Corinne Packard Research Group School Of Mines School Of Mines

2016 | 2015 | 2014 | 2013 | 2012 | 2011 | 2010

2006-2009 | Patents | Book Chapters



Wilkinson, T.M., Musselman, M.A., Boatner, L.A., Diercks, D.R., Packard, C.E., Indentation recovery in GdPO4 and observation of deformation twinning, AIP Advances, 6, 2016


Zargari, S., Wilkinson, T.M., Packard, C.E., Prasad, M., Effect of thermal maturity on elastic properties of kerogen, Geophysics, 81(2), 2016


Sweet, C.A., Schulte, K.L., Simon, J.D., Steiner, M.A., Jain, N., Young, D.L., Ptak, A.J., Packard, C.E., Controlled exfoliation of (100) GaAs-based devices by spalling fracture, Applied Physics Letters, 108 (1), 2016


Kumar, N., Wilkinson, T.M., Packard, C.E., Kumar, M., Design of low surface roughness-low residual stress-high optoelectronic merit a-IZO thin films for flexible OLEDs, Journal of Applied Physics, 119, 2016



Sweet, C.A., McNeely, J.E., Gorman, B., Young, D.L., Ptak, A.J., Packard, C.E., Engineering controlled spalling in (100)-oriented GaAs for wafer reuse, IEEE 42nd Photovoltaics Specialist Conference, 15664601, 2015



Diercks, D.R., Musselman, M., Kumar, M. Gorman, B.P., Packard, C.E., Microscopy of chemical and mechanical heterogeneities in lithium cobalt oxide. Microscopy and Microanalysis, 21, S3, 2015


Wilkinson, T.M., Zargari, S., Prasad, M., Packard, C.E., Optimizing nano-dynamic mechanical analysis for high-resolution, elastic modulus mapping in organic-rich shales. Journal of Materials Science, 50, 3, 2015


Spataru, S., Hacke, P., Sera, D., Packard, C., Kerekes, T., Teodorescu, R., Temperature-dependency analysis and correlation methods of in-situ power-loss estimation for crystalline silicon modules undergoing potential-induced degradation stress testing, Progress in Photovoltaic, 23,11, 2015



Rolston, J.S., Zilliox, S.H., Packard, C.E., Mitcham, C., Zaharatos, B., Nanoethics and Policy Education: a Case Study of Social Science Coursework and Student Engagement with Emerging Technologies. NanoEthics, 8, 3, 2014


Chang, W., Wang, A., Murarka, A., Akselrod, G.M., Packard, C., Lang, J.H., Bulovic, V., Electrically tunable organic vertical-cavity surface-emitting laser. Applied Physics Letters, 105, 7, 2014


Sweet, C.A., Simon, J.D., Young, D., Ptak, A.J., Packard, C.E. Effect of material choice on spalling fracture parameters to exfoliate thin PV devices. 2014 IEEE 40th Photovoltaic Specialist Conference (PVSC), 2014



Taylor, M.D., Choi, K.S., Sun, X., Matlock, D.K., Packard, C.E., Xu, L., Barlat, F. Correlations  between nanoindentation hardness and macroscopic mechanical properties in DP980 steels, Materials Science and Engineering: A, 597, 2014


Diercks, D.R., Musselman, M., Morgenstern, A., Wilson, T., Kumar, M., Smith, K., Kawase, M., Gorman, B., Eberhart, M., Packard, C.E., Evidence for Anisotropic Mechanical Behavior and Nanoscale Chemical Heterogeneity in Cycled LiCoO2. Journal of The Electrochemical Society 161, 11, 2014



Mitcham, C., Heller, L, Nan, W., Qin, Z., Packard, C., Holles, C., Hudson, D., Rolston, J.,Nanotechnology Ethics and Policy Education: Learning and Sharing Across Boundaries. Journal of Nano Education, 5, 2013


Kumar, M., Sigdel, A.K., Gennett, T., Berry, J.J., Perkins, J.D., Ginley, D.S., Packard, C.E., Optimizing amorphous indium zinc oxide film growth for low residual stress and high electrical conductivity. Applied Surface Science, 283, 2013


Periasamy, P., Bradley, M.S., Parilla, P.A, Berry, J.J., Ginley, D.S., O'Hayre, R.P., Packard, C.E., Electromechanical tuning of nanoscale MIM diodes by nanoindentation. Journal of Materials Research, 28: 14, 2013


Ramalingam, S., Packard, C.E., Reimanis, I.E. In-situ Diamond Anvil Cell–Raman Spectroscopy and Nanoindentation Study of the Pressure-Induced Phase Transformation in Pure and Zinc-Doped β–eucryptite. Journal of the American Ceramic Society, 96:6, 2013


Miller, D.C., Carloni, J.D., Johnson, D.K., Pankow, J.W., Gjersing, E.L., To, B., Packard, C.E., Kennedy, C.E., Kurtz, S.R., An Investigation of the Changes in Poly(Methyl Methacrylate) Specimens After Exposure to Ultra-Violet, Heat, and Humidity. Solar Energy Material & Solar Cells, 111, 2013



Madeni, J.C., Campos-Bravo, P., Liu, S., Packard, C.E., Flow and Microstructure of Co-Based Filler Metals on Stainless Steel and Intermetallic Phases Mechanical Property Determination by Nanoindentation, Proceedings of the 5th International Brazing & Soldering Conference, 2012


Packard, C. E., Wohlgemuth, J. H., Kurtz, S. R., Development of a Visual Inspection Data Collection Tool for Evaluation of Fielded PV Module Condition. 52 pp., NREL Report No. TP-5200-56154


Yu, J., Packard, C.E., Bulovic, V., Subtractive contact-patterning of molecular organic films. Organic Electronics, 13:10, 2012


Ramalingam, S., Reimanis, I.E., Packard, C.E., Determining Activation Volume for the Pressure-Induced Phase Transformation in β-Eucryptite Through Nanoindentation. Journal of the American Ceramic Society, 95:6, 2012 * article featured in Ceramic Tech Today



Packard, C.E., Aidala, K.E., Ramanan, S., Bulovic, V., Patterned Removal of Molecular Organic Films by Diffusion. Langmuir, 27, 2011


Periasamy, P., O'Hayre, R.P., Berry, J.J., Parilla, P., Ginley, D., Packard, C.E., A novel way to characterize Metal-Insulator-Metal devices via nanoindentation. Photovoltaic Specialists Conference (PVSC), 2011 37th IEEE, IEEE




Packard, C.E., Franke, O., Homer, E.R., Schuh, C.A., Nanoscale strength distribution in amorphous versus crystalline metals. Journal of Materials Research, 25:12, 2010 *invited feature paper


Trenkle, J.C., Packard, C.E., Schuh, C.A., Hot nanoindentation in inert environments. Review of Scientific Instruments, 81, 073901, 2010


Packard, C.E., Homer, E.R., Al-Aqeeli, N., Schuh, C.A., Cyclic hardening of metallic glasses under Hertzian contacts: Experiments and STZ dynamics simulations. Philosophical Magazine, 90: 10, 2010


Packard, C.E., Murarka, A., Lam, E.W., Schmidt, M.A., Bulovic, V., Contact-printed microelectromechanical systems. Adv. Materials, 22, 2010



Packard, C.E., Schroers, J., Schuh, C.A., In situ measurements of surface tension-driven shape recovery in a metallic glass. Scripta Mat., 60, 2009


Packard, C.E., Witmer L.M., Schuh, C.A., Hardening of a metallic glass during cyclic loading in the elastic range. Applied Physics Letters, 92, 171911, 2008


Packard, C.E., and Schuh, C.A., Initiation of shear bands near a stress concentration in metallic glass. Acta Materialia, 55, 2007


Schuh, C.A, Packard, C.E., Lund, A.C., Nanoindentation and contact-mode imaging at high temperature. Journal of Material Research, 21, 3, 2006



Bulovic, V., C. E. Packard, V.C. Wood,A. Murarka, G. Akselrod. (2015). Method and apparatus for forming MEMS device, US Patent 8,963,262.


Bulovic, V., C. E. Packard, J.J.H. Yu, A. Murarka, L. Kim. (2014). Method for microcontact printing of MEMS, US Patent 8,739,390.


Bulovic, V., C. E. Packard, J.J.H. Yu, A. Murarka, L. Kim. (2013). Method for forming a MEMS capacitor array, US Patent 8,601,658.


Book Chapters

Packard C.E., Wheeler J.M., Trenkle J.C., and Schuh C.A., Nanoindentation: High Temperature. In: Saleem Hashmi (editor-in-chief), Reference Module in Materials Science and Materials Engineering. Oxford: Elsevier; 2016. pp. 1-8.


Packard, C.E., Trenkle, J.C., Schuh, C.A., “Nanoindentation: High Temperature.”  In: K.H.J. Buschow, R.W. Cahn, M.C. Flemings, B. Ilschner (print), E.J. Kramer, S. Mahajan, and P. Veyssiere (updates), Editor(s)-in-Chief, Encyclopedia of Materials: Science and Technology, Elsevier, Oxford, 2010, Pages 1-6



Citation metrics at Prof. Packard's Google Scholar Site