steel"

Carroll Joseph Long (1974), T 1705, "Effects of Mixture of Carbon Dioxide, Helium and Argon as Shielding Gas in the Gas Metal Arc Welding Process"

Wendel G. Brown (1974), T 1708, "The Effect of Carbon in Reaction Bonded Silicon Carbide"

Bruce Craig (1975), T 1753, "Galvanic Corrosion of a Holiday in an Organic Coated Metal Substrate System"

Lytle Briggs Whitefield III (1975), T 1727, "Grain Boundary Grooving of Pure Iron in Nitrogen Saturated Liquid Lithium"

Richard Johann Schlager (1975), T 1772, "The Corrosion of Type 304L Stainless Steel by Titanium Gettered Liquid Lithium"

Alfredo Marquez Davila (1976), T 1836, "The Effect of Alloying Additions in the Welding Flux on the Graphitization and Moderization of the Fusion Zone in Pearlitic Ductile Iron"

Thomas Allan Whipple (1976), T 1916, "The Creep and Grain Boundary Penetration Behavior of Armco Iron in Liquid Lithium"

John Randolph Roper (1977), T 1881, "Capillarity Effects in the Gas Tungsten Arc Weldability of 21 6 9 Stainless Steel"

Howard E. Janzen (1977), T 1970, "An Investigation of the Si02 Mn0 Ca0/CaF2 Welding Flux System"

Donald D. Schwemmer, Jr. (1977), T 1989, "An Investigation of the Si02 Mn0 Fe0 Welding Flux System"

Gary N. Reser (1977), T 2019, "Predicting the Controlling Mode in the Corrosion of 304L Stainless Steel by Liquid Lithium"

Stan G. Pitman (1978), T-2068, "The Investigation of the Toughness Transition of a C-Mn-Cb Steel for Static and Dynamic Loading Rates"

Enrique L. Carmona N., (1978), T 2123, "Influence of Alkaline Earth and Transition Ion Additions on the Behavior of the Mn0 Si02 Welding Flux System"

Carl Edward Cross (1979), T 2290, "Modification of Eutectic Fusion Zone Microstructure"

Theodore L. Reinhart (1980), T-2238, "An Investigation into the Influences of Alkali Additions to the Manganese Silicate Welding Flux System"

Paul J. Plante (1981), T 2487, "The Corrosion of Alloy A286 and Type 310 Stainless Steel in Liquid Rubidium"

John W. Elmer (1981), T 2520, "The Thermal Expansion Characteristics of Stainless Steel Welds"

John R. Winkel (1982), T 2488, "Compatibility of Selected Alloys with Oxygen Contaminated Liquid Rubidium"

Vicky Turney (1982), T 2546, "The Influence of Welding Parameters and Base Metal Composition on the Bead Morphology of Gas Tungsten Arc Vanadium Welds"

Saleh A. Abdulgader Sed (1983), T 2789, "The Behavior of the Iron Nickel Manganese Copper Consumable System for Welding Ductile Iron"

Craig B. Dallam (1983), T 2799, "Influence of CaF2 Ca0 Si02 Submerged Arc Welding Flux Composition on the Microstructure and Toughness of a Niobium Microalloyed Steel"

Robert Kaichi Okagawa (1984), T 2388, "The Nitrogen Effect on Type 304L Austenitic Stainless Steel Weld Metal Welded with a GTA System Under Ambient and Hyperbaric Conditions"

Patricia Ann Burck (1984), T 2815, "The Effect of a Manganese Silicate Submerged Arc Welding Flux on Weld Metal Composition and Microstructure in AISI 4340 Steel Welds"

Mark Conrad Nordin (1985), T 3036, "The Effects of Yttrium Additions on Grain Refinement and Cracking Susceptibility in Ti 6Al 2Nb 1Ta 0.8Mo Weld Metal"

Bernard Frank Carpenter (1985), T 3118, "A Diagram to Predict Aluminum Passivated Stainless Steel Weld Metal Microstructure"

Paul S. Dunn (1985), T 3093, "Processing High Purity Welding Flux by the Sol Gel Process"

David Edward Bunnell (1986), T 2874, "Measuring Moisture Content in Low Hydrogen Welding Electrode Coverings"

Douglas D. Kautz (1987), T 3300, "Characterization and Morphology of Pulsed Electron Beam Welding on Type 31 6 9 Stainless Steel"

Kenneth Patrick Marts (1987), T 3343, "Use of the Hollow Electrode in GTA Welding and its Effects on Bead Morphology in Stainless Steel Weldments"

Christopher Nelson McCowan (1987), T 3349, "Cryogenic Strength, Toughness and Ferrite Content of Stainless Steel Welds"

Paul B. Maxwell (1987), T 3396, "The Infiltration Behavior of Aluminum into Silicon Carbide Compacts"

Dong Won Oh (1987), T 3415, "The Influence of Boron and Titanium on Low Carbon Microalloyed Steel Weld Metal"

David N. Meendering (1988), T 3566, "Electrodeposition of Hydrated Alumina from Aqueous Electrolytes"

Jonathan S. Ogborn (1988), T 3625, "An Examination of the Solidification Behavior and Microstructural Evaluation in Nickel Base Alloys"

Gerald L. Berry, Jr. (1988), T 3640, "Compositional Gradient Effects on Stress Corrosion Cracking Behavior of Weld Metal"

Kathy Marie Swan (1989), T 3568, "Flexural Strength and Other Aspects Related to Hydration of Tricalcium Silicate"

William J. Engelhard (1990), T 3627, "Dissolution of Gaseous Hydrogen in High Strength Steels at Elevated Temperature"

Clay Lawrence Taylor (1991), T-4060, "The Effect of Weldability of Alloy JBK-75 with Various Filler Metal Wire Additions"

Esa I. Kivineva (1991), T-4108, "Particulate Metal Matrix Composites as a Weld Deposit".

Robert Gustav Wendt, Jr. (1992), T-4257, "Development of Corrosion Resistant Aluminum Alloys for Graphite Fiber Composites".

Stanley W. Pierce (1993), T-4037, "Thermocapillarity and Arc Phenomena in Stainless Steel Welding".

Kirk Arthur Lindahl, (1993), T-4028, "Alloy Phase Analysis from Measurements of Bulk Electronics and Magnetic Properties".

David Arthur Fleming (1994), T-4389, "Development of a Shielded Metal Arc Welding for HSLA 100 Plate Steel".

Douglas William Wenman (1994), T-4528, "Phase Transformation and Mechanical Properties of Stainless Steel Laminate Composites".

Jeffrey William Allen (1994), T-4629, "Exothermically-Assisted Shielded Metal Arc Welding".

David Fazzina (1995), T-4687, "In Process Reaction Formed Hardfacing Materials".

Chad Anthony Lensing (1995), T-4478, "The Corrosion of Erbium Oxide Ceramic in Molten Cerium".

Joseph Daniel Skaggs (1997), "The Effect of Surface Contamination on the Laser Weldability of Titanium Alloy Ti-6Al-4V".

Jeffrey Lee Alleman (1998), "Molybdenum Thin Films: Adhesion and Sodium Diffusion".

Michael J. Johnson (1998), "Modeling and Development of Carburized Niobium Alloy for Resistance to Liquid Metal Corrosion".

Saisamorn Niyomsoan (1998), "The Optical Reflectivity and Color of ZrNi, TiN, and ZrTiN Thin Film Coatings"

Brian A. Roy (1999), "Use of Film Deposition in Fabrication of Charged Particle Spectrometer for Fusion Plasma Lost Ion Diagnostics" (with Professor E. Cecil).

Uriah David Otting (2000), T-5360, "Identification of Sigma Phase in Superalloys by Correlation with Electronic and Magnetic Properties".

Yen-Jung (Jim) Huang (2003), ME, "Coating Applications for Die-Casting Molds".

Lt. Sittha Saidarasamoot, RTN, (2003), T-5811, "Assessment of the Emerging Technologies for the Detection and Measurement of Corrosion Wastage of Coated Marine Structures".

Angelique Nicole Lasseigne, (2004), T-5899, "Non-Destructive Determination of Interstitial Nitrogen Content in Austenitic Stainless Steel Weld Metal Utilizing Thermoelectric Power".

Garrett John Atkins (2004), T-5916, "Microstructural Evaluation of Gas Tungsten Arc Welded Binary Magnesium-Lithium Alloys"

Lt. Swieng Thaunboon (2004), T-5439, "Statistical Assessment of Corrosion in Transverse Members of Single Hull Oil Tankers".

Gerhart Castro (2005), T-6006, Elemental Transfer Efficiencies of Manganese, Nickel, Chromium and Titanium I Metal-Cored Wire Welding".

William Michael Drake (2005), T-5989 "Utilizing 2.45 GHz Microwaves to Fabricate Braze Joints".

Glen S. Bigalow, (2006), "Effects of Palladium Content on Quarterary Alloying and Thermo-mechanical Processing on the Behavior of Ni-Ti-Pd Shape Memory Alloys for Actuator Applications".

Nathan Call, (2007), ME Eng. Rep., "Laser Scribing of Semi-Transparent Amorphous Silicon Photovoltaic Modules".

Daniel A Porpora, (2007), ME Eng. Rep.," Magnetic manipulation of Single Biomolecules with Spin-Values".

Ari Feldman (2007), ME Eng. Rep., " Photoelectrical Cells and Photoelectrode Development".

Marcelina Martinez (2007), "Determination of the Optimum Catalyst Level for Three Room Temperature Vulcanized Silicane Foam Formulations".

Angela Zamarron (2007), "Characterization pf Pure and Titanium Catalyzed Sodium Alanate Phases as a Function of Hydrogen Content in the Alpha/ Beta Region Utilizing Thermal Electric Power and Magnetic Susceptibility".

Gunnar W. Recht (2008), MS, ML Rep., "Fragment Size Effects on the Ballistic Limit Velocity of 2024-T351 Aluminum Plates".

Joshua Edmund Jackson, (2088), MS, " Magnetic Field Effects on Magnetocorrosion in Pipeline Steel".

Hussain Almahamedh, (2008), MS, " Microbiologically Infuenced corrosion on Pipeline Steel Used for Transportation of Oil".

© 2016 Colorado School of Mines | | Equal Opportunity | Privacy Policy | Directories | Text Only | Mines.edu | rss

 
Last Updated: 05/20/2016 14:27:57